• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.05a
• /
• pp.97-100
• /
• 2004

물질의 진동감쇠 특성을 평가하는 대표적인 시험법은 ISO 6721, ASTM E 756 등에서 찾아 볼 수 있다. 이들 규격에서는 비접촉 가진방법으로 전자석 시스템을 사용한다. 하지만 이와 같은 방법은 강판 단독으로의 시험은 간편하나 비자성체 물질이나 도료를 도포 할 경우, 별도의 금속판이 필요하다. 또한 그에 따른 금속판의 감쇠특성을 별도로 평가해야 되며, 접착제에 대한 영향도 고려해야 된다. 이에 대한 보완으로 음압가진 방법을 이용한 비접촉 가진을 강철과 플라스틱에 적용하였다. 실험결과, 강철과 플라스틱의 공진주파수에 따른 손실계수와 탄성계수는 전자석을 이용한 실험결과와 일치하였다.

• Journal of KSNVE
• /
• v.10 no.1
• /
• pp.64-73
• /
• 2000

We present finite element equations in the Laplace-domain for linear viscoelastic and viscoelstically damped structures governed by a constitutive equation involving factional order derivative opeartors. These equations yield a nonstandard eigenproblem consisted of frequency dependent stiffness matrix. To solve this nonstandard eigenproblem we suggest an eigenvalue iteration procedure in the Laplace-domain. Improved Zenor and GHM material function type constitutive equations in the Laplace-domain are also available for this procedure. From above equations, complex eigenvalues and complex eigenvectors are obtained. Using obtained eigenvalues and eigenvectors, time domain analysis is performed by means of mode superposition. Finally, finite element solutions of viscoelastic and viscoeleastically damped sandwich beam are presented as an example.

• Journal of KSNVE
• /
• v.16 no.4 s.82
• /
• pp.57-63
• /
• 2006

• Journal of KSNVE
• /
• v.16 no.6 s.84
• /
• pp.16-21
• /
• 2006

• Journal of KSNVE
• /
• v.16 no.6 s.84
• /
• pp.36-41
• /
• 2006

• Journal of KSNVE
• /
• v.16 no.5 s.83
• /
• pp.66-72
• /
• 2006

• Journal of Korean Society of Forest Science
• /
• v.78 no.1
• /
• pp.30-34
• /
• 1989

Effects on noise attenuation of the hedge species, Thuja orientalis L. and Euonymus japonicus Thunb., widely used as road side hedges, were analysed at the frequencies of 1,000, 2,000 and 3,150 Hz., respectively. The present experiments were carried out both in the field and in a Semianechoic Chamber. As increasing the distances from the noise source, attenuation rates of noise level were increased at high frequencies. But the attenuation rates of the noise level at low frequencies showed varied as the distances increased, and this trend appeared to be caused by the influence of ground waves. Generally, in this experiment, Thuja orientalis L., which is a coniferous species, showed more effective on the abilities of noise attenuation than that of Euonymus japonicus Thunb., which is a broad-leaved evergreen species.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.4
• /
• pp.489-496
• /
• 2019

This paper is a study on the evaluation of loss factor of damping treatment materials to reduce the noise and vibration for panels of railway vehicles and automobiles. In order to determine the modal parameters of damping materials, beam excitation tests were carried out using different type PVC coated aluminum and steel base beam specimens. The specimens were excited from 10 Hz to 1000 Hz frequency range using sinusoidal force, and transfer mobility data were measured by using an accelerometer. The loss factors were determined by using integrated program, based on theories of Half Power Method, Minimum Tangent Error Method, Minimum Angle Error Method and Phase Change Method, which enable to evaluate the parameters using modal circle fit and least squares error method. In the case of lower loss factor and data of linear characteristics, any method could be applied for evaluation of parameters, however the case of higher loss factor or data including non-linear characteristics, the minimum angle error method could reduce the loss factor evaluation. The obtained dynamic properties of the coating material could be used for application of Finite Element Method analyzing the noise control effects of complex structures such as carbody or under-floor boxes of rolling stock. The damping material will be very useful to control the structural noise, because the obtained modal loss factors of each mode show very good effect on over $2^{nd}$ mode frequency range.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.11a
• /
• pp.777-777
• /
• 2007

• Journal of KSNVE
• /
• v.3 no.1
• /
• pp.29-37
• /
• 1993

This study is concerned about the impact type damper for effectively restraining the high vibration amplitude in the resonance regions. The theoretical analysis is based on the assumption that the impacts occur twice per cycle at an equal time interval. Simple but reasonable approximations have been derived for the optimum collision clearance and maximum amplitude ratio. Using the impact dampers which is rigidly attached to the primary vibration system, we have experimented for mass ratios and restitution coefficients. The experimental results are in good agreement with theoretical results.