• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2011.04a
• /
• pp.40-43
• /
• 2011

최근, 레이저 초음파 영상화 기법은 구조물의 비접촉식 손상 진단을 위해 널리 연구되고 있다. 초음파 영상화 기법의 가장 큰 장점은 비접촉식으로 구조물의 손상을 진단할 수 있고, 가진 및 측정 지점을 자유로이 이동할 수 있다는 점이다. 따라서 이는 고온이나 동적상태의 구조물에 적용이 가능하며, 시간과 공간상의 충분한 데이터를 획득할 수 있으므로 역문제 (Inverse problem)를 해결할 필요 없이 완전한 초음파의 전파 형상을 얻을 수 있다. 지난 연구들에서는 충분한 가진력 혹은 측정 민감도를 확보하기 위해 가진 레이저와 부착형 센서의 조합이나 부착형 가진 트렌스듀서와 센싱 레이저의 조합으로 초음파 영상을 획득하고자 하였다. 하지만 이들 조합은 가진 혹은 측정 지점이 구조물에 부착되어 있어 완전한 비접촉식 기법을 구현하지 못하였다. 이를 극복하고자 레이저와 EMAT 센서 등의 조합이 시도되어 왔으나, 이 또한 EMAT 센서의 적용 거리에 따른 한계점을 지니고 있다. 본 연구에서는 가진 레이저 (Nd:Yag)의 스캐닝을 통해 다양한 가진 점에서 발생된 초음파가 탄성체 구조물을 통해 전파되고, 이를 센싱 레이저 (Laser Doppler Vibrometer)를 이용하여 측정함으로써 비접촉식 초음파 영상화를 구현하였다. 나아가, 정상파 필터(Standing-wave filter)를 이용하여 구현된 초음파 영상으로부터 손상 영향만 검출해 내는 기법을 개발했다. 개발된 기법은 복합재 시편의 층간박리 (Delamination) 진단을 통해 검증하였다.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 1997.04a
• /
• pp.144-151
• /
• 1997

구조물로부터 측정된 가속도 시간이력을 이용하여 구조손상을 찾아내고 평가하는 기법을 제시하였다. 구조계의 손상을 찾아내는 알고리즘의 주요한 수단으로써 parametric system identification 방법을 사용하였고 매개변수화된 구조물의 최적 매개변수를 추정하기 위해 구속된 비선형 최적화기법을 사용하였다. 손상된 부재를 분리하기 위한 방법으로서 적합적 매개변수 모음법을 적용하였고 손상의 정도를 통계적으로 평가하기 위하여 측정된 가속도 시간이력에 time window 기법을 적용하였다. 가속도 이력 측정에 있어서의 불충분성과 측정오차를 고려하여 알고리즘을 개발하였고, 조화진동하중으로 구조물을 가진하여 구조 손상을 진단하는 수치모의 실험을 실시하였다.

• Korean Journal of Biological Psychiatry
• /
• v.2 no.2
• /
• pp.169-176
• /
• 1995

두부 외상은 많은 발생율과 사망율을 차지하고 있으며, 건강한 생활을 위해 큰 관심을 갖게 되었다. 신경방사선영상은 외상성 뇌손상 환자들의 진단과 치료에 필수적인 방법이다. 뇌손상의 기본 기전, 병리, 그리고 영상 소견을 이해 하는 것은 매우 중요하다. 1970년대에 Glasgow coma scale의 형상과 전산화단층촬영(CT)의 발달은 임상의사들이 두부외상에 대한 평가와 환자들의 경과를 예상하는데 극적인 변화를 주었다. 최근 자기공명영상(MRI)의 발달로 외상성 뇌손상의 형태를 더욱 이해 하게 되었고, 두부 외상의 발견율이 높아지게 되었다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.12
• /
• pp.1269-1274
• /
• 2014

Since power and control cables have narrow bandwidth due to their loss at high frequencies, it is difficult to detect the weak fault using conventional reflectometry. It is because the reflected wave caused by the weak fault is overlapped and hidden by the ripple of the strong reflected wave from the end of the cable. This paper proves that the reflected wave from the weak fault can be considered to be linearly superposed on the strong reflected wave from the end of the cable based on the transmission line theory. Then, the weak fault point is experimentally diagnosed using the difference between reflection coefficients before and after the fault generation.

• The Journal of the Acoustical Society of Korea
• /
• v.28 no.4
• /
• pp.308-317
• /
• 2009

In the present work, a sensor system composed of an oscillator sensor and a Lamb wave sensor is proposed for the purpose of structural health monitoring. The oscillator sensing system detecting the shift of a structural resonant frequency in proportion to the amount of defects in the structure is a pretty sensitive and simple device, but its detectable range is limited to its local zone. The Lamb wave sensor system, however, is applicable to global detection of the defects. This study is aimed at investigating the feasible combination of the two systems to exploits their merits simultaneously. The scheme to use PZT patches as the oscillator sensor as well as the Lamb wave sensor was proposed to identify the position, length and number of cracks by means of TOF and amplitude of signals, and its validity was confirmed through experiments.

• Journal of Chest Surgery
• /
• v.43 no.6
• /
• pp.675-680
• /
• 2010

Background: The aim of this study was to identify the distinguishing clinicoradiologic findings of traumatic tracheobronchial injury. Material and Method: Between January 2003 and December 2009, six patients who underwent surgical repair for traumatic tracheobronchial injury due to blunt trauma were included in this study. We evaluated the mechanism of the injury, the coexisting injuries, the time until the making diagnosis and treatment, the diagnostic methods, the anatomic location of the injury and the surgical outcomes. Result: The mechanisms of injury were traffic accident and crushing forces. The frequent symptoms were subcutaneous emphysema, dyspnea and pain, and the common radiologic findings were pneumothorax, mediastinal emphysema, rib fracture and lung contusion. Only 2 patients were diagnosed by chest CT and the others were not diagnosed preoperatively. The location of injury was the trachea in 2 patients and the bronchial tree in 4 patients. There was no postoperative mortality or anastomotic leak; however, vocal cord palsy occurred in one patient. The most distinguishing sign was persistent lung collapse even though the chest tube was connected with negative pressure. Conclusion: Although it was not easy to diagnose traumatic tracheobronchial injury without a clinical suspicion, the distinguishing clinical symptoms and CT findings could help to make an early diagnosis without performing bronchoscopy.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2005.05a
• /
• pp.311-318
• /
• 2005

이 논문은 다른 종류의 유도전동기 구름베어링 손상을 유도전동기 고정자 전류신호해석을 통하여 검출하고 실시간으로 손상을 진단하는 알고리즘을 개발하였다. 유도전동기 구름베어링의 손상을 검출하기 위하여 정상적인 베어링을 갖는 유도전동기, 축정열에 불량을 가지고 있는 전동기와 베어링 외륜에 구멍을 가지고 있는 2가지 종류의 비정상 베어링을 갖는 유도전동기 3set를 실험시스템을 구축하였다. 또한 유도전동기의 구름베어링시스템의 비정상적인 상태에서 고정자전류을 검출하기 위하여 TMS320F2407 DSP 칩을 이용하여 데이터 획득보드를 개발하였다. 이 고정자전류신호를 해석을 통하여 베어링 손상을 검출하기 위한 방법으로 FPT, 웨이브렛 분석 및 내적에 의한 평균신호패던에 의한 분석결과를 제시하였다. 특히 내적에 의한 신호분석을 통하여 베어링 손상 여부를 실시간으로 진단할 수 있는 새로운 알고리즘과 분석방법을 제시하였다.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.23 no.7
• /
• pp.129-136
• /
• 2019

In this study, the magnetic flux leakage technique was applied to diagnose steel plate damage, imaging technique was applied through those signals. Steel plate specimens with different thicknesses were prepared for the imaging the magnetic flux leakage signal, and 6 different depths of damage were artificially processed at the same locations on each specimen. The sensor head consist hall sensor and magnetization yoke was fabricated to magnetize the steel plate specimen and measure the magnetic flux leakage signal. In order to remove the noise and increase the resolution of the image in the signal collected from the hall sensor, various of signal processing was performed. P-P value was analyzed for each channel to analyze the magnetic flux leakage signals measured from each damaged part. Based on the above processed signals and analysis, it was converted into heatmap image. Through this, it was possible to identify the damage on the steel plate at glance by imaging magnetic flux leakage signal.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.10 no.6
• /
• pp.113-123
• /
• 2006

As Cable-stayed bridges were constructed to the long span, they have become bigger and had weaknesses to vibration induced by earthquake, wind and vehicle loads. Structural damages induced by these loads affect the characteristic of vibration modes of structure. Damage detection of cable-stayed bridges by using existing safety diagnosis is difficult to detect the characteristic change of overall structural action. Also it requires very much time and cost. So in this study, the investigation of characteristic change of structural action and the detection of structural damages is analyzed by using characteristic properties of vibration mode before and after structural damage.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.26 no.6
• /
• pp.93-101
• /
• 2022

RC Slab bridges in Korea account for more than 70% of the total bridges for more than 20 years of service. As the number of aging structures increases, the importance of safety diagnosis and maintenance of structures increases. For highway bridges, cracks are a main cause of deck deterioration, which is very closely related to the decrease in bridge durability and service life. In addition, the damage rate of expansion joints and bearings accounts for approximately 73% higher than that of major members. Therefore, this study defined damage scenarios combined with devices damages and deck deterioration. The stress distribution and maximum stress on the deck were then evaluated using design vehicle load and daily temperature gradient for single and combined damage scenarios. Furthermore, this study performed damage-spread analysis and predicted condition ratings according to a deck deterioration model generated from the inspection and diagnosis history data of cracks. The heterogeneous damages combined with the member damages of expansion joints and bearings increased the rate of crack area and damage spread, which accelerated the time to reach the condition rating of C. Therefore, damage to bridge members requires proper and prompt repair and replacement, and otherwise it can cause the damage to bridge deck and the spread of the damage.