• 한국방재학회:학술대회논문집
• /
• 2010.02a
• /
• pp.63.2-63.2
• /
• 2010

본 연구에서는 CADMAS-SURF를 이용하여 단일 부유식 방파제의 소파성능에 관한 수치해석을 수행하였다. 방파제는 단일 배치하였고, 소파성능을 평가하는 지표로써 투과계수를 중심으로 분석하였다. 수치해석 결과의 검증을 위하여 동일한 조건하에 수리모형실험을 수행하였다. 단일 부유식 방파제의 투과계수는 심해파 조건에서 효과적인 소파성능을 나타냈다.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.2 no.1
• /
• pp.40-48
• /
• 1999

Wave absorbing system is needed at various kinds of wave basins (wave flume, towing tank, square tank) for the model test related to the ocean engineering. In this paper, the performance of wave absorbing system with new concept is estimated throughout the experiments. Herein, the wave absorbing system is designed by punching plate with a given porosity which is installed horizontally and submerged near the water surface. As the incident wave generated by a wave maker advances above a punching plate, the strong jet flow is formed near a hole of punching plate. As a result, wave energy is dissipated into heat energy, Systematic model tests were conducted at KRISO to verify the performance of the wave absorber using a punching plate. It was found that the reflection coefficient of wave absorber is deeply dependent on both the porosity and the submerged depth of a punching plate. Inclined installation of a punching plate shows better performance than a horizontal one within a certain inclined angle.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2010.05a
• /
• pp.243-247
• /
• 2010

본 연구에서는 단일 부유식방파제의 소파성능을 알아보기 위해 CADMAS-SURF를 이용한 수치모형실험을 실시하였다. 부유식방파제는 단일 직사각형으로 구성하여 동일 형상의 수중방파제가 배치된 경우와 부유식방파제와 수중방파제가 동시에 배치된 경우의 소파성능을 비교하였다. 소파 성능을 평가하는 지표로써 투과계수 및 반사계수를 산정하여 이를 파형경사에 대하여 검토하였다.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.9 no.3
• /
• pp.141-147
• /
• 2006

A newly designed floating breakwater made of Polyethylene with considering the introduction of new material for being harmony with environment and stability of the floater is developed for a marine ranching. In this study, the new concept in which incident wave dissipates its energy due to the vortex shedding by passing through the pipes and sheets is selected for wave breaking mechanism. Model experiment in order to te st its capability is performed for the regular and irregular waves in ocean engineering basin. Good capability to break the incident wave within the 6 seconds of period and 1 m of height is shown. Breaking efficiency for long period wave is not so good in regular and irregular wave. The results of this study will contribute to the design and construction of the floating breakwater.

• Journal of the Society of Naval Architects of Korea
• /
• v.38 no.1
• /
• pp.37-42
• /
• 2001

This paper proposes a new wave absorber made of flexible net structures. The motivation of this research is that the wave absorbers which already invented are not effective in small wave flume. To test the efficiency of the proposed water absorber, experiments were done for various wave length, the length of the wave absorber, and the areas of the wave absorber. The proposed new wave absorber demonstrated its efficiency when used in small-length wave flume.

• Journal of Ocean Engineering and Technology
• /
• v.12 no.1
• /
• pp.128-134
• /
• 1998

This study is carried out the theoretical studies on wave transmission and motions in waves of twin hull type floating breakwaters with the vertical and horizontal plate. The method of calculation is based on the three dimensional singularity distribution method. The results show that wave transmission is affected by heave motion. Twin hull type is designed by the use of the theoretical method and good performance of the developed floating breakwater is confirmed for longer wave period.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.8 no.2
• /
• pp.67-73
• /
• 2005

The characteristics of the floating breakwater is briefly reviewed and their performance is numerically investigated. The numerical scheme is a boundary integral method for inviscid potential flows, and various two-dimensional floating breakwater modules are studied focusing on the transmission coefficient. The general characteristics of pontoons is studied as function of mooring line stiffness, mass moment inertia and draft. Trapezoidal-, hat- and table-shape cross-sections are also studied with varying shape-parameters. The efficiency varies with changes in each shape-parameter and for some cases satisfying tranquility can be expected with even longer waves.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.3 no.2
• /
• pp.41-48
• /
• 2000

An experimental study is made to improve the efficiency of floating breakwaters. Wave transmission coefficients highly depend on the drafts of the floating breakwaters but not on the mooting chain weights. Array of two breakwaters can improve the efficiency of the floating breakwaters. Proper draft combination of the fore and the aft bodies may improve the performance of the floating breakwaters lot various wave periods.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2013.06a
• /
• pp.118-119
• /
• 2013

마리나 시설 내 계류된 선박 및 레저장비를 악천 후 해상상태와 선박 운항에 의해 발생된 파로부터 장비 및 인명의 안전을 위한 파 제거 장치가 필요하다. 본 연구에서는 국내 각 지자체의 수요에 부응하고 시설 및 인명의 안전을 위한 소파 시스템개발을 목적으로 시제품 제작(설계, 해석, 수조시험 등 수행완료)하였다. 실해상 성능시험에서 항주파의 발생을 위해 시험선박 선정하였으며, 소파장치 전후의 파고계측 등을 위해 부가물을 계측하여 파고를 촬영 및 계측하였다. 개발된 소파장치의 실해상 시험임을 감안해 해상 주위의 조류, 풍속, 인근 해역에서 오는 파랑변형 등에 따른 파랑요소를 고려하여 시험하였다. 부소파제는 약 40~80% 의 에너지 감소율을 보였으며, 유의파고 조건에서 42%의 에너지 감소율을 보였다.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.12 no.4
• /
• pp.195-202
• /
• 2000

Recently, wave dissipating structures with porosity are widely used to improve habor tranquility and to reduce the wave overtopping rate. In this study, hydraulic model tests were performed to examine hydraulic efficiency of slit caissons, igloo blocks, and hollow blocks. The model tests showed that slit caissons were the most effective in dissipating wave energy under moderate wave conditions. Slit caissons and igloo blocks showed no significant difference in reducing wave overtopping rate. Hallow blocks are less effective in reducing wave overtopping rate than slit caissons and igloo blocks lU1der higher wave energy conditions.