• Electrical & Electronic Materials
• /
• v.4 no.4
• /
• pp.344-353
• /
• 1991

무정형 SiC 박막을 수평형 CVD반응기로부터 SiH$_{4}$ 및 H$_{2}$를 반응기체로 하여 실리콘 웨이퍼위에 증착시켜 제조하였다. 박막 성장 속도는 상압에서 650.deg.C와 850.deg.C범위에서 측정되었다. 반응기체의 유량은 1000sccm으로 고정하였으며 SiH$_{4}$와 CH$_{4}$의 유량을 변화시켰다. 증착 반응속도식으로 표면 반응이 율속단계인 Eley-Rideal 모델과 SiH$_{4}$와 CH$_{4}$의 종도에 m차로 비례하는 두가지 속도식을 가정하였다. 증착시간에 따른 SiC 박막두께의 측정으로부터 얻은 증착 반응 속도로부터 회귀 분석법에 의하여 두가지 반응속도식의 반응속도 상수를 구하였다. 얻어진 반응속도식에 의해서 계산된 값과 실험치를 비교한 결과 0.15차의 반응속도식이 Eley-Rideal반응기구보다 약산 더 잘 맞음을 알 수 있으나 두 모델 다 약간씩 실험결과와 차이가 나고 있다. 이것은 본 실험의 증착 조건의 율속단계가 확산 단계와 표면 반응 단계의 전이영역 즉 본 실험의 증착조건에서 확산속도와 표면 반응속도가 비슷하기 때문으로 생각된다. 또한 Eley-Rideal 반응기구에서 부터 얻어진 SiH$_{4}$ 및 CH$_{4}$의 흡착평형상수 $K_{s}$ 와 $K_{c}$ 값을 비교하면 1000K이하에서는 $K_{s}$ 가 $K_{c}$ 보다 큰 값을 가지는데 이것은 Gibbs 자유에너지 최소화 방법에서 구한 결과와 일치하였다.

• Resources Recycling
• /
• v.12 no.4
• /
• pp.30-37
• /
• 2003

A kinetics study on the dissolution reaction of zinc-ferrite has been made with aqueous sulfuric acid in various temperature and concentration. Fraction reacted(R) and apparent rate constant(K) increased with increasing temperature and concentration of sulfuric acid solution. The rate of dissolution is shown by $1-(1-K)^{1/3}=Kt$ for the initial stage of the reaction in aqueous sulfuric acid, where K is apparent rate constant, R is fraction reacted and t is reaction time, respectively. Activation energy associated with reaction was determined to be 16.3 kcal/mole. The dissolution of zinc-ferrite in sulfuric acid solution is dissolved by sto-ichiometric composition, but Fe and Zn did not dissolved, respectively.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.1477-1480
• /
• 2015

본 논문은 TDR(Time Domain Reflectometry)을 이용하여, 비유전율내에서 PD(Partial Discharge) 발생 시 부분방전 위치를 추적할 수 있는 한분야의 방법으로 비율전율간의 이동속도를 적용하여 PD위치를 쉽게 겁근할 수 있는 방법이다. 기존에는 절연유와 SF6 가스의 연결부에서 부분방전 발생 시 30cm/ns의 이동속도를 이용하여 위치를 추적함으로써 약 31% 오차가 발생하였다. 절연유내에서의 이동속도를 20cm/ns의 상수를 적용하여 현장에 적용결과 PD위치의 오차를 저감할 수 있었으며, PD발생 부분을 절연유와 SF6 가스구역으로 구분을 할 수가 있었으며, 이를 통하여 점검예산을 확보할 수 있는 계기가 되었다. 비유전율 상수를 이용한 이동속도를 산출하여 PD위치를 추적하는 방법을 활용하면, 기존의 PD발생위치 추적을 보다 용이하게 접근할 수 있는 방법이라 생각한다.

• Korean Journal of Food Science and Technology
• /
• v.33 no.1
• /
• pp.66-71
• /
• 2001

Kinetic parameters for the texture degradation of three varieties of sweet potato during heating were determined using two alternative methods, the biphasic model and the fractional conversion method. The texture degradation of sweet potatoes during heating could be expressed by two simultaneous first order reactions using the biphasic method, whose activation energies were ranged $71.0{\sim}75.1\;kJ/mol\;and\;48.4{\sim}59.6\;kJ/mol$ for the initial fast texture degradation reaction and the slow texture degradation reaction at a prolonged heating period, respectively. However, the whole texture degradation phenomena of sweet potatoes during heating could also be explained by a single first order reaction using the fractional conversion method. The activation energies were $67.5{\sim}75.3\;kJ/mol$, which were comparable with those of the first phase reaction for the texture degradation determined by the biphasic model. A kinetic compensation effect shown between the kinetic parameters determined by both methods indicates that both methods can be conveniently used to determine kinetic parameters for the texture degradation of sweet potatoes by heating.

• Journal of the Korean Chemical Society
• /
• v.31 no.5
• /
• pp.413-418
• /
• 1987

Rates of the reaction for p-nitro benzyl chloride, benzyl chloride and p-methyl benzyl chloride with pyridine in methanol solvent have been measured by an electric conductivity method at 40$^{\circ}$C and 50$^{\circ}$C under various pressures (1∼2000bar). Pseudo first-order rate constants and second-order rate constants were determined. Rates of these reactions were increased in the order p-NO$_2$ < p-H < p-CH$_3$ and increased with temperature, pressure and concentration of pyridine. From those rate constants, the activation parameters were evaluated. The activation volume and the activation compressibility coefficient are both negative values, but the activation enthalpy is positive and the activation entropy is large negative value. From the evaluation of the ground state and transition state which was resulted from substituents and pressure, it was found that this reaction proceeds through S$_N$2 reaction, and S$_N$2 fashion is slightly disappeared as pressure increases.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.7 no.6
• /
• pp.517-523
• /
• 2002

A sensorless control of a PM synchronous motor with the compensation of the motor parameter variation is presented. The rotor position is estimated by using the d-axis and q-axis current errors between the real system and motor model of the position estimator. The stator resistance is measured at low speeds when the motor changes its rotating direction and the variation of the stator resistance and back emf constant caused by the temperature variation is compensated. The gains in the position estimator are also adapted according to the motor speeds.

• Applied Chemistry for Engineering
• /
• v.10 no.4
• /
• pp.548-556
• /
• 1999

The thermal degradation of polyethylene has been studied using a nonisothermal thermogravimetric technique under a nitrogen atmosphere condition at several heating rates from 10 to $50^{\circ}C/min$. To obtain information on the kinetic parameters, the dynamic thermogravimetric analysis curve and its derivative have been analyzed by a variety of analytical methods such as Kissinger, Freeman-Carroll, Flynn-Wall, Coats-Redfern, Chatterjee-Conrad, Friedman, Horowitz-Metzger, Ozawa and Denq methods. The comparative works for the kinetic results obtained from various methods should be performed to determine the kinetic parameters, because three are tremendous differences in the calculated kinetic parameters depending upon the mathematical method taken in the analysis. From this work, it was found that the apparent activation energy of HDPE was larger than those of LDPE and LLDPE.

• Journal of the Korean Chemical Society
• /
• v.22 no.1
• /
• pp.30-36
• /
• 1978

The kinetics of hydrolysis of ${\alpha}$-nitrobenzaldehydephenylhydrazone derivatives (p-$NO_2$, m-$NO_2$, p-Cl, p-$CH_3$) have been investigated by UV spectrometry in 25% dioxane-water at $25^{\circ}C$ and a rate equation which can be applied over wide pH range was obtained. From the rate equation and the effect of solvent, substituent and pKa on the rate equation, the following reaction mechanisms were proposed. Below pH 3.0 the hydrolysis of ${\alpha}$-nitrobenzaldehydephenylhydrazone proceeds by $S_N1$ mechanism, while above pH 4.0 the hydrolysis proceeds through 1,3-dipole ion mechanism. In the range of pH from 3.0 to 4.0 these two reactions occur competitively.

• Journal of the Korean Chemical Society
• /
• v.22 no.5
• /
• pp.281-288
• /
• 1978

Pseudo-first order rate constants $k_{obs}$ were determined for the reactions of naphthalenesulfonyl chlorides (1-NSC and 2-NSC) and anilines. The second order rate constant $k_2$ and third order catalytic $k_3$ were then determined from $k_{obs}$. For 1-NSC peri-hydrogen effect was observed. The large Brønsted ${\beta}$ and large negative slopes ${\rho}$ for the Hammett plots were obtained. These results with the unsually low values of activation parameters were consistent with the $S_AN$-elimination mechanism, but these can be equally well interpreted with the associative $S_N2$mechanism.

• Journal of the Korean Chemical Society
• /
• v.34 no.4
• /
• pp.319-324
• /
• 1990

Kinetic of substitution of dibenzoylmethanate (dbm) for one acetylacetonate (acac) in VO (acac)$_2$ have been studied in various solvents by spectrophotometry. Under the condition [VO (acac)$_2$] 》[Hdbm], the rate law for the substitution reaction is expressed as, rate = k$_2$K[VO(acac)$_2$] [Hdbm] / (1 ＋ K[VO(acac)$_2$]) where K = [VO (acac)$_2$dbmH] / [VO(acac)$_2$][Hdbm] and the rate constant k$_2$ corresponds to that of proton transfer from coordinated Hdbm to leaving acac- in VO(acac)$_2$dbmH.