• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 2005.03a
• /
• pp.252-257
• /
• 2005

비보강 조적조는 비균일재료로 이루어진 합성재료에 가까우므로 그거동이 하중종류와 구조물의 손상정도에 따라서 매우 달라지게 된다. 본 연구에서는 작은 지진부터 큰 지진까지 수차례의 모의 지진을 받는 구조물의 손상거동을 살펴보기 위한 방법으로, 시간영역 자료를 여러구간으로 나누어서 주파수가 어떻게 변화해 가는지 살펴보았다. 또한 주파수와 강도와의 관계식을 이용하여 단자유도계의 이선형모델도 유도하였다. 하중이 커짐에 따라서 이선형 모델의 강성은 계속적으로 저하됨을 알 수 있다. 실제로 실험결과는 누적된 손상을 받는 구조물의 거동이므로, 조적조의 수치해석적 모델의 개발시 이러한 누적된 손상효과를 합리적으로 처래해야 되는 문제점이 있다.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2010.04a
• /
• pp.692-695
• /
• 2010

일반적으로 모델개선에서는 부재단위의 강성을 파악하기 때문에 구조물의 취약부인 부재단부의 손상이 집중될 경우 손상의 형태를 세밀히 파악하기 어려우며 손상된 구조물의 거동을 정확하게 모사하기 어려운 단점이 있었다. 이를 해결하기 위해서는 부재 단부에 발생한 손상을 고려할 수 있는 좀 더 정밀한 해석 모델을 통한 모델개선이 필요하다. 본 연구에서는 부재 단부에 반강접 접합을 가지는 해석모델을 사용해 모델 개선을 실시하고 이를 통해 접합부의 손상 평가와 손상 구조물의 거동을 파악하였다. 제안된 방법을 5층 1경간의 RC 벽식 실험체의 손상탐지에 적용하였으며 그 결과 부재단위 모델을 사용할 때보다 더욱 정확하게 구조물의 손상을 평가하고 거동을 모사할 수 있었다.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2009.04a
• /
• pp.18-20
• /
• 2009

입자 강화 복합재료 내에서의 다양한 손상 메커니즘은 복합재료의 전체 거동을 예측에 상당한 영향을 미친다. 이에 본 연구에서는 입자 강화 복합재료 내에서의 누적 손상을 고려한 미세역학 기반 탄소성 모델(Kim and Lee, 2009)을 소개하고자 한다. Kim and Lee (2009)에 의해서 입자 강화 복합재료의 탄소성 모델을 위해 입자 강화 복합재료 내 계면에서의 누적 손상 및 기지재의 연성 거동이 고려되었다. 제안된 모델을 이용한 입자 강화 복합재료의 탄소성 거동 예측값은 관련된 실험값 (Llorca et al., 1991)과의 비교를 통해 수치해석을 수행하였다.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2011.04a
• /
• pp.123-126
• /
• 2011

본 논문에서는 점탄성 매트릭스와 탄성 강화입자로 구성된 복합재료의 크리프 거동예측을 미세역학 기반의 시뮬레이션을 통하여 수행하였다. 에폭시 고분자로 이루어진 복합재료의 경우 재료 특성상 탄성적 거동뿐 아니라 점성적 거동도 함께 발생하게 된다. 이렇듯 점탄성 거동을 보이는 재료의 경우 탄성만을 고려한 해석방법으로는 한계가 있으며 점성적인 특성 또한 고려되어야 한다. 점탄성 복합재료의 해석을 위해서 손상을 고려한 미세역학 기반의 해석 (Ju and Chen, 1994) 과 Mesquita and Coda (2002)의 근사식을 사용하였다. 이를 통해 구한 재료 물성은 복합재료의 크리프 거동예측을 위한 Kelvin-Voight (KV) 모델과 Standard Linear Solid (SLS) 모델에 적용되었다. 최종적으로 본 연구에서 제안한 손상을 고려한 점탄성 모델의 예측과 시험결과를 비교 수행하여 결과의 타당성을 검증하였다.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.13 no.2
• /
• pp.257-270
• /
• 2000

The objective of this study is to develop a damage model based on damage mechanics that can be used to analyze the mechanical behavior of structures with defects and the global behavior of damaged structures. A modified second order damage tensor that can be applied to finite element analysis is used to reflect the effect of damage. The damage stress computed from the effective stress is considered as an additional loading term acting on nodes and can represent the effect of crack surface. The accuracy of the proposed algorithm is verified by comparing the analysis results with the experimental data from other studies and the analysis results based on transverse isotropic theory. The developed damage model is applied to the analyses of structures with cracks under linear elastic condition. The comparisons confirmed that the quantitative analysis of the structural behavior due to crack orientation and multiple sets of cracks is possible. Also, the damage caused by rock excavation and fault zone is analyzed. The results also showed that the developed model can effectively analyze the global behavior of damaged structures.

• Journal of the Korean Institute of Gas
• /
• v.9 no.4 s.29
• /
• pp.6-10
• /
• 2005

This paper was studied on the damage behavior of stainless steel (STS 304) for gas boiler with specific resistance. The electrochemical polarization test of STS304 for gas boiler was carried out. And the anodic polarization and damage aspect, such as pitting corrosion, was considered. With being low specific resistance, the passive current density of STS 304 increases, passive region and pitting potential is low. Also, the patting aspect of STS304 In specific resistance $74{\Omega}{\cdot}m$ water little appears, the pitting number increases and the damage behavior, such as pitting aspect, gradually grow bigger with being low specific resistance.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.18 no.6
• /
• pp.60-71
• /
• 2014

Cable-stayed bridge, which is one of the representative long-spanned bridge, needs prompt maintenances when a stay cable is damaged because it may cause structural failure of the entire bridge. Many researches are being conducted to develop abnormal behavior detection algorithms for the purpose of shortening the reaction time after the occurrence of structural damage. To improve the accuracy of the damage detection algorithm, ample observation data from various kinds of damage responses is needed. However, it is difficult to measure an abnormal response by damaging an existing bridge, numerical simulation can be an effective alternative. In most previous studies, which simulate the damage responses of a cable-stayed bridge, the damages has been considered as a load variation without regard to its stiffness variation. The analyses of using these simplification could not calculate exact responses of damaged structure, though it may reserve a sufficient accuracy for the purpose of bridge design. This study suggests Gradual Bilinear Method (GBM) which simulate the damage responses of cable-stayed bridge considering the stiffness and mass variation, and develops an analysis program. The developed program is verified from the responses of a simple model. The responses of a existing cable-stayed bridge model are analyzed with respect to the fracture delay time and damage ratio. The results of this study can be used to develop and verify the highly accurate abnormal behavior detection algorithm for safety management of architecture/large structures.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.9 no.3
• /
• pp.251-261
• /
• 2007

This study is to investigate the damage assessment of adjacent structures due to tunneling in urban environment. Model tests were carried out with two-story masonry building structures in various shapes and locations. The damage level of adjacent structures were very differently estimated in accordance with the shape ratio (L/h) of structures, construction stages, and various locations. The results of model tests were plotted on the damage level graphs in order to predict the direction of damage levels for the different types of structures (i.e. stiffness of structures, L/h). The progressive crack development mechanism at various construction stages was revealed through model tests and crack size indicated more conservative side of damage level on the damage level graph.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.1A
• /
• pp.115-123
• /
• 2008

The performance prediction of fiber-reinforced composites has attracted engineer's attention in many fields, and the various theoretical and numerical methods have been proposed to predict the behavior of the fiber-reinforced composites. An evolutionary damage model for progressive interfacial debonding between circular fibers and the matrix is newly incorporated into the micromechanics-based elastoplastic model proposed by Ju and Zhang (2001) in this framework. Using the proposed model, a series of numerical simulations are conducted to illustrate the elastoplastic behavior and evolutionary damage of the framework. Furthermore, the influence of the evolutionary interfacial debonding on the behavior of the composites is investigated by comparing it with the result of a stationary damage model.

• Composites Research
• /
• v.32 no.5
• /
• pp.258-264
• /
• 2019

In this paper, a progressive failure analysis method was developed using the Hashin failure criterion and crack band model. Using the failure criterion, the failure initiation was evaluated. If the failure initiation is occurred, the damage variables at each failure modes (fiber tension & compression, matrix tension & compression) was calculated according to linear softening degradation behavior and the variables are used to derive the damaged stiffness matrix. The damaged stiffness matrix is reflected to damaged material and the progressive failure analysis is continued until the damage variables to be 1 that complete failure of material. A series of processes were performed using FE commercial code ABAQUS with user defined material subroutine (UMAT). To evaluate the proposed progressive failure model, the experimental results of open hole composite laminate tests was compared with numerical result. Using digital image correlation system, the strain behavior also was compared. The proposed numerical results were coincided well with the experimental results.