• Nuclear Engineering and Technology
• /
• v.1 no.2
• /
• pp.91-101
• /
• 1969

Resistivity changes of n-type float-zone silicon crystals with 6.4$\times$10$^{14}$ to 1.25$\times$10$^{17}$ phosphorus atoms/㎤ due to irradiation by (1) 1 MeV electrons, (2) two types of research reactors, and (3) $Co^{60}$ ${\gamma}$-ray sources were investigated. The results were analyzed on the basis of a simple exponential formula derived by Buehler. While the formula gave a fair fit in the low fluence range in most cases, the deviation was quite appreciable in the case of 1 MeV electron irradiation, and a linear change gave better fit in some cases. The large change in the carrier removal rate in electron-irradiated samples in the high fluence range was analyzed in detail in terms of the Fermi level cross-over of the defect levels. Based on the damage constants evaluated from the initial portion of data where the formula was applicable, the relative effectiveness of various radiation sources in causing the resistivity change in n-type silicon was compared. The TRIGA Mark II reactor neutrons, for example, were found to be about 40 times more effective than 1 MeV electrons. The dependence of the damage constant on the initial carrier concentration was also examined. The physical basis of the exponential law and the effect of the Fermi level cross-over of the defect levels on the resistivity change in the high fluence ranges are discussed.

• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.6 s.183
• /
• pp.143-150
• /
• 2006

Recently, in proportion to increased demand on environmentally-friendly heat source, efficient management of district heating(DH) system becomes one of important issue. The objectives of this paper are to systematize data processing of transition temperature, investigate the effect of temperature variations on thermal fatigue and find out a way to improve design fractures of Korean DH pipes. For this purpose, reliable fatigue lift evaluation procedures are examined and applied to quantify thermal fatigue lives. Also, as a prototypal optimization analysis results, mean value of original cross sectional area of selected pipes was reduced 18.6% sustaining their sufficient margins against fatigue failure. So, it is anticipated that the output of this research can be used as useful information of optimal design and operation in the future.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2000.10a
• /
• pp.759-762
• /
• 2000

무선 채널 네트웍은 광범위하고 높은 에러발생률의 특성이 있다. 에러발생으로 인한 패킷의 손상이나 분실의 경우 화질에 심각한 영향을 미치게 된다. 본 논문에서는 DCT(Discrete Cosine Transform)을 기반으로 하는 고 압축 이미지의 손상된 데이터를 복구하기 위해 DCT 영역내 계수들의 분포 특성과 인접한 블록간의 유사성을 이용한 간단한 이미지 재구성 기법을 제안한다. 이러한 기법은 DCT 기반의 다양한 응용에 적용이 가능하며 적은 계산량을 가짐으로써 시스템의 낮은 전력 소모를 유지하여 무선컴퓨팅환경의 응용에 적합할 것이다.

• Journal of Advanced Marine Engineering and Technology
• /
• v.23 no.4
• /
• pp.453-461
• /
• 1999

The estimation of fatigue life at the design stage is very important in order to arrive at feasible and cost effective solutions considering the total lifetime of the structure and machinery compo-nents. In this study the practical procedure of prediction of fatigue life by use of cumulative damage factors based on Miner-Palmgren hypothesis and probability density function is shown with a $135,000m^3$ LNG tank being used as an example. In particular the parameters of Weibull distribution taht determine the stress spectrum are dis-cussed. At the end some of uncertainties associated with fatigue life prediction are discussed. The main results obtained from this study are as follows: 1. The practical procedure of prediction of fatigue life by use of cumulative damage factors expressed in combination of probability density function and S-N data is proposed. 2. The calculated fatigue life is influenced by the shape parameter and stress block. The conser-vative fatigue design can be achieved when using higher value of shape parameter and the stress blocks divded into more stress blocks.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2008.05a
• /
• pp.167-168
• /
• 2008

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.05b
• /
• pp.525-530
• /
• 1996

1000 MWe 국내 표준발전소의 증기관 파단사고에 대한 초기 노심 유량의 영향과 감속재 반응도 값의 영향을 증기관 파단사고시의 핵연료 건전성 관점에서 고찰하였다. 최대 핵연료 손상은 원자로 정지 후 약 2.5초 정도에 발생하였으며, 초기 노심 유량이 클수록 더 많은 핵연료 손상이 예측되었다. 또한, 감속재 반응도 값에 대한 분석 결과, 최소 핵비등이탈률 발생 싯점에서의 감속 재 반응도 계수를 사용한 해석 방법이 타당한 것으로 나타났다.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.12 no.6
• /
• pp.50-55
• /
• 2003

This study proposed the analysis of damage detection due to the change of the stiffness of structure by using the original and modified dynamic characteristics. The present approach allows the use of composite data which consist of eigenvalues and eigenvectors. The suggested method is applied to examples of a cantilever and 3 degree of freedom system by modifying the stiffness. The predicted damage detections are in good agreement with these from the structural reanalysis using the modified stiffness.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.760-763
• /
• 2003

This study proposed the analysis of damage defection due to the change of the stiffness of structure by using the original and modified dynamic characteristics. The method is applied to examples of a cantilever and 3 degree of freedom by modifying the stiffness. The predicted damage detections are in good agreement with these from the structural reanalysis using the modified stiffness.

• Tunnel and Underground Space
• /
• v.21 no.5
• /
• pp.359-369
• /
• 2011

In this study, physical, mechanical, and thermal properties of rock samples were investigated to estimate the Excavation Damaged Zone (EDZ) developed during the construction of the KAERI Underground Research Tunnel. The average porosity in the EDZ was increased by about 140%. The average wave velocity, Young's modulus, and uniaxial compressive strength in the EDZ were decreased by about 11, 37, and 16%, respectively. And the thermal conductivity in the EDZ was decreased by about 20%. From the laboratory tests, the EDZ size could be estimated to be around 1.1-2.4 m.

• Journal of Korea Multimedia Society
• /
• v.7 no.3
• /
• pp.308-318
• /
• 2004

A subject to recognize the damaged facial image is becoming an important issue in commercialization of automatic face recognition. The method to recognize a face on a damaged image is divided into two types. The one is to recognize remainders after removing the damaged information and the other is to recognize a total face after recovering the damaged information. On this paper, we present the reconstruction method by analyzing the main materials after extracting the damaged region through Kohonen network. The suggested algorithm in this paper estimates feature vectors of the damaged region using eigen-faces in PCA and then reconstructs the damaged image. This allows also the reconstruction under the untrained images. Through testing the artificial images where the eye and the mouth which have many effects to face recognition are damaged, the recognition rate of the proposed results showed similar results with the method which used Kohonen network, and improved about 11.8% more than symmetrical property method. Also, in case of the untrained image, our results improved about 14% more than that of the Kohonen method and about 7% more than that of the symmetrical property method.