• Title/Summary/Keyword: 소음의 종류

Search Result 187, Processing Time 0.03 seconds

Optimization for Configuration and Material Cost of Helical Pile Using Harmony Search Algorithm (하모니서치 알고리즘을 이용한 헬리컬 파일의 형상 및 재료비 최적 설계기법에 대한 연구)

  • Na, Kyunguk;Lee, Dongseop;Lee, Hyungi;Choi, Hangseok
    • KSCE Journal of Civil and Environmental Engineering Research
    • /
    • v.35 no.2
    • /
    • pp.377-386
    • /
    • 2015
  • The helical pile is a manufactured steel pile consisting of one or more helix-shaped bearing plates affixed to a central shaft. This pile is installed by rotating the shaft into the ground to support structural loads. Advantages of the helical pile are no need for boring or grout process, and ability to install a pile foundation with relatively light devices. In this study, an optimized design method for helical piles is proposed to minimize the material cost with consideration of the load bearing capacity obtained by the cylindrical shear method. The harmony search meta-heuristic algorithm was adopted for optimization process. The optimized design was verified by comparing with the 2009 International building code. It is noted that the optimization for the configuration of helical piles along with material cost proves to be an out-performed tool in designing helical pile foundation with economic feasibility.

Analysis of Acoustic Emission Signal Sensitivity to Variations in Thin-film Material Properties During CMP Process (CMP 공정중 박막 종류에 따른 AE 신호 분석)

  • Park, Sun Joon;Lee, Hyun Seop;Jeong, Hae Do
    • Transactions of the Korean Society of Mechanical Engineers A
    • /
    • v.38 no.8
    • /
    • pp.863-867
    • /
    • 2014
  • In this study, an acoustic emission (AE) sensor was used for measuring the abrasive and molecular-scale phenomena in chemical mechanical polishing (CMP). An AE sensor is a transducer that converts a mechanical wave into an electrical signal, and is capable of acquiring high-level frequencies from materials. Therefore, an AE sensor was installed in the CMP equipment and the signals were measured simultaneously during the polishing process. In this study, an AE monitoring system was developed for investigating the sensitivity of the AE signal to (a) the variations in the material properties of the pad, slurry, and wafer and (b) the change in conditions during the CMP process. This system was adapted to Oxide and Cu CMP processes. AE signal parameters including AE raw frequency, FFT, and amplitude were analyzed for understanding the abrasive and molecular-level phenomena in the CMP process. Finally, we verified that AE sensors with different bandwidths could function in complementary ways during CMP process monitoring.

Basic principle of BSR (Buzz, Squeak, Rattle) noise according to the generation mechanism (BSR(Buzz, Squeak, Rattle)이음 발생 메커니즘 기본 원리와 시험평가 방법)

  • Choi, Sung uk;Ahn, Sungcheul;Ih, Kang Duck
    • The Journal of the Acoustical Society of Korea
    • /
    • v.37 no.5
    • /
    • pp.309-316
    • /
    • 2018
  • Various studies have been conducted to improve the BSR (Buzz, Squeak, Rattle) noise generated irregularly while the vehicle is running. In vehicle, When an external force such as vibration or force flows into the contact surface, BSR noise is generated at the contact surfaces of nearby components. In this paper, BSR conceptually explain the kind of noise generation mechanisms and the basic principles of generation, which have been proven by observing and improving noise phenomena in automobiles over the last 10 years. Through this, it is expected that researchers who want to study BSR related improvement research not only in automobiles but also in other industries, It will be able to understand the BSR phenomenon and provide a framework for thinking out improvement ideas and to carry out further research.

Air Sampling For Volatile Organics Using an Adsorbent (흡착제를 이용한 휘발성 유기물 채취)

  • ;L.R.Berrafato
    • Journal of Environmental Science International
    • /
    • v.1 no.1
    • /
    • pp.41-46
    • /
    • 1992
  • To perform a long-term ambient sampling study at a residential site, an air sampler was constructed to collect 24-hour integrated air samples suitable for the volatile organic compounds (VOCs) analysis. It includes an esthetically acceptance due to proximity to homes, as fell as providing the required sampling specifications. The VOCs sampler accomodates four 5/8 "stainless steel(SS) traps packed with adsorbent(Tenax) and is capable of four flow rates in the range of 5 to 50 cc/min. Sintered metal filters(10 micrometer) were directly connected to the inlet of the trap adapters. Additional specifications include: 1) constructed of organically inert materials, 2) weatherproof, 3) battery operated, 4) collecting of VOCs at a breathing zone level, and 5) quiet operation with micro diaphragm pumps wrapped by the sponge. The pump/battery system was separated from the sampling shelter. Sound levels measured for this system were below permissible sound levels (NJDEP) at a residential site. The sampler has been successfully operated at both ground level in a residential area and on the roof of a one story elementary school.hool.

  • PDF

Analysis of the Multi-layered Soil on Monopile Foundation of Offshore Wind Turbine (해상 풍력 타워의 모노파일 기초에 대한 다층 지반 해석)

  • Kim, Nam-Hyeong;Go, Myeong-Jin
    • Journal of Navigation and Port Research
    • /
    • v.37 no.6
    • /
    • pp.655-662
    • /
    • 2013
  • Recently, by the problems owing to utilization of fossil fuel, various green energies receive attention. Wind, the impetus for the wind power generation as one of the green energies, is observed higher quality value in the offshore than onshore. Also, the development of offshore wind turbines is in the spotlight as alternative to solve the problems of onshore wind farm such as securing sites, noise, and electromagnetic waves, and to get efficient wind energy. Therefore, the many researches on offshore wind energy have been carried out. As wind towers are advanced to ocean, offshore wind towers have been enlarged. Thus, stability is required to endure wind force and wave force. In this study, the external forces act on the foundation in multi-layered are calculated by p-y relation.

Natural Hazard Research in Geography (지리학 측면에서의 자연재해연구)

  • 김욱중
    • Water for future
    • /
    • v.22 no.4
    • /
    • pp.415-415
    • /
    • 1989
  • 자연재해연구는 인간.자연환경 관계를 연구하는 학문이다. 금세기초 환경결정론, 환경가능주의, 그리고 인지에 의한 행동과학주의로 연구 Paradigm이 변화.발전되어 오며서 지리학에서도 이러한 이론적 방법론의 바탕위에 인간-자연환경 관계를 설명하려고 노력했다. 1920년대 초 Barrow가 인간생태학 개념을 발표, 1950, 1960년대 이에 영향받은 White, Kate와 Burton 같은 미국의 자연재해지리학자들은 미국에서 홍수재해문제를 인간적응, 특히 "인식"의 역할에 중점을 두어 재해지역에서 자원이용과 이의 관리문제를 연구하였다. 1970년대 들어오면서 재해의 양상, 적응방법등이 연구되고, 또한 적응의 여러 비교연구가 있었으며, 사회성과 관련 사회학적 연구 접근과 다양한 레벨의 케이스 Study 또한 이루어졌다. 오늘날의 자연재해연구는 일반재해연구로 발전하여 핵반응, 각종산업.교통재해, 화학물질 및 환경오염문제, 각종 소음공해, 폭발물 사고 등 참으로 여러 종류의 사회문제가 재해연구의 대상이 되었고, 근래에는 약물중독, 성폭행, 그리고 복잡한 현대사회에서 제기되는 정신질환까지 일종의 재해문제로 다루어 지리학내에서 연구되고 있다. 이와같이 연구의 많은 변환.발전과 함께 처음 Academic한 연구로 시작된 재해문제 연구가 이에 관심을 같는 여러분야 즉, 경제.사회, 심리학자, 토지이용개발자, 보험, 은행, 부동산업자 재해와 관련있는 민간단체, 정부기관, 정책실행기관등이 참여하는 공동연구가 활발히 행하여지고 있다. 최근에는 "세계 자연재해 감소 10개년 계획"이라는 Program을 미국이 주동이 되어 국제적인 기구로 만들어 관심있는 여러국가의 과학자, 재해연구가, Engineer, 정부관계자들이 참여 서로 정보와 지식의 교환, 세계의 개발.재개발에 대한 계획, 재해감소의 교육훈련등 다채로운 Project을 가지고 세계 자연재해 감소를 위하여 공동연구의 노력을 하려는 움직임이다. 세계의 권위있는 재해통계에 의하면 한국이 매년 자연재해로 인하여 100만명당 1,000명이 희생되는 나라로 방글라대시, 이란, 중남미와 페루, 과태말라, 동남아시아의 뉴기니와 나란히 중진개발도상국으로 몇안되는 나라의 하나로 들어있는 것을 볼 때 유감이 아닐수 없다. 우리나라는 하루빨리 이러한 자연재해로부터 아까운 생명과 재산을 잃어버리고 있는 고통과 문제를 해결하려는 민간.정부차원에서 관심을 기울이고 우선 기본적인 연구의 기틀을 마련하는 제도적 장치와 분위기가 아쉽다고 않을 수 없다.와 분위기가 아쉽다고 않을 수 없다.

  • PDF

Development of Forecasting Model for the Initial Sale of Apartment Using Data Mining: The Case of Unsold Apartment Complex in Wirye New Town (데이터 마이닝을 이용한 아파트 초기계약 예측모형 개발: 위례 신도시 미분양 아파트 단지를 사례로)

  • Kim, Ji Young;Lee, Sang-Kyeong
    • Journal of Digital Convergence
    • /
    • v.16 no.12
    • /
    • pp.217-229
    • /
    • 2018
  • This paper aims at applying the data mining such as decision tree, neural network, and logistic regression to an unsold apartment complex in Wirye new town and developing the model forecasting the result of initial sale contract by house unit. Raw data are divided into training data and test data. The order of predictability in training data is neural network, decision tree, and logistic regression. On the contrary, the results of test data show that logistic regression is the best model. This means that logistic regression has more data adaptability than neural network which is developed as the model optimized for training data. Determinants of initial sale are the location of floor, direction, the location of unit, the proximity of electricity and generator room, subscriber's residential region and the type of subscription. This suggests that using two models together is more effective in exploring determinants of initial sales. This paper contributes to the development of convergence field by expanding the scope of data mining.

Shooting sound analysis using convolutional neural networks and long short-term memory (합성곱 신경망과 장단기 메모리를 이용한 사격음 분석 기법)

  • Kang, Se Hyeok;Cho, Ji Woong
    • The Journal of the Acoustical Society of Korea
    • /
    • v.41 no.3
    • /
    • pp.312-318
    • /
    • 2022
  • This paper proposes a model which classifies the type of guns and information about sound source location using deep neural network. The proposed classification model is composed of convolutional neural networks (CNN) and long short-term memory (LSTM). For training and test the model, we use the Gunshot Audio Forensic Dataset generated by the project supported by the National Institute of Justice (NIJ). The acoustic signals are transformed to Mel-Spectrogram and they are provided as learning and test data for the proposed model. The model is compared with the control model consisting of convolutional neural networks only. The proposed model shows high accuracy more than 90 %.

Screening of Personalized Immunostimulatory Activities of Saengsik Materials and Products Using Human Primary Immune Cell (사람 면역세포를 활용한 생식 원료 및 제품의 체질 맞춤형 면역 활성 탐색)

  • Oh, Seong-Yoon;Chung, Mi Ja;Choi, Jae-Ho;Oh, Deog-Hwan
    • Journal of the Korean Society of Food Science and Nutrition
    • /
    • v.43 no.9
    • /
    • pp.1325-1333
    • /
    • 2014
  • Sasang constitutional medicine is a Korean traditional medicine in which individuals are classified into four constitutional types, Taeyangin, Taeumin, Soyangin, and Soeumin. To develop new functional Saengsik products, we investigated the immunostimulatory activities of raw materials of Saengsik (milled rice, barley, Job's tears, soybean, adzuki bean, millet, eggplants, radish, carrot, Lentinus edodes, Agaricus bisporus, and Auricularia auricula-judae) and Saengsik products (Mix 1~6) in primary immune cells (lymphocytes and macrophages) isolated from blood of Taeumin, Soyangin, and Soeumin types. Increased cell proliferation as well as NO and TNF-${\alpha}$ protein production by immune cells treated with extracts of materials of Saengsik and Saengsik products were measured as immunostimulatory parameters. We chose milled rice, adzuki bean, radish, and Lentinus edodes to study the immunostimulatory activity of Teaumin, barley, soybean, eggplants, and Agaricus bisporus to study the immunostimulatory activity of Soyangin, as well as Job's tears, adzuki bean, carrot, and Auricularia auricula-judae to study the immunostimulatory activity of Soeumin. The mixtures (Mix 1~6) were made with different kinds and ratios of Saengsik materials based on the immunostimulatory activities of Saengsik materials. The immunostimulatory activity of Taeumin was highest in Mix 2 (rice 60%, adzuki bean 20%, radish 10%, and Lentinus edodes 10%) extract-treated immune cells among all six mixtures. The immunostimulatory activity of Soyangin responded best to Mix 4 (barley 60%, soybean 20%, eggplants 10%, and Agaricus bisporus 10%) among the six extracts (Mix 1~6). The increased immunostimulatory activity of Mix 6 (Job's tears 60%, adzuki bean 20%, carrot 10%, and Auricularia auricula-judae 10%)-treated immune cells was higher than the other five extracts (Mix 1~5). Accordingly, Mix 2, Mix 4, and Mix 6 may be useful as mixtures for Saengsik products having personalized immunostimulatory activities.

A Study on Effects of Tuning Intake and Exhaust Systems upon Engine Performance in a Driving Gasoline Car (운행 가솔린자동차 엔진성능에 미치는 튜닝 흡기 및 배기 시스템의 효과에 관한 연구)

  • Bae, Myung-whan;Ku, Young Jin;Park, Hui-seong
    • Transactions of the Korean Society of Mechanical Engineers B
    • /
    • v.41 no.11
    • /
    • pp.775-784
    • /
    • 2017
  • The purpose of this study was to analyse the basic data of the engine tuning inspection by confirming the working possibility of effective engine tuning and identifying the characteristics of tuned engine that are no problem with the safety operation and environment in a driving gasoline car. The effects of tuned engine on the characteristics of air/fuel ratio and performance at a wide range of engine speeds were experimentally investigated by the actual driving car with a four-cycle, four-cylinder DOHC, turbo-intercooler, water-cooled gasoline engine operating under four types of non-tuning, and tuning 2-1, 2-2 and 2-3. The tuned parts of engine in a driving gasoline car include the intake manifold, intake pipe, air filter, exhaust manifold, exhaust pipe and silencer. In this experiment, the air-fuel ratio and torque of both non-tuned and tuned engines that one person took on board in the car with a five-speed automatic transmission were measured by the chassis dynamometer(Dynojet 224xLC). It was found that the maximum torque of tuned engine in a driving gasoline car was increased by 103.68% on average, while the maximum output was increased by 119.68% on average in comparison to the non-tuned engine.