• KSCE Journal of Civil and Environmental Engineering Research
• /
• 제28권1C호
• /
• pp.63-74
• /
• 2008

Site response analyses were performed based on equivalent linear technique using the local geologic and dynamic site characteristics, which include soil profiles, shear wave velocity profiles and depth to bedrock for 125 sites collected in Korean Peninsula. From the results of site response analyses, 2-parameters site classification system based on the combination of mean shear wave velocity of soil and depth to bedrock was newly recommended for regions of shallow bedrock depth in Korea. First, as the borders of bedrock depth (H) for site classification were determined as 10m and 20m, the soil sites were divided into 3 classes as $H_1$, $H_2$ and $H_3$ sites. And then, the 3 site classes were subdivided into 7 classes based on the mean shear wave velocity of soil ($V_{s,soil}$). The feasibility of new site classification system was verified and the representative site coefficients ($F_a$ and $F_v$) and design response spectrum were suggested by analyzing uniform trend and dispersion of site coefficients for each site class. The suggested site coefficients and the regression curves present the nonlinear characteristics of soils according to the change of rock outcrop acceleration with uniform trend effectively. From the comparison between the mean values of response spectrum which was acquired from the site response analysis and the suggested design response spectrum, there was a little difference in some of site classes and it was verified to adjust the integration interval to make it more suitable for the site condition in Korea.

• Polymer(Korea)
• /
• 제25권5호
• /
• pp.736-743
• /
• 2001

An electro- active polymer (EAP) (poly(2-acrylamido-2- methyl propane sulfonic acid), PAMPS) gel crosslinked with N,N-methylenebisacrylamide (MBAA) has been prepared by free radical polymerization in aqueous solution with potassium persulfate as initiator PAMPS gel was swollen in surfactant solution to substitute surfactant for using as actuator. PAMPS gel showed a large movement in the surfactant solution by electric field. PAMPS gel showed the reversible binding and fast response rate. Bending mechanism of gel is related to the cooperative process of hydrophobic interaction, swelling-deswelling of gel and the electrostatic attraction between anode (+) and the anions of PAMPS gel. The response rate of PAMPS gel was increased as the applied potential and the degree of cross-linkage were increased. The response rate was increased as the bending cycle was repeated, but it was decreased with increasing the gel thickness.

• Proceedings of the Korea Contents Association Conference
• /
• 한국콘텐츠학회 2007년도 추계 종합학술대회 논문집
• /
• pp.84-88
• /
• 2007

In a general tendency that DBMS is used as a tool for storing large size of triple knowledge, it still remains in issue that which DBMS schema should be designed for storing, managing, inferring, and querying the triple knowledge efficiently. In this paper, we present, in the view point of efficient query process, a method that processes a query using Expanded Class-Property Views (ECPV) and, as a result, improvement in response time. The response time of DBMS-based inference systems is proportioned to table size and the number of table join operations. The more query is complex, the more join operations it requires, and the longer response time it requires. ECPV is a table obtained by processing possible join operations before queries. To use ECPV in the query process, SPARQL queries should be converted into corresponding ECPV-based SQL queries. This paper describes the conversion process and shows the improvement in response time by experiments.

• The Journal of the Korea Contents Association
• /
• 제2권4호
• /
• pp.51-58
• /
• 2002

A electronic business user is increased rapidly, and load of a electronic business system and network traffic are increased rapidly. Also, the data which included an audio and video is increasing in a electronic business system gradually, and According to this an Internet service businessman is paying for an enormous cost for management of a system and a maintenance of a line. It is brought a delay of a response speed about a service wish of a Web customer this system load and network traffic raise. Also, this decreases customer satisfaction and becomes an important factor to decrease competitive power of an e-business enterprise. In this study, we proposed the electronic business system that improved answer delay time about a Web customer in an e-business system based on the .net which was a the latest version of Microsoft company, and analyzed performance of a proposal system through an experiment. In the experiment result, the system that proposed it can have response time to have been improved and fast adaptability about various requests of a Web customer. Also, in a proposed system, a decrease gets a delay of a response speed to occur because of the multiple user done.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• 제10권7호
• /
• pp.1085-1094
• /
• 1999

In the global system for the mobile communication (GSM) system, the class of training sequences used in a TDMA frame is a preamble sequence with a period of 16 bits for the channel impulse response measurement and the start up equalization during the training period. If the transmitted preamble sequence and the binary sequence in the receiver properly satisfy a condition, this training sequences used for fastly adjusting the tap coefficients and impulse response can be measured by calculating the crosscorrelation function. In this paper, it is used that training sequences have zero values of the autocorrelation at all delays except zero and middle shifts. A comparison of convergence rate, a mathematical approach for fast start-up equalization and correctly channel impulse response measurement are proposed.

• The KIPS Transactions:PartC
• /
• 제10C권5호
• /
• pp.617-624
• /
• 2003

This paper proposes a modified DCPC (Distributed Constrained Power Control, M-DCPC) algorithm that can improve the performance of a CDMA power control system. The control performance of the proposed method is verified using two performance measures : the SIR response of each mobile and the outage probability in a cell. As regards the SIR response, in simulations, the M-DCPC algorithm has shown a faster convergence and lower overshoot in transient time than the other power control algorithms when the desired SIR value was varying. For the outage probability. M-DCPC converged to a fixed outage rate faster than CSOPC while also maintaining the system capacity to make as high a connection as CSOPC. In particular, when the desired SIR was varying, CSOPC showed an abrupt outage probability increase during the desired SIR Increase, yet M-DCPC was unaffected.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• 제35권3호
• /
• pp.289-297
• /
• 2011

The explicit finite element method is an essential tool for solving large problems with severe nonlinear characteristics, but its results can be difficult to interpret. In particular, it can be impossible to evaluate its acceleration responses because of severe discontinuity, extreme noise or aliasing. We suggest a new post-processing method for transient responses and their response spectra. We propose smoothing methods using a Gaussian kernel without in depth knowledge of the complex frequency characteristics; such methods are successfully used in the filtering of digital signals. This smoothing can be done by measuring the velocity results and monitoring the response spectra. Gaussian kernel smoothing gives a better smoothness and representation of the peak values than other approaches do. The floor response spectra can be derived using smoothed accelerations for the design.

• Proceedings of the KIEE Conference
• /
• 대한전기학회 2000년도 하계학술대회 논문집 B
• /
• pp.1090-1092
• /
• 2000

철강 생산라인 중에서도 핵심적인 열간압연 라인의 연속 사상압연 공정을 소개하고 스탠드간에 위치한 루퍼의 각도 제어와 장력제어의 상호 관계를 설명하였다. 또한 압연용 전동기 속도 제어계 특성의 설계법을 보였다. 이와 같은 연속 압연 공정에서는 철판이 여러 압연기에 동시에 물려있는 상태로 운전되므로 인접한 압연기들의 속도 제어 응답성이 동일한 특성을 갖는 것이 필요하다.

• Journal of the Society of Naval Architects of Korea
• /
• 제39권2호
• /
• pp.11-18
• /
• 2002

In this paper, the method calculating hydroelastic responses of very large floating structure close to a breakwater in waves is presented. The source-dipole distribution method is used to calculate the generalized radiation problem considering breakwater effects and the diffraction problem is analyzed by using the source-dipole distribution andvelocity potential continuation method. The response of a VLFS is approximated by anexpansion in terms of a free-free beam. Calculated model is a VLFS with 1000m in length in a sea with a straight breakwater. The vertical displacements and bonding moments around a VLFS are calculated by variations for distance between a VLFS and a breakwater and incident wave angle to know the effect of a breakwater.

• The Transactions of the Korean Institute of Power Electronics
• /
• 제9권6호
• /
• pp.602-611
• /
• 2004

Servo system has commonly adapted PI controller with fixed gains, because of its simplicity and determinative relationship among the parameters. The fixed gains PI system may be applied well to some operation conditions, but not non-linearities, complex and time variant operation conditions. For solving these problems, another conventional method, 'variable gun schedule according to speed', is published. The value of gain is determined according to the absolute value of the mover real speed. In this paper, FSTPIC(Fuzzy Self-Tuning PI Controller) is proposed based on various experiences to rapidly reduce speed error and to secure a good speed response characteristics. The effectiveness of proposed algorithms is demonstrated by comparing to two conventional gain systems via 4-quadrant operation.