• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.11a
• /
• pp.880-885
• /
• 2007

Diesel engines have been widely used in ships and power plants because of its higher thermal efficiency, mobility and durability compared to other prime movers. Though these merits, diesel engine including main components are sometimes vibrated due to higher combustion pressure in cylinders. Especially torsional, axial and structural vibrations in propulsion shafting may be severely manifested by the malfunction of torsional and axial dampers and misfiring and unbalanced load in cylinder. The structural vibration of main body and turbocharger core hole are also occurred by the loosen top bracing and excess wear-out or failure of turbocharger's bearings. The marine diesel engine should be safely designed from these vibrations. This paper introduces experimental methods to develop the prototype of integrated vibration monitoring system for marine diesel engine.

• Proceedings of the Korea Contents Association Conference
• /
• 2014.11a
• /
• pp.75-76
• /
• 2014

본 연구는 국토 공간정보 기반으로 새로운 위성측량 기술과 USN 측정기술을 접목하고 구체적인 AGS 공법과 같은 그라우팅 기술의 적용으로, 방재를 필요로 하는 주요 수리시설물에 대한 정밀한 변위와 거동을 모니터링 할 수 있는 첨단기술의 개발 및 적용은 국가적으로 매우 중요한 과제이며 실용성이 높은 기술연구이다. 외부공간에서의 GNSS 위성측위 방식의 초정밀의 위치변위를 실시간으로 추적하고 그에 영향을 주는 환경인자인 온도, 습도, 조도, 이산화탄소, 질소, 함수비, 소음진동 등은 무선 USN에 의하여 실시간으로 동시에 수집하여 통합적으로 분석 적용하여 방재시설의 적절한 대응시기를 찾아낼 수 있을 것으로 판단되며, 특히 정밀한 변위 관측을 필요로 하는 안전진단 및 방재를 필요로 하는 시설물 안전관리 분야에서 다방면으로 크게 활용할 수 있는 방안을 모색하였다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.05a
• /
• pp.185-187
• /
• 2012

In this paper, the MR fluid damper to the application of the paramagnetic (paramagnetic) particles dispersed in the MR fluid inside the magnet current caused by the MR damper using the principles of the internal fluid delivery yield stress variation is characterized in Silky. In other words, the current strength of the MR fluid damper according to the internal friction coefficient varies phenomenon is to use. The MR fluid damper to control the MCU that you want to use Microchip's dsPIC chips, and current control in order to improve performance by using the PWM and UART communication to an external monitor to monitor the entire system was designed. In this study using MR fluid dampers and dsPIC chip dehydration process happens when a washing machine vibration and noise, vibration and noise reduction sikidorok washing machine protection systems are proposed.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.5
• /
• pp.555-561
• /
• 2012

In this paper, a method to control the noise and vibration of a standard gear transmitting mechanical power in the transmission insides, to things regarding a way to inspect the gear which was processed minutely. In an algorithm used to accurately measure a work gear, the measurements of the master gear are considered as the basis. The existing method considers one rotation of the standard gear and monitor gear, and that carried out mastering work in frequency ways. In this study, an algorithm to measure standard gear and monitor gear is proposed along with methods to calculate an error of the monitor gear and to significantly increase the precision of gear measurement. Further, the algorithm is fast and is expected to be capable of accurately measuring for mastering processing.

• Journal of Industrial Technology
• /
• v.27 no.B
• /
• pp.59-64
• /
• 2007

This study introduces an environmental noise evaluation procedure and results for a wind turbine (W/T) system. Test and evaluation are required by the international standard IEC 61400-11 in the aspect of environmental effect. Test and evaluation are performed on U-50 WT model which is first developed by the domestic W/T manufacturer. W/T test model is under operation in Daekwanryung wind test site. An integrated monitoring system in the test site is utilized for the evaluation. With the noise signal, meteorological data and W/T operational data are monitored in real time by the integrated monitoring system using LabVIEW. From the measured noise data, acoustic power level are estimated and compared with those of other similar size WT under the wind speeds required by international standard.

• Journal of Korea Society of Industrial Information Systems
• /
• v.21 no.6
• /
• pp.71-80
• /
• 2016

Along with the increase in the standard of living, the interest and awareness level of the public about environmental issues have also gradually increased. Recently, time spent on indoor activities have increased and the need for awareness and demand on methods in improving the quality of an indoor environment has been recognized. The purpose of this study is to sense the environment information through real-time monitoring of the room environment by using the IoT based technology and to maintain and improve the indoor environment to an appropriate level through the developed interlocking controller device. This provides an automatic control system in improving the indoor environment at home and other small areas like general offices in place of the traditional passive interior environmental improvement actions or large-scale facility control system. A status analysis with the relative reference values of the air quality and CO2, temperature and humidity and illumination and noise was applied through transmitting a control signal to automatic control module in accordance with the nine indoor environment standards set to improve the indoor environment.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.3 no.1
• /
• pp.83-95
• /
• 1999

Wavelet transform has localization for time or frequency. It is useful to analyze a nonstationary signal. Basic function on wavelet transform is generated dilating and translating the original wavelet(mother wavelet). In this paper, time-frequency analysis method using linear combination wavelet transform is proposed. And it is applied to diagnostic monitoring system using the proposed linear combination wavelet transform. The stationary and nonstationary signal is used linear chirp signal, fan noise signal, a sinusoid signal from revolution body, electronic signal. Transform applied to signal analysis use fast Fourier transform (FFT), Daubechies, Haar and proposed linear combination method. The result of time-frequency analysis using linear combination wavelet transform is suited for portraying nonstationary time signal as well as stationary signal. Also the diagnostic monitoring system carry out the effective the signal analysis.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2022.05a
• /
• pp.546-549
• /
• 2022

In recent years, to prevent the increase in accidents at industrial sites, various innovative technologies from the 4th industrial era have been incorporated into the construction administration to promote the advancement of safety management. As a result, smart safety management systems using intelligent monitoring that prevent and manage risks in industrial sites in real time are attracting attention. Smart safety management systems provide users with real-time, remote monitoring of factors such as noise, gas concentration fine dust concentration, building material quality, building tilt, and RFID-based worker access through sensors located everywhere. This paper presents a method for collecting and monitoring various data for smart safety management systems via Zigbee communication using Raspberry Pi.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2009.04a
• /
• pp.226-229
• /
• 2009

굴삭기는 다양한 산업 분야에서 폭넓게 이용되고 있는 대표적인 장비임에도 불구하고 작업 환경은 매우 열악하여 굴삭 조종자는 각종 소음이나 진동, 분진에의 노출뿐만 아니라 산업재해의 위험성 또한 높다. 이러한 문제점들을 타개하기 위하여 현재 국내에서는 2006년부터 지능형굴삭시스템(Intelligent Excavating System)에 의한 자동화된 굴삭기의 개발을 위하여 연구를 진행 중에 있다. 자동화 굴삭시스템 구축에 있어서 센싱(sensing)을 통해 획득된 지형 및 주변 환경정보를 활용하여 숙련공의 휴리스틱스(heuristics)를 바탕으로 설계된 모듈을 통해 최적의 굴삭 작업 계획을 세우고, GUI (Graphic User Interface)를 제공하여 실시간 작업진행 상태 파악 및 모니터링(monitoring) 내용을 굴삭기 조종자와 공사 감독관에게 제공하는 Task Planning System의 개발은 생산성, 안전성, 작업의 품질 및 장비의 성능에도 지대한 영향을 미치며 자동화된 굴삭시스템을 개발함에 있어서 필수적으로 요구되어지는 핵심기술이다. 본 논문에서는 자동화 굴삭시스템을 위한 자동화 계획생성 시스템인 Task Planning System의 현재까지 진행된 연구 내용과 모니터링 및 작업에 대한 최소간섭을 위한 Task Planning System Interface를 소개한다.

• Proceedings of the KIEE Conference
• /
• 2000.07d
• /
• pp.3198-3200
• /
• 2000

엘리베이터의 고장 상태를 원격지에서도 상시 감시할 수 있는 시스템을 구현하였다 엘리베이터에 고장이 발생하는 경우에는 신속한 수리가 매우 중요하지만, 엘리베이터마다 전문 기술 인을 상시 근무시키는 일은 쉽지 않다. 본 논문은 최근 발달한 컴퓨터와 통신망 기술을 이용하여 대량의 엘리베이터를 원격지에서 전문적으로 감시하게 하여 엘리베이터 이용자에게는 보다 안전한 운전과 신속한 수리를 보장받게 하고 엘리베이터 관리회사는 신용과 효율성을 확보할 수 있게 하기 위한 것이다. 이 시스템은 엘리베이터 상태 감시 모듈, 비상사태 상태감시 모듈, 음성 및 데이터 통신망 및 원격 모니터링 시스템으로 구성된다. 상태 감시모듈은 엘리베이터의 비정상적인 동작을 상시 감시하여 이상 발생 시 엘리베이터의 관리회사에 즉시 통보하며, 비상사태 감시 모듈은 엘리베이터 내부의 소음 상태를 측정하여 강도나 엘리베이터의 갇힘 상태 등을 감시한다. 또, 음성 및 데이터 통신망은 기존의 전화 연결 망에 모뎀을 통하여 연결되게 함으로써 저렴한 가격으로 구성이 가능하게 하며, 원격 모니터링 시스템은 관리회사에 보고된 엘리베이터의 이상 상태를 그래픽을 통하여 적절히 표시하고 응급 조치 연락망에 연락하거나 수리에 필요한 기구나 부품들을 제시한다.