• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2000.11a
• /
• pp.23-23
• /
• 2000

대표적인 잠수함 발사 유도탄의 수중에서의 발사 개념에 대한 기술 동향을 분석하였다. 세계 각 국의 수중 발사 유도탄 중 발사 형태가 특히 다른 Tomahawk, Sub Hapoon, Exocet SM39 유도탄에 대하여 그 발사 방법에 따른 기술 동향과 장단점을 비교 분석하였다. 대표적인 서방 세계 수중 발사 유도탄인 Tomahawk는 여러 가지 다른 형태가 있지만 잠수함 발사는 Wet Capsule에 의해 보호되며 어뢰 발사관을 이용하여 압축수에 의해 수중으로 배출되는데 잠수함과의 안전거리에서 견일줄이 유도탄 진행에 따라 장력을 발생 부스터를 점화시킨다. 이 부스터에 의해 수면까지 부상하며 부스터에 설치되어 있는 수중궤적 제어용 Jet-Tab이 수중운동을 제어한다. 수면에서 부스터의 추진력에 의해 대기로 진입하는데 일정속도 이상으로 가속된 후 부스터를 분리시키며 Turbo 엔진이 점화되어 계속 비행하게 된다.(중략)

• Proceedings of the Korea Information Processing Society Conference
• /
• 2004.05a
• /
• pp.153-156
• /
• 2004

이 연구에서는 동작 포착 데이터에서 최적의 동작을 얻기 위한 비용과 시간을 줄이고, 캐릭터의 체형 크기에 무관하게 복합 지형에서 적응적인 이동 동작을 빠르고 효율적으로 생성하는 방법을 제안한다. 즉 캐릭터의 신장이나 걷는 속도, 걸음폭 등의 매개변수들을 사용하여 평지면, 경사면, 계단면 그리고 굴곡면 등 다양한 지형에서의 달리기 동작을 생성하며 역운동학(Inverse Kinematics) 개념을 적용하여 관절들의 위치나 각도를 산출하고 관절의 이동 궤적을 계산하기 위해 큐빅 스플라인 곡선을 활용한다.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.3
• /
• pp.403-411
• /
• 2015

In this paper, we propose a design method for the position and speed controller, current control of a Brushless Direct Current(BLDC) motor using back-stepping design techniques. Further, to stabilize the whole system, and proposes a method for setting the appropriate gain control to improve the tracking performance. By applying the proposed controller to 120W BLDC motors were tested for the ability to follow the position, velocity and current reference. Since the simulation results of the steady state error is within 1%, we were able to show the usefulness of the tracking performance of the proposed controller.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.16 no.8
• /
• pp.719-731
• /
• 1991

This paper introduces a relatively simple computer simulation method for analyzing trajectory of electron beam in cylindrical electrode of the CRT, which outputs the cutoff voltag, beam current, spot size and plots out the trajectory, rom the input data on physical construction and applied voltages of electron gun. In order to improve computing speed in obtaining potential distibution, the authors have ivided the space into seveal setos and allocated different mesh sizes epending on the acuracy required to each sector and applied the finite difference method in calculation. The plot of trajectoy obtained from the simulation provided useful insight into the focusing mechanism of the CRT. The computed and measured result including beam curent. spot sizs and cutoff voltages for several model guns have ageed within eperimental error. The simulation program enables the designer to compare the effects of varied electrode shpe without the epense of building an actual gun and may be appli in esigning and implementing the electron gun assemply.

• Journal of Navigation and Port Research
• /
• v.29 no.8 s.104
• /
• pp.747-753
• /
• 2005

In this paper, as an anti-sway control strategy of container cranes, we investigate a variable structure control in which the moving load follows a given trajectory, whereas both the trolley and hoist controllers achieve their positioning problems. It is crucial, in an automated container terminal, that collisions should be avoided during the transference of containers from one place to another. It is also necessary, in the case of a quay crane, to select suitable loading and unloading trajectories of containers, so that possible collisions with surrounding obstacles are avoided. After a brief introduction of the mathematical model, a robust control scheme (i.e., a second-order sliding mode control that guarantees a fast and precise transference and a suppression of the resulted swing) is presented. Despite model uncertainties and unmodeled actuators dynamics, the swing suppression from the given trajectory is obtained by constraining the system motion on suitable sliding surfaces, which include both the desired path and the swing angle. The proposed controller has been tested with a laboratory-size pilot crane. Experimental results are provided.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.37 no.6
• /
• pp.10-21
• /
• 2000

The Cellular Noninear Networks structure for Distance Transform(DT) and the robust optical flow detection algorithm based on the DT are proposed. For some applications of optical flows such as target tracking and camera ego-motion computation, correct optical flows at a few feature points are more useful than unreliable one at every pixel point. The proposed algorithm is for detecting the optical flows on the trajectories only of the feature points. The translation lengths and the directions of feature movements are detected on the trajectories of feature points on which Distance Transform Field is developed. The robustness caused from the use of the Distance Transform and the easiness of hardware implementation with local analog circuits are the properties of the proposed structure. To verify the performance of the proposed structure and the algorithm, simulation has been done about various images under different noisy environment.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.6
• /
• pp.51-58
• /
• 2006

The spray characteristics of liquid jet injected into subsonic cross-flow were investigated experimentally. Spray trajectories were captured using CCD camera. Droplet sizes were measured using PDPA and Image Express. The nozzle diameter was 0.5 mm, and its length-to-diameter ratios (L/D) ran$4.11{\times}10^6$ged from 1.0 to 6.0. Experimental results indicate that the breakup point is delayed by increasing gas momentum ratio and the penetration length is decreased by increasing Weber number. At low injection angle(${\theta}$ < $90^{\circ}$), Weber number is dominant parameter for trajectories, but at high injection angle(${\theta}$ > $90^{\circ}$), L/D is dominant parameter for trajectories rather than Weber number.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.8
• /
• pp.1998-2009
• /
• 1998

An effective algorithm for tracking rigid or non-rigid moving object(s) which segments local moving parts from image sequence in the presence of backgraound motion by camera movenment, predicts the direction of it, and tracks the object is proposed. It requires no camera calibration and no knowledge of the installed position of camera. In order to segment the moving object, feature points configuring the shape of moving object are firstly selected, feature flow field composed of motion vectors of the feature points is computed, and moving object(s) is (are) segmented by clustering the feature flow field in the multi-dimensional feature space. Also, we propose IRMAS, an efficient algorithm that finds the convex hull in order to cinstruct the shape of moving object(s) from clustered feature points. And, for the purpose of robjst tracking the objects whose movement characteristics bring about the abrupt change of moving trajectory, an improved order adaptive lattice structured linear predictor is used.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.14 no.1
• /
• pp.63-68
• /
• 2004

In this paper, we propose a method about the extraction of vehicle and tracking trajectory for moving vehicle tracking system in road. This system applied to the monitoring system of the traffic flow for ATMS(advanced traffic management system) of ITS(intelligent transport system). Also, this system can solve the problem of maintenance of loop sensor. And we detected vehicle using differential image analysis. Because of the road environment changes by real time. Therefore, the method to use background image is not suitable. And we used Kalman filter and innovation value and variable search area for vehicle tracking system. Previous method using fixed search area is sensitive to the moving trajectory and the speed of vehicle. Simulation results show that proposed method increases the possibility of traffic measurement more than fixed area traffic measurement system.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.22 no.2
• /
• pp.1-10
• /
• 2018

This study investigated the acoustic forcing effects on the liquid column breakup length and the trajectory of liquid jets in crossflows. Cold-flow tests with a single hole circular nozzle injector were carried out by changing the injection pressure and acoustic forcing amplitude. Additionally, spray images were obtained at 12 phase angles to investigate the influence of the phage angle. The results revealed that the liquid column breakup lengths generally decreased under the acoustic forcing conditions, in comparison to those under the non-acoustic forcing conditions. However, they were not affected by the variation in the phase angles. On the contrary, it was found that the acoustic forcing hardly influenced the liquid column trajectories.