• Bulletin of the Society of Naval Architects of Korea
• /
• v.26 no.3
• /
• pp.1-8
• /
• 1989

The flow characteristics of a circulating water channel which is appropriate for a flow measurement and visualization in the laboratory has been investigated by using a Laser Doppler Anemometer. In order to get a stable and uniform distribution of mean velocity at the test section, the surface flow accelerator is designed and used. The experimental results that the turbulent structure should be considered with the mean velocity for obtaining the reasonable uniformity at the test section.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.24 no.9
• /
• pp.118-123
• /
• 2010

The selection of flux level in the maximum torque control of stator flux-oriented induction motor drives in the field weakening region is dependent on stator resistance and inductances. This paper presents parameter detuning effects of stator flux-oriented control drives in the field weakening region. The detuning effects of stator resistance and rotor leakage inductance are analyzed. The decrease of torque and the flux control lost by the detuning of inductance are shown in the simulation results.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.10 no.2
• /
• pp.52-60
• /
• 2011

Korea is the best country for ship-building. But nowadays, the speedboat and yacht are not mostly developed yet. For the sleek lines of ship, more innovative transmission system should be obtained in the ship industry. In general, marine transmissions often use the straight shafts and the helical gears. So it makes problem that engine-room requires large space. In this case, conical gear is the best solution for this. Until now, technology of conical gear is not generalized, but it will be increased more through many applications. So, in order to get conical gear design technology by ourselves, this thesis is conducted. This paper was written to gain useful information of marine gearbox design applied conical gear through the measurement of backlash, computer analysis and tooth contact test of helical conical involute gear pairs.

• Proceedings of the Korean Information Science Society Conference
• /
• 2003.10b
• /
• pp.700-702
• /
• 2003

휴대폰 및 PDA 산업의 급속한 발전에 더불어 2D환경에서 제작돈 많은 컨텐츠들이 서비스 되고 있으며 일부 2D기술을 통해 응용된 2.5D 수준의 다양한 기법을 통해 컨텐츠의 3D환경을 구현하는 방법이 사용되고 있다. 현재 모바일 기기의 기술적 한계에도 불구하고 모바일 컨텐츠 개발 업체 및 3D가속기 제작 업체에서 모바일용 3D API와 가속기에 대한 연구 및 개발이 계속되고 있으며 일부 일본과 유럽지역에서는 모바일용 3D엔진이 개발되어 출시되고 있다. 본 논문에서는 하드웨어적 성능의 제약 때문에 개발에 어려움을 겪고 있는 모바일 3D 엔진 기술의 동향에 대해 분석하고 현재 개발되었거나 개발 중인 모바일 3D엔진 API 및 하드웨어 가속기등의 특징과 하드웨어상의 제한에 따른 기술 개발의 한계 및 문제점을 분석하여 모바일 엔진 개발에 대한 해결방안을 제시하겠다.

• Journal of the Korean Society of Combustion
• /
• v.19 no.1
• /
• pp.1-10
• /
• 2014

An analytical study on performance evaluation of superdetonative mode ram accelerator was conducted for understanding the experimental result. The quasi-one dimensional continuum, momentum, energy equations were solved under the assumption of inviscid flow. It would be noticeable that experimental result could be analytically simulated with the assumptions of inlet shockwave, temperature dependent specific heat, and additional aluminum combustion due to ablation of aluminum projectile in superdetonative operation mode. The acceleration of ram accelerator was comparable to experimental result with the consideration of the additional aluminum combustion energy by ablation of projectile. As result, the experimental result with the aluminum projectile could be affected by heat of aluminum.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.24 no.1
• /
• pp.39-46
• /
• 2016

This paper reviews design validity before manufacturing HCVT prototype through simulation. The component part is being devided, modeled and checked if it works well to an designer's original intent about some active modes. Also, the dynamic characteristic is examined how it changes according to alteration of pressure, friction and leak rate. Finally, HCVT design plan is being confirmed if it could be materialized through those analysis.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.5
• /
• pp.58-63
• /
• 2008

A fast maximum efficiency control scheme of a stator flux-oriented control of an induction motor is proposed. Three inputs of given three magnetic fluxes are calculated. Then magnetic flux for minimum input is calculated by quadratic interpolation method and maximum efficiency control is fulfilled with the calculated magnetic flux for minimum input. Simulation results verify the effectiveness of the scheme.

• 기계와재료
• /
• v.21 no.2
• /
• pp.50-73
• /
• 2009

본 고는 중대형 풍력터빈의 핵심부품인 로터 블레이드, 대형베어링, 증속기, 발전기, 전략변환장치, 타워 등에 사용되는 주요재료에 대한 설명과 제조방법 및 평가 방법 등에 대해 다루어 졌다. 일반적으로 풍력터빈을 구성하는 소재는 금속소재와 비금속재료로 구분되며, 비금속재료는 대부분 복합재료로써 풍력 블레이드에 적용되고 있다. 현재 육상용 풍력터빈의 한계를 극복하기 위한 대안으로, 해상용 풍력터빈에 대한 관심이 집중되고 있으며, 이러한 극지 해상의 대형 시스템에 활용되고 있는 금속소재의 경우, 고강도, 저온인성, 내피로, 내식성 등이 우수한 강재를 요구하기에 이르렀다. 이에 따라, 여러 소재 측면의 요구를 충족하기 위한 소재설계의 비중이 점차 고조되고 있으며, 이러한 시점에 본 고를 통해 풍력터빈에 활용되고 있는 소재의 전반적인 내용과 관련 소재부품의 제조 및 평가 방법등의 이해를 돕고자 한다.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.3 s.96
• /
• pp.103-108
• /
• 1999

A problem in the grinding with a small diametric wheel is the decrease of wheel speed. In order to resolve this problem, an accelerating unit which increases the wheel speed is recommended. In this paper, the accelerating effect of an accelerating unit has been investigated through the side-cut grinding experiments performed with a vitrified bonded CBN wheel in a machining center(MC). The static stiffness, normal force, and machining error were measured in the experiments. As the accelerating unit is attached on the column of machining center, the static stiffness of tool system is largely decreased. But as the wheel speed increased by the accelerating unit, this problem is overcome and machining efficiency is improved. The lesser the quill stiffness was, the higher the accelerating effect became.

• Proceedings of the KSME Conference
• /
• 2001.06b
• /
• pp.110-115
• /
• 2001

The spherical CVT, intended to overcome some of the limitations of existing CVT designs, is marked by its simple kinematic design, improved efficiency of the shift actuator, and IVT characteristics, i.e., the ability of smooth transition between the forward, neutral, and reverse states without the need for any brakes or clutches. And it has been promised much possibility of energy savings and various applications for small power capacity machinery. Due to the nonlinearity of the spherical CVT shifting dynamics, however the original open-loop system is inherently unstable. Hence a feedback controller is necessary to make the system stable and to achieve effective tracking performance. To do this, we designed a feedback controller that cancels nonlinearities and transforms the original nonlinear system dynamics into a stable and controllable linear one, based on the input-state linearization method.