• Journal of the Korean Magnetics Society
• /
• v.1 no.2
• /
• pp.22-30
• /
• 1991

고주파 마그네트론 스퍼터링법으로 제조된 순철박막에 대해 증착속도, 미세구조 및 자기특성에 미치는 스퍼터링조건의 영향을 조사하였다. 증착속도는 기판에 자장을 가할 경우 현저히 증가햐였으며, 이는 자장에 의한 Ar 이온의 증가효과로 고찰되었다. 투입전력이 커질수록 결정립 크기와 격자상수가 증 가하였으며 (110)면이 강하게 발달하였다. Ar 압력의 증가에 따라 격자상수는 작아졌으나 결정립 크기는 거의 변화하지 않았다. 기판자장을 가하면서 60W에서 제조한 순철박막의 자화곤란방향이 가장 낮은 약 30e의 보자력을 나타내었다. 보자력은 5mTorr 이상의 Ar 압력에서 급증하는 경향을 보였으며, 이는 표면 이 거칠어진 효과 및 제2상의 효과로 고찰되었다. 두께에 따른 보자력의 변화는 50-200nm 두께의 범위에 서 Neel의 관계를 잘 만족하였다.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2011.11a
• /
• pp.155-158
• /
• 2011

유속을 측정하기 위한 다양한 기법들 가운데 양방향 저속 차압 프로브(bi-directional low velocity pressure probe)는 고온의 연소생성물이 존재하는 조건에서 화재유동장의 속도 측정에 가장 적합한 방법으로 인식되어 왔다. 그러나 양방향 유속계의 프로브 상수(probe constant)는 레이놀즈 수와 유동과 프로브의 받음각(attack angle)에 크게 영향을 받게 된다. 본 연구에서는 화재유동장 측정 기법들을 비교 평가하고 양방향 유속계의 받음각에 따른 프로브 상수의 변화를 실험적으로 평가하여 양방향 유속계의 측정 오차를 정량함으로서 화재 유동장 측정의 신뢰성 향상을 위한 기초자료를 제공하고자 한다.

• Journal of the Korean Chemical Society
• /
• v.29 no.5
• /
• pp.472-477
• /
• 1985

The rates for the aquation of $cis-[Co(en)(NH_3)_2Cl_2]Cl in acetone-water mixtures have been measured at various pressures and temperatures by the electric conductivity method. The rate constant measured at 25$^{\circ}$C in pure water solvent is 3.47 ${\times}10^{-4}$/sec. Rate constants are increased with increasing temperature, and decreased with increasing pressure and mole fraction of acetone. Activation volumes and other activation parameters are calculated from these rate constants. The activation volumes are all positive and lie in the limited range +2.82~+$8.2cm^3$/mole. The rate constants in aqueous acetone solution are analyzed with the solvent compositions. Plots of log $k_{obs}$ vs. Grunwald-Winstein Y values show that log $k_{obs}$ varies linearly and the gradients are about 0.25. The applications of a free energy cycle relating the process initial state ${\to}$ transition state in water to that in acetone-water mixture show that the changes in solvation of the transition state have a dominant effect on the rate. From these results the aquation of this complex would be discussed in terms of dissociative mechanism ($I_d$).

• Korean Journal of Food Science and Technology
• /
• v.37 no.6
• /
• pp.1012-1017
• /
• 2005

Predictive growth model of putrefactive bacteria of surimi-based imitation crab in the modified surimi-based imitation crab (MIC) broth was investigated. The growth curves of putrefactive bacteria were obtained by measuring cell number in MIC broth under different conditions (Initial cell number, $1.0{\times}10^2,\;1.0{\times}10^3$ and $1.0{\times}10^4$ colony forming unit (CFU)/mL; temperature, $15^{\circ}C,\;20^{\circ}C\;and\;25^{\circ}C$) and applied them to Gompertz model. The microbial growth indicators, maximum specific growth rate constant (k), lag time (LT) and generation time (GT), were calculated from Gompertz model. Maximum specific growth rate (k) of putrefactive bacteria was become fast with rising temperature and fastest at $25^{\circ}C$. LT and GT were become short with rising temperature and shortest at $25^{\circ}C$. There were not significant differences in k, LT and GT by initial cell number (p>0.05). Polynomial model, $k=-0.2160+0.0241T-0.0199A_0$, and square root model, $\sqrt{k}=0.02669$ (T-3.5689), were developed to express the combination effects of temperature and initial cell number, The relative coefficient of experimental k and predicted k of polynomial model was 0.87 from response surface model. The relative coefficient of experimental k and predicted k of square root model was 0.88. From above results, we found that the growth of putrefactive bacteria was mainly affected by temperature and the square root model was more credible than the polynomial model for the prediction of the growth of putrefactive bacteria.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.15 no.3
• /
• pp.113-120
• /
• 2007

Anaerobic batch tests were performed to evaluate the characteristics of methane production from piggery manure such as the ultimate methane yield (UMY), the kinetic constant and the maximum methane production rate. The kinetic behavior of anaerobic degradation of piggery manure was assumed as a first order reaction. The UMY, the first order kinetic constant and the maximum methane production rate were 0.27~0.44L $CH_4/gVS$, $0.161{\sim}0.280d^{-1}$ and 0.043~0.120L $CH_4/d$, respectively. Reactor of piggery manure as the self-seed source of anaerobic digestion resulted in longer acclimation time than reactors seeded with anaerobic digested sludge (ADS). But there was no little difference in the UMY between the two seed materials. The anaerobic digestion can be effective for the treatment of piggery manure containing high concentration of solids, the two-stage anaerobic digestion is, however, thought to be more effective than the traditional single one.

• Journal of the Korean Chemical Society
• /
• v.30 no.3
• /
• pp.301-306
• /
• 1986

The rate constants for the solvolysis reactions of p-methoxybenzylchloride in ethanol-water mixtures were determined at 2$^{\circ}$ and 10$^{\circ}C$ up to 1600bar. Rates of reaction were increased with increasing temperature and pressure, and decreased with increasing solvent composition of ethanol mole fraction. From the rate constants, the values of the activation parameters (${{\Delta}V_o}^{\neq},\;{\Delta}{\beta}^{\neq},\;{\Delta}H^{\neq},\;and\;{\Delta}S^{\neq}$) were evaluated. The values of ${{\Delta}V_o}^{\neq}$ and ${\Delta}{\beta}^{\neq}$ exhibit the extremum behavior at about 0.30 mole fraction of ethanol. This behavior is discussed in terms of solvent structure variation. From these results, it could be postulated that the reaction proceeds through $S_N1$ mechanism.

• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.11
• /
• pp.1046-1053
• /
• 2010

The objective of this study was to investigate the pyrolytic reaction characteristics of a mixed fuel of municipal solid wastes and low-grade anthracite. The reaction variables are pyrolysis condition of mixing ratio, reaction temperature, temperature increase rate. As a result, the optimum mixing ratio was 20 wt.% low-grade anthracite in MSW, which maintains for the low heating value over 3,500 kcal/kg on pyrolysis. The most high reaction velocity constant was shown at $700^{\circ}C$. Also, under the all experimental condition, the reaction velocity constant increased linearly as temperature rate increase, but pyrolysis has to be considered electric power cost and yield of char at lower temperature rate.

• Journal of the Korean Chemical Society
• /
• v.32 no.6
• /
• pp.528-535
• /
• 1988

The rates of oxygen ring formation of $[Mo_2O_3(Ox)_2(OxH)_2(NCS)_2]$ have been investigated spectrophotometric method in binary aqueous mixtures. Temperature was $20^{\circ}C$ to $40^{\circ}C$ and pressure was varied up to 1500 bar. The observed rate constants are increased by hydrogen ion and decreased by thiocyanate. The more increasing of co-solvents dielectric constant, the more stable intermediate is formed. The observed rate constant is given by, $k_{obs}^{-1} = k^{-1} (1 + K^{-1}[H_2O]^{-1}) All activation parameters are positive values. The oxygen ring formation of [Mo_2O_3(Ox)_2(OxH)_2(NCS)_2]$ is believed to be a interchange-dissociative mechanism..

• The Journal of Engineering Geology
• /
• v.23 no.4
• /
• pp.503-510
• /
• 2013

Shear wave velocity is widely used as an parameter for investigating subsurface characteristics and for obtaining the design parameters based on theoretical equations. This study seeks to estimate the coefficient of shear wave velocity in Busan clay via laboratory tests. Eight specimens were extracted at depths of 10, 12, 15, 20, 22, 25, 30, and 31 m. The specimens were subjected to the consolidation test to determine the relationship between effective stress and shear wave velocity. The relationship shows a non-linear trend and is similar to the results of a previous study. The coefficient shows constant coverage and a relationship between ${\alpha}$ and ${\beta}$ is suggested. The results demonstrate that this coefficient could be used as a reference value to determine engineering parameters based on the shear wave velocity.

• Korean Journal of Optics and Photonics
• /
• v.30 no.4
• /
• pp.133-141
• /
• 2019

Revision of the International System of Units (SI) in terms of fundamental constants was achieved by the 26th General Conference on Weights and Measures (CGPM) in November 2018. Four base units (kilogram, ampere, kelvin, and mole) of SI were redefined by fixing the values of the Planck constant h, elementary charge e, Boltzmann constant k, and Avogadro constant $N_A$ respectively. In this paper the scientific principle for redefining the kilogram from the Planck constant with the Kibble balance is explained as an example. The revised SI takes effect on May 20, 2019.