• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.4A
• /
• pp.735-742
• /
• 2006

In this study, the ultimate shear strength behavior of transversely stiffened curved web panels was investigated through nonlinear finite element analysis. It was found that if the transverse stiffener has a sufficient rigidity, then curved web panels used in practical designs are able to develop the postbuckling strength that is equivalent to that of straight girder web panels having the same dimensional and material properties. The nonlinear analysis results indicate that in order for curved web panels to develop the potential postbuckling strength. The rigidity of the transverse stiffener needs to be increased several times the value obtained from the Guide Specifications (AASHTO, 2003). However, in the case of thick web panels where the shear design is governed by shear yielding, the stiffener rigidity does not have to be increased. From the analysis results, a simple design formula is suggested for the rigidity of transverse stiffener under strength limit state.

• Computational Structural Engineering
• /
• v.10 no.4
• /
• pp.22-29
• /
• 1997

본 기사에서는 경사케이블의 자중의 현 방향성분을 고려하여 케이블의 동적 강성 행렬을 유도하였다. 이 동적 강성 행렬로부터 부재 자체의 동적특성을 자세히 파악할 수 있을 뿐만 아니라 다른 구조물과 결합되었을 경우 동해석에 소요되는 시간을 대폭적으로 줄일 수 있고 거동을 예측할 수 있다는 장점이 있다. 유도된 동적 강성값을 다른 연구결과와 비교해본 결과, 실 구조물의 부재롤 사용되는 경사 케이블은 중량이 비교적 크기 때문에 현 방향 자중성분을 무시할 수 없으며 항상 복합 모드 현상을 보인다는 것을 알았다. 또한 이러한 복합 모드형성으로 인해 경사 케이블의 동적 강성값은 기존의 동적 강성값보다 좀 더 큰 값을 보인다.

• Journal of Korean Society of Steel Construction
• /
• v.16 no.1 s.68
• /
• pp.1-10
• /
• 2004

A study on the evaluation of proper spacing and required flexural rigidity of cross beams in composite two I-section steel girder bridges without a lateral and sway bracing system was performed. Specifically, a 2-lane, 40-m simple span bridge and a 3-span continuous (40+50+10m) bridge were designed, and structural analyses under dead load before and after composite, live, wind, and seismic loads were performed using spacing and flexural rigidity or cross beams as parameters. Through parametric analysis, the effect on the stresses due to the combination of loads and live load distribution was investigated. In addition. material and geometric nonlinear analyses under dead load before composite were performed to evaluate the lateral buckling strength of the steel girders and cross beam. Based on the results or such analyses, the proper spacing and flexural rigidity of cross beams at intermediate points and supports were proposed.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.17 no.4
• /
• pp.459-467
• /
• 2004

This paper presents an efficient reanalysis algorithm, named PRAS (Partial Reanalysis algorithm using Adaptable Substructuring), for the partially changed structures. The algorithm recalculates directly any displacement or member force under consideration in real time without a full reanalysis in spite of local changes in member stiffness or connectivity_ The key procedures consists of 1) partitioning the whole structure into the changed part and the unchanged part, 2) condensing the internal degrees of freedom and forming the unchanged part substructure, 3) assembling and solving the new stiffness matrix from the unchanged part substructure and the changed members.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.15 no.1
• /
• pp.165-172
• /
• 2002

Generally, the steel rigid frame has been analyzed using finite element analysis tools. While many efforts have been poured into the understanding and accurate prediction for the nonlinear behavior of the columns and beam-columns connections, the base of the columns are modeled as simply hinged or fixed. However, the base of the steel columns practically is neither fixed not hinged. It behaves as semi-rigid. In this paper, the supports of the columns we modeled as semi-rigid and the importance of such approach in moment-resisting columns is evaluated. Two typical buildings designed by the US specification are modeled and analyzed by the finite element based on stiffness method and flexibility method. The column bases of three-story buildings are modeled as rotational springs with a varying degree of stiffness and strength that simulates the semi-rigidity of the base. Depending on the degree of stiffness and strength, the semi-rigidity varies from the hinged to the fixed. Buildings with semi-rigid column bases behaves similarly to the building with fixed bases. It has been numerically observed through the pushover and nonlinear time history analyses that the decrease of the stiffness of the column base induces the rotational demand on the int air beams. an increase of rotation demands on the first store connections and lead to a soft-story mechanists Due often to the construction and environmental effects, undesired reduction of column base stiffness may cause an increase of rotation demands on the first store connections and lead to a soft-story mechanism.

• Journal of Korean Society of Steel Construction
• /
• v.14 no.6
• /
• pp.691-699
• /
• 2002

A study on the evaluationof the proper spacing and required bending rigidity of cross beams in composite multiple I-girder bridge without lateral and sway bracing system was performed. For the purpose, a two-lane 40m simple span and 40+50+40m continuous sample bridge with four girders was designed. For the sample bridges, structural analysis under the design loads including dead load before and after composite, live load, and seismic loads has been performed. The material and geometric nonlinear analysis under dead load before composite has also been performed to evaluate lateral buckling strength of the steel-girder-cross beam grillage. Based on the two phase anlayses, proper spacing and bending righidity of cross beams were proposed.

• Journal of Korea Technology Innovation Society
• /
• v.7 no.2
• /
• pp.441-458
• /
• 2004

이동망의 착신접속서비스는 각국에서 bottleneck 서비스로 인식하고 규제당국에서 원가에 근거하여 규제하고 있다. 원가에 의한 규제 방식으로 과거에는 회계자료를 근거로 한 역사적 원가가 사용되어 왔으나 최근에는 유선망의 경우처럼 bottom-up 방식의 장기증분원가(Long Run Incremental Cost ： LRIC)를 적용하는 사례가 증가하고 있다. LUC를 산정하기 위해서는 공학적인 기준에 따라 이동망을 설계하여 정확한 망 구성요소별 소요량을 측정하고 이를 투자비로 전환하는 작업이 필요하다. 유선망의 경우는 LRIC산정을 위한 망 설계방법론이 비교적 잘 확립되어 있으나, 이동망의 경우는 망 설계 및 망 구성요소별 소요량 산정방법론에 대한 연구가 부족한 실정이다. 본 고에서는bottom-up방식의 이동망 LRIC산정관련 해외 사례를 살펴보고 국내 실정에 적합한 이동망 설계 방법과 망 구성 요소별 소요량 산정 방법론을 제시해보고자 한다.

• Information and Communications Magazine
• /
• v.7 no.4
• /
• pp.49-72
• /
• 1990

본고에서는 백조 시스팀의 전반적인 개념 및 구조에 대해 개괄하고, 그리고 여기에 필요한 소요 기술 및 개발 현황에 대해 기술 하였다. 또한 향후 광대역 서비스의 수용을 위해 전개되어야 할 망의 진화 방향에 대하여 고찰과 더불어 백조 시스팀의 앞으로의 발전 방향에 대해 논의하였다.

• Journal of Korean Society of Steel Construction
• /
• v.22 no.4
• /
• pp.293-303
• /
• 2010

The purpose of this study was to evaluate the influence of the methods of application of the direct analysis method, using the load amplification factor suggested by the KBC 2009 design code, for the evaluation of frame stability. For this purpose, the direct analysis method was performed for three-story-one-bay and five-story-three-bay unbraced steel frames with various notional loads, bending stiffness reductions, and factor B2s. The results of the analyses were compared with the results of the second-order inelastic analysis to evaluate the influence of the applied methods. The scale of the frame, the axial load ratio, and the axial load distribution pattern were added to the main parameters to investigate the external effects. The research results showed that the influence of the methods of application of the direct analysis method is not significant in the case of the required axial strength and the application of the additional notional loads; and that the application of the factor B2 with the story stiffness concept to the direct analysis method is appropriate for the required flexural strength.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.14 no.2
• /
• pp.203-211
• /
• 2001

고층구조물의 해석에 사용되는 ETABS와 같은 상용프로그램은 해석의 단순화를 위하여 강막가정을 사용하게 된다. 이와 같은 강막가정은 일반적으로 바닥판의 휨 강성과 보의 편심효과를 무시하게 된다. 이러한 가정은 골조구조물의 정적해석에 대해서는 정당한 결과를 얻을 수 있으나 동적해석의 경우에는 바닥판의 휨 강성과 보의 편심효과가 구조물의 횡 방향 거동에 주요한 영향을 미치게 된다. 그러나 바닥판의 영향과 보의 편심효과를 고려하기 위해서는 유한요소의 특성상 바닥판과 보를 여러 개의 요소로 나누어야 하며, 이로 인하여 해석과 구조물의 모형화에 많은 시간이 소요되는 단점이 발생하게 된다. 본 논문에서는 이러한 단점을 보완하기 위하여 부분구조기법과 대형요소를 사용한 효율적인 모형화 방법에 대하여 연구하였다. 또한 최종적으로 각 층에 대하여 강막가정을 적용하여 층 당 3개의 자유도만을 고려하는 막대모델을 제안하였다. 본 논문에서는 제안한 모형화기법의 정당성을 검토하기 위하여 구조물의 응답을 비교하였다.