• Title/Summary/Keyword: 소유역 매개변수

Search Result 134, Processing Time 0.026 seconds

A Study on Estimation of Flood Discharge by Extraction Method of Geomorphological Factors (지형인자 추출방법에 따른 홍수유출량 추정에 관한 연구)

  • Jeong, Ha-Ok;Park, Sang-Woo;Jang, Suk-Hwan
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2008.05a
    • /
    • pp.699-703
    • /
    • 2008
  • 현재 홍수유출량을 산정하기 위해서 실무에선 각 하천마다 유출량에 대한 자료들이 부족한 실정으로 Clark 및 Snyder 등의 여러 가지 합성단위도법을 이용하여 홍수유출량을 추정하고 있는 실정이다. 이와 같이 합성단위도법을 이용하여 유출량 추정시 가장 중요시 되는 도달시간 및 저류상수 등의 매개변수를 산정하기 위하여 수자원분야에서도 GIS의 기법을 도입하여 대상유역의 수문학적 지형인자들을 추출하는 방법을 채택하고 있다. 이는 과거의 방법에 비하여 손쉽고 정확하며 신뢰성 있는 자료들을 제공하고 있지만 하천망 생성 및 유역분할 등을 생성하는 과정에서 각 적용시킨 모형마다 약간의 차이를 보이고 있는 실정이다. 따라서 본 연구에서는 각 방법들에 의해 추출되어지고 있는 지형인자들을 보다 정확하고 신뢰성 있는 수문학적 지형인자를 추출하고 이를 강우-유출모형에 적용시켜 자연하천유역의 홍수유출량을 추정하기 위하여 적절한 지형인자 추출 방법을 제시하고자 한다. 강우-유출 모의시 중요시되는 매개변수 산정을 위해 수자원종합관리시스템을 구현하기 위해 국내기술로 개발된 HyGIS 모형과 기존의 지형인자 추출 방법 중에 하나인 Arcview GIS 모형을 적용하여 분할된 소유역 및 격자크기별로 지형인자들을 추출하여 두 모형의 차이를 비교 분석하였으며 이를 토대로 매개변수 및 홍수유출량 추정에 미치는 영향을 분석 하였다. 추정된 유출량을 검증하기 위하여 실측된 유량자료로 개발된 수위-유량관계곡선식을 이용한 홍수량과 비교 검토하였다.

  • PDF

Development of Rainfall-Runoff Model on Han River(II) - Model Construction - (한강수계 유역유출 분석 모형 구축(II) - 모델구성을 중심으로-)

  • Maeng, seung-jin;Chanda, trivedi
    • Proceedings of the Korea Contents Association Conference
    • /
    • 2008.05a
    • /
    • pp.788-791
    • /
    • 2008
  • On this study, following works have been carried out : division of Han River Basin into 24 sub basins, use of rainfall data of 151 stations to make spatial distribution of rainfall, selection of control points such as Soyanggang Dam, Chungju Dam, Chungju Release Control Dam, Heongseong Dam, Hwachun Dam, Chuncheon Dam, Uiam Dam, Cheongpyung Dam and Paldang Dam, selection of SSARR (Streamflow Synthesis and Reservoir Regulation) model as a hydrologic model, preparation of input data of SSARR model, sensitivity analysis of parameter using hydrologic data of 2002. The sensitivity analysis showed that soil moisture index versus runoff percent (SMI-ROP), baseflow infiltration index versus baseflow percent (BII-BFP) and surface-subsurface separation (S-SS) parameters are higher sensitive parameters to the simulation result.

  • PDF

Peak discharge prediction by multiple regression analysis using hourly precipitation data (시강우량 다중회귀분석에 의한 첨두유량 예측)

  • Park, Chang-Eon
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2017.05a
    • /
    • pp.380-380
    • /
    • 2017
  • 유역에서 발생되는 유출량의 크기를 예측하는 것은 홍수피해를 대비하기 위한 가장 기초적인 활동으로 이루어지며, 이를 위하여 많은 수문모형들이 개발되어 활용되어지고 있다. 이러한 수문모형의 적용을 위해서는 먼저 해당 유역을 재현할 수 있는 매개변수의 보정이 이루어져야 하며 적절한 정도 이상의 검정결과를 확보하여야만 적용이 가능하다. 그러나, 유역 내의 각종 수문특성을 모형의 매개변수로 자세히 나타내는 것은 쉬운 작업이 아니며, 특히 정해진 기간 내에 적용해야 하는 유역이 다수인 경우에는 더욱 힘든 작업이 될 수밖에 없다. 기후변화에 따라 예견되는 강우량 발생 시나리오를 바탕으로 남한 일대의 홍수영향을 지자체별로 평가하기 위한 작업에서는 각 지자체별 많은 소유역에서의 적절한 수문모형 매개변수를 개별적으로 찾아내는 것은 사실상 불가능할 것으로 예견되어, 기후변화 시나리오에서 주어지는 시간별 강우량 자료를 활용하여 첨두유량을 예측할 수 있는 통계적인 방법을 적용하였다. 홍수영향을 평가하기 위하여는 수문곡선 자체보다는 첨두유량의 크기가 더 중요할 것으로 판단되어, 홍수통제소에 제공하는 각 유량관측지점의 유량자료와 시간별 강우량자료로부터 단위 호우사상별 첨두유량과 일정 시간간격 강우량 사이의 다중회귀분석을 통하여 첨두유량 예측 가능성을 확인하였다. 다중회귀분석을 위한 시간간격별 강우량은 각 강우사상에 대하여 첨두유량 발생 직전의 1시간~12시간의 1시간 간격, 1일, 2일, 3일, 5일, 10일 등 17가지의 시간간격 동안의 강우량 자료를 찾아 다중회귀분석에 활용하였으며, 2006년부터 2015년까지 최근 10년 동안의 홍수통제소 자료를 활용하였다. 대상지역은 경기도 남부의 너부대교, 경안교, 복하교, 수직교 수위관측소지점으로 선정하였으며, 일정 크기 이상의 첨두유량 자료를 선별하여 해당 기간에 대한 강우량 자료를 준비하고, 유출량의 크기별로 분류하여 절반의 호우사상은 매개변수 보정에 그리고 나머지 절반의 호우사상은 모형의 검정에 사용하였다. 매개변수 보정결과는 $R^2$ 값이 0.87~0.96을 보이는 등 첨두유량의 예측에 충분히 적용가능한 것으로 판단되었으며, 보정되어진 매개변수로 실시한 검정에서는 0.76~0.85의 $R^2$ 값을 보였다. 본 연구의 결과를 바탕으로, 충분한 유량자료와 시간별 강우량자료만 준비된다면 첨두유량을 예측할 수 있는 회귀방정식으로 이루어진 간단한 모형을 구성할 수 있으며, 이를 활용하여 임의로 주어지는 시간별 강우량 자료를 활용하여 첨두유량의 예측이 가능할 것으로 판단되었다.

  • PDF

Estimation of Naturalized Streamflow using RRFS Model (RRFS 모형을 이용한 자연유량산정)

  • Ryoo, Kyong-Sik;Hwang, Man-Ha;Ko, Ick-Hwan
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2006.05a
    • /
    • pp.1777-1781
    • /
    • 2006
  • 수자원장기종합계획 보고서 및 저수지운영상에서는 실측을 통해 자연유량을 산정하지 않고 간접적인 방법인 강우-유출모형을 이용하여 자연유량을 산정하고 있다. 그러나 일반적인 강우-유출모형의 검증은 인위적인 영향이 적을 것이라 판단되는 일부 특정지역을 대상으로 실시하며 이에 대한 결과를 전 유역에 동일하게 반영하였기 때문에 금강유역과 같은 대유역에서는 각 소유역별 유출특성이 반영되지 못하고 있는 실정이다. 따라서 본 연구에서는 모형의 안정성 고취를 위해 모형외적으로 강우, 생 공 농업용수 이용량 및 관측유량자료 등의 기본 수문자료에 대한 검 보정을 실시하였으며 모형내적으로는 적정매개변수의 선정을 위해서 토양습윤상태별 유출율, 침투량별 지하수 유입률, 지표수와 복류수 분리 등을 반복적인 수행과정을 걸쳐 적정한 매개변수를 산정하였으며 RRFS모형에 의한 일별 유출량산정 결과를 비교분석을 실시하여 모의유량의 신뢰도를 고취시킨 후 인위적인 요소를 모두 배제시켜 자연상태의 유출량인 자연유량을 산정하고자 한다.

  • PDF

Optimal Parameters Estimation of Diffusion-Analogy Geomorphologic Instantaneous Unit Hydrograph Model (확산-유추 지형학적 순간단위도 모형의 최적매개변수 추정)

  • Kim, Joo-Cheol;Choi, Yong-Joon
    • Journal of Wetlands Research
    • /
    • v.13 no.3
    • /
    • pp.385-394
    • /
    • 2011
  • In this study, optimal parameters of diffusion-analogy GIUH were calculated by separating channel and hillslope from drainage structures in the basin. Parameters of the model were composed of channel and hillslope, each velocity($u_c$, $u_h$) and diffusion coefficient($D_c$, $D_h$). Tanbu subwatershed in Bocheong river basin as a target basin was classified as 4th rivers by Strahler's ordering scheme. The optimization technique was applied to the SCE-UA, the estimated optimal parameters are as follows. $u_c$ : 0.589 m/s, $u_h$ : 0.021 m/s, $D_c$ : $34.469m^2/s$, $D_h$ : $0.1333m^2/s$. As a verification for the estimated parameters, the error of average peak flow was about 11 % and the error of peaktime was 0.3 hr. By examining the variability of parameters, the channel diffusion coefficient didn't have significant effect on hydrological response function. by considering these results, the model is expected to be simplified in the future.

The Estimation of Annual Runoff using Rainfall-Runoff Model in Korea (강우-유출 모형에 의한 전국 연평균유출량 산정)

  • Kang, Shin-Uk;Lee, Gwang-Man;Lee, Dong-Ryul
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2005.05b
    • /
    • pp.610-613
    • /
    • 2005
  • 국가 수자원계획을 위해 필요한 방대한 자료 중 하나인 강수에 의한 각 유역별 유출량 산정은 매우 중요한 요소이다. 과거 수자원계획에서는 비유량법을 사용하여 각 유역의 유출량을 산정하여 왔다. 하지만 갈수기, 홍수기에 많은 불확실성이 내재되어 있음이 많은 연구에 의해 보고되어지고 있다. 본 연구에서는 표준 4단 탱크모형의 이후에 만들어진 토양수분 저류구조를 가진 탱크모형을 사용하고 개념적 융설모형을 사용하여 전국의 자연 유출량을 산정하고자 한다. 연구에 사용한 소유역단위는 수자원단위지도의 중권역 117개이다. 매개변수의 추정에 사용된 지점은 다목적댐, 용수전용댐, 신뢰성 있는 수위관측소 상류유역 등 총 24개 지점이며, 매개변수 추정에 사용한 최적화 방법은 신뢰성이 검증된 SCE-UA 전역최적화 방법을 사용하였다. 이와 같이 추정된 매개변수를 사용하여 각 권역별 연평균 유출량을 제시하였다.

  • PDF

Uncertainty Assessment of Single Event Rainfall-Runoff Model Using Bayesian Model (Bayesian 모형을 이용한 단일사상 강우-유출 모형의 불확실성 분석)

  • Kwon, Hyun-Han;Kim, Jang-Gyeong;Lee, Jong-Seok;Na, Bong-Kil
    • Journal of Korea Water Resources Association
    • /
    • v.45 no.5
    • /
    • pp.505-516
    • /
    • 2012
  • The study applies a hydrologic simulation model, HEC-1 developed by Hydrologic Engineering Center to Daecheong dam watershed for modeling hourly inflows of Daecheong dam. Although the HEC-1 model provides an automatic optimization technique for some of the parameters, the built-in optimization model is not sufficient in estimating reliable parameters. In particular, the optimization model often fails to estimate the parameters when a large number of parameters exist. In this regard, a main objective of this study is to develop Bayesian Markov Chain Monte Carlo simulation based HEC-1 model (BHEC-1). The Clark IUH method for transformation of precipitation excess to runoff and the soil conservation service runoff curve method for abstractions were used in Bayesian Monte Carlo simulation. Simulations of runoff at the Daecheong station in the HEC-1 model under Bayesian optimization scheme allow the posterior probability distributions of the hydrograph thus providing uncertainties in rainfall-runoff process. The proposed model showed a powerful performance in terms of estimating model parameters and deriving full uncertainties so that the model can be applied to various hydrologic problems such as frequency curve derivation, dam risk analysis and climate change study.

Determination and Evaluation of Optimal Parameters in Storage Function Method using SCE-UA (SCE-UA를 이용한 저류함수모형 최적 매개변수 선정 및 평가)

  • Chung, Gunhui;Park, Hee-Seong;Sung, Ji Youn;Kim, Hyeon-Jun
    • Journal of Korea Water Resources Association
    • /
    • v.45 no.11
    • /
    • pp.1169-1186
    • /
    • 2012
  • Storage function method has been used for flood forecasting in the major rivers in Korea, however, the researches on the relationship between the parameters and runoff characteristics was not sufficient. In addition, there has been a controversy about the optimized parameters without the consideration of the physical characteristics of the basin. Therefore, in this study, the SCE-UA method is used to optimize the parameters and the proposed method was applied with two stage optimization in the Jeongseon and Yeongwol watersheds located in the most upstream in the South Han river. The contour map was developed to investigate parameters and the error surface calculated from the runoff. The proposed parameters is to provide a range of the possible parameter set in a watershed, rather than a specific value. However, the applicability is examined using the average value of the proposed ranged parameters. In this study, the criticism about the optimization technique to find an optimal value having no physical meaning on a watershed is tried to avoid. The objective of this study is to provide a range of parameters for the flood forecasting model and the intuition about the behavior of the parameters, so the efficiency of flood forecasting is increased.

Development of Semi-Distributed TOPMODEL (준분포형 TOPMODEL 개발)

  • Bae, Deg-Hyo;Kim, Jin-Hoon
    • Journal of Korea Water Resources Association
    • /
    • v.38 no.10 s.159
    • /
    • pp.895-906
    • /
    • 2005
  • The diversity of observed hydrologic data and the development of geographic information system leads significant progress for developing distributed runoff models in the world. One of the typical examples is TOPMODEL, but the spatial coverage of its application Is limited on small headwater basins. The purpose of this study attempts to overcome its limitation and consequently develops a semi-distributed TOPMODEL. The developed model is composed of two components: a watershed runoff component for a lumped representation of hydrologic runoff process on the catchment scale and a kinematic wave type hydraulic channel routing component lot routing the catchment outflows. The application basin is the $2,703km^2$ upper Soyang dam site and several daily and hourly events are selected for model calibrations and verifications. The model parameters are estimated on 1990 daily event. The model performance on correlation coefficient between observed and computed flows are above 0.90 for the verification events. It is concluded that the developed model in this study can be used for flood analysis in large drainage basins.

A Sensitivity Analysis of Model Parameters involved in Clark Method on the Magnitude of Design Flood for urban Watersheds (CLARK 유역추적법에 의한 계획홍수량 산정에 미치는 매개변수의 민감도 분석)

  • Yoon, Kwang-Wonn;Wone, Seog-Yeon;Yoon, Yong-Nam
    • Water for future
    • /
    • v.27 no.4
    • /
    • pp.85-94
    • /
    • 1994
  • A Sensitivity analysis on the model parameters involved in the Clark watershed routing method is made to demonstrate the effect of each parameter on the magnitude of 50-year design flood for small urban streams. As for the rainfall parameter the time distribution pattern of design storm was selected. For short duration storms Huff, Yen & Chow and Japanese Central type distributions were selected and the Mononobe distribution of 24-hour design storm was also selected and tested for Clark method application. The effect of SCS runoff curve number for effective rainfall and the methods of subbasin division for time-area curve were also tested. The routing parameter, i.e. the storage constant(K), was found to be the dominating parameter once design storm is selected. A multiple regression formula for K correlated with the drainage area and main channel slope of the basin is proposed for the use in urban stream practice for the determination of design flood by Clark method.

  • PDF