• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.15 no.2 s.95
• /
• pp.225-231
• /
• 2005

This paper presents a design method for the structural-acoustic coupled radiator that can emit sound in the desired direction. A coupled system that has a finite space and a semi-infinite space separated by two flexible walls and an opening is considered. An objective function is selected to maximize radiation power on a main axis and minimize a side lobe level. To get initial values, prediction of a pressure distribution on field points and radiation pattern of the structural-acoustic coupling system is shown at a coupled-resonant frequency. Three different optimization methods are adapted to design the coupled radiator. Pressure and intensity distribution of the designed radiator is presented.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2013.10a
• /
• pp.738-743
• /
• 2013

Underwater radiated noise is the key in acoustic stealth performance of modern naval ships. The underwater radiated noise predicted by the hull vibration with radiation efficiency cannot give the information of radiation pattern which is essential to the analysis of detection possibility by enemy and to improve the operational performance of the naval ship. The radiation pattern of underwater radiated noise is able to be obtained with radiation efficiency and radiation direction coefficient. In this paper, a new method to extraction the radiation efficiency and radiation direction coefficient is suggested and proved with the simulation and experiment by using cylindrical shell of 70cm diameter in air.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.175-178
• /
• 2004

선박의 수중방사소음은 다양한 기계류나 추진기 혹은 선체와 유체간의 상호 작용으로 인하여 여러 형태의 특성신호로 나타나게 된다. 이는 선박의 운용조건, 장비 회전특성 및 내부구조에 따라 스펙트럼상에 상이한 주파수로 확인됨은 물론, 신호의 출현 형태에도 다양성을 보이고 있다. 일반적으로 선박소음은 속력 종속적인 추진 계통 성분과 비종속적인 보기류 신호로 구분되나 다수의 신호성분이 혼재되어 발생기원을 분류하는 것은 복잡한 과정을 거쳐야 한다. 본 연구에서는 이러한 점을 해결하기 위해 선박의 Tonal성 신호를 자동으로 탐지하고 분류하기 위해 규준화된 스펙트로그램 상에서 연속되는 신호에 가중치를 주어 지속성 신호여부를 판별한 후에 정해진 임계치를 초과하는 성분을 Tonal로 선정하였다. 선정된 Tonal에 대해 주파수선의 대역특성 및 시간 변동성에 대한 패턴인식 방법을 적용하여 Tonal의 발생기원이 속력 종속/비종속적인지를 자동으로 판별하는 알고리즘의 유용성에 대한 결과를 기술하였다.

• Proceedings of the KIEE Conference
• /
• 1997.11a
• /
• pp.527-530
• /
• 1997

최근 환경에 대한 각국의 관심이 높아지면서 자동차의 배기가스 및 소음에 관한 규제 차들이 날로 높아 가고 있는 실정이다. 이에 대한 해결책의 하나로 전기 자동차에 관한 관심이 고조되고 있으며, 특히 기계적 에너지와 전기적 에너지를 동시에 제어함으로써 외부의 별도 전원 공급이 필요 없이 구동이 가능한 병렬 복합형 전기자동차가 많은 연구의 대상이 되고 있다. 병렬 복합형 전기자동차의 전동기는 저속에서 구동 회전력을 보조하여 배기가스와 소음을 감소시키며, 고속에서는 내연 기관으로부터 에너지를 공급받아 배터리를 충전한다. 본 논문에서는 인공지능을 이용하여 다양한 주행 조건, 운행 패턴 등에 효과적으로 대응할 수 있으며 배기가스 및 소음을 감소시킬 수 있는 운행 제어 알고리즘을 제안하고 이를 주행시험을 통하여 그 타당성을 입증하였다.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.23 no.8
• /
• pp.707-716
• /
• 2013

Tire noise is divided into two parts. One is pattern noise the other one is road noise. Pattern noise primarily occurs in over 500 Hz frequency but road noise occurs mainly in low frequency. It is important to develop a technology to predict the pattern noise at the design stage. Prediction technology of pattern noise has been developed by using image processing. Shape of tire pattern is computed by using imaging signal processing. Its results are different with the measured one. Therefore, the prediction of actual measured pattern noise is valuable. In the signal processing theory is applied to calculate the impulse response for the measurement environment. This impulse response used for the prediction of pattern noise by convolving this impulse response by the results of image processing of tire pattern.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.11a
• /
• pp.735-741
• /
• 2003

A simplified view of array design and application process was introduced. Array design is critical to achieve a successful phased array measurements. A planar microphone array is designed to produce optimum performance and also to fit economic requirement in integrating data acquisition system. Certain performance characteristics are of primary concern when designing arrays. These characteristics include array resolution, spatial aliasing and array sidelobe suppression. Every array has its directional pattern that shows such characteristics. Assuming that a monopole source is located in center, beam-patterns have been simulated varying measurement conditions such as number of sensors. array aperture size, distance between array and source, frequency of interest and so on. Sensor correction was conducted on very channel using magnitudes and phased of FRF with respect to a reference microphone channel. Then with a spiral type array, measurements have been made with two point sources of same frequency in order to investigate array resolving abilities. It is observed that higher frequency source achieves better resolution than lower one does.

• Journal of the Korean Society for Railway
• /
• v.14 no.6
• /
• pp.477-483
• /
• 2011

In this paper, noise source localization of the Korean high speed train was conducted by using delay and sum beam-forming method of a microphone array. At first, the microphone array having irregular configuration was designed and the resolution of which was analyzed from parameters such as 3-dB bandwidth and maximum side-lobe level. After the demonstration, the microphone array was applied on the high speed train and noise localization of the high speed train driving at 300 km/h was performed successfully.

• Journal of the Korean Society of Mechanical Technology
• /
• v.13 no.4
• /
• pp.77-84
• /
• 2011

Tire manufactures have dealt with noise problem by varying the pitch of the tread. The various formulas for the variations are generally determined differently, however. Often these variations are based on a combination of trial and error, intuition, and economics. Some manufactures have models and analogs to test tread patterns and their variations. These efforts, however practical, do not determine the best variation beforehand or guarantee the best results. For this reason it was felt that a general mathematical approach for determining the best variation was needed. Moreover, the method should be completely general, easy to use, and sufficiently accurate. This paper discusses a mathematical method called Mechanical Frequency Modulation(MFM) which meets the above requirements. Thus, MFM pertains to computing an irregular time sequence of events so that the resulting excitation spectrum is shaped to a preferred form. The first part of this paper treats the theoretical basis for computing an optimum variation ; the second part discusses experimental results and simulation program which corroborate the theory.

• Proceedings of the KSEE Conference
• /
• 2004.08a
• /
• pp.49-75
• /
• 2004

소음진동 규제법의 강화, 각종 건설민원 발생 및 안전강화 관리 차원에서 현재 국내 터파기 현장 및 각종 토공사에서 종래 시행되어지던 발파공법만으로 시행하는 것은 곤란하다. 건설교통부 설계 지침에서도 진동 규제치의 차이를 두어 파쇄와 발파와의 차이를 확연히 구분하는 실정이다. 기존에 발파는 그 경험이 많아 효과적인 방법 등이 널리 알려져 있지만 파쇄의 경우는 그 시공사례가 많지 않아 그 연구의 필요성이 대두되고 있다. 본 연구는 건교부에서 제시한 암파쇄굴착공법에 사용되어지는 미진동 파쇄기에 대한 연구로써 연암, 보통암, 경암지역에서의 전색제, 적정 패턴, 진동 특성 등을 분석하는데 그 목적이 있다. 시험은 크게 1, 2 타입으로 구분하여 실시하였으며 1타입의 경우는 천공장이 1.5m(180g 장약)이고, 2타입의 경우는 2.5m(360g)이다. 두 패턴을 기본으로 저항선, 공간격을 달리하여 시험을 진행하면서 그에 따르는 진동 및 파쇄정도의 차이를 관찰할 수 있었으며 암석 강도별 예상 진동식을 제안하였다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.611-614
• /
• 2005

It is well known that tire tread pattern has much influence on the tire pattern noise. The paper describes the method of pattern noise reduction by using the pitch sequence, both on the smooth asphalt roads and on the trenched concrete roads. The noise of tire is classified as either airborne or structure borne noise. Pattern noise through the airborne is considered as a major noise source at high speeds. As block impacting and air pumping by tread patterns are major noise source, tire pattern noise can be greatly influenced by optimal pitch sequence. The goal of this paper is to provide tire engineers with pitch sequence to reduce pattern noise effectively.