• Applied Chemistry for Engineering
• /
• v.23 no.3
• /
• pp.253-258
• /
• 2012

The effects of active sites and valence states were investigated over $Pd/TiO_2$ catalyst on simultaneous oxidation of $CH_4$ and CO. The Pd species (PdO) crystallite size increased with increasing Pd loadings, which results in enhancement of the activity of $CH_4$ oxidation. Different results from the activity of $CH_4$ and CO oxidation were shown to be dependent on the Pd valence state on the surface of the catalyst prepared through a thermal treatment. XRD and $H_2-TPR$ analysis confirmed that $Pd^{2+}$species was predominated in the calcination catalyst, while $Pd^0$species was predominated in the reduction catalyst. Additionally, it could be found that the valence state of Pd was a more important factor on the catalytic activity than that of factors as the surface area and pore volume. The reaction mechanism of $CH_4$ and CO followed by the valence state of Pd could be identified using FT-IR analysis.

• Korean Journal of Food Science and Technology
• /
• v.27 no.6
• /
• pp.839-844
• /
• 1995

Appropriate types and concentrations of starch-based fat replacers which are low-pH stable, shear resistant and heat stable were selected to develop reduced-fat mayonnaise without affecting taste, texture and emulsion stability. Four kinds of commercial fat replacers [Neutral DR (DR), Stellar 100X (SX), Sta Slim 150 (SS) and N-Lite L (NL)] were thermally activated after appropriately hydrated and applied to mayonnaise formulation. For each fat replacer, eight recipes having various ratios of soybean oil/fat replacer(95/5 to 60/40) were formulated and compared with standard formulation(100% soybean oil) using rheological and sensory evaluations. All tested starch pastes showed pseudoplastic behavior, time-dependent thixotropic gel characteristics. The increasing order of pseudoplasticity and yield stress was RM, NL, SS and ST. The hardness and adhesiveness of each fat replacer-added mayonnaise was increased in the same order as above. Formulated mayonnaise which contained higher ratio of fat replacer showed lower values in hardness and adhesiveness. ST at up to 25% oil replacement exhibited the highest oil replacing ability among four replacers. ST-added mayonnaise also exhibited the highest sensory score and emulsion stability among all products including standard formula. The high sensory score in spreadability of RM-added mayonnaise well reflected the consistent index of RM paste. Use of fat replacers reduced oily odor and greasy aftertaste of mayonnaise.

• Korean Journal of Food Science and Technology
• /
• v.16 no.1
• /
• pp.29-36
• /
• 1984

Flow behaviors of rice starch-water systems containing 3-9% (w/v) of native and gelatinized starch solutions were studied with the capillary tube rheometer in the temperature range of $30-80^{\circ}C$. Flow behaviors of rice starch-water systems showed non-Newtonion behavior which could be expressed as ${\gamma}{\;}=\;{\psi}(^{\tau}g_c-{\tau}_yg_c)^N$. Flow parameters ${\psi}$, N and $^{\tau}_y$ were determined for native and gelatinized solutions. These parameters indicated that native rice starch solution shows a dilatancy and the gelatinized solution ranges from pseudoplastic to mixed type flow behavior with increasing concentrations. The value of flow behavior index for gelatinized solutions was about 1.2 in all samples but for native solutions, the values were 0.87-0.90. The values of yield stress, which were negligible below 5%, were increased with the increase in concentration from 5 to 9%. The value of consistency index was exponentially dependent on concentration and temperature. The values of activation energy for native and gelatinized solutions were 0.13-2.71 and 5.39-9.57 kcal/g mole, respectively.

• Korean Journal of Food Science and Technology
• /
• v.22 no.6
• /
• pp.646-650
• /
• 1990

To develop a new form of spice material by concentration of garlic juice, its rheological properties were investigated. In the temperature range of $15\;to\;65^{\circ}C$, the garlic juice with the solid content of $32\;to\;60^{\circ}Brix$ was considered as a pseudoplastic fluid. Flow and consistency indices of the juice interpreted by power-law equation varied from $0.9937\;to\;0.6130\;and\;0.0041\;to\;3.1886Pa{\;s^n$, respectively. Apparent viscosity was lineally decreased as shear rate was increased. Activation energy for the flow of the garlic juice changed in the range of 11,216 to 23,195 kJ/kg mol.

• Korean Journal of Food Science and Technology
• /
• v.20 no.4
• /
• pp.470-475
• /
• 1988

The extrusion-cooking method was used to make gelatinized rice extrudate from rice grits of the Chuchung and the Samgang varieties. The water contents of raw rice grits varied from 15% to 25%, and the physicochemical properties of extrudates were evaluated. Low moisture content showed high expansion ratio in rice extrudate and resulted in some decrease in gelatinization, bulk density and break strength. Increasing the water content to 25% resulted in increase in water absoption index but decrease in water solubility index. With regards to Brabender Amylograph values and rheological patterns, higher moisture content in raw materials revealed stronger pseudoplastic flow behavior with lower viscogram property. Hunter's color values of rice flours extruded at low water content were low in b values. Scanning electron microscopy demonstrated the break-down of starch granules during extrusion.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.5
• /
• pp.1043-1058
• /
• 1990

The Strain rate effect in electro-magnetic forming, which is one of the high velocity forming methods, is studied by the finite element method in this paper. The forming process is simplified by neglecting the coupling between magnetic field and work-piece deformation, and the impulsive magnetic pressure is regarded as inner pressure load. A rate-dependent elasto-plastic material model, of which tangential modulus depends of effective strain rate, is proposed. The model is shown to well describe the transient increase of yield stresses, the decreases of the final displacement and yield stress, the decrease of the difference in the distribution of deformation along the axial direction, and the change of deformation mechanism due to strain rate effect. As a result, displacement, final deformed shape, radial velocity, deformation energy, and the changes of effective stress, effective strain and effective strain rate through plastic working are given. Based on the results, the effectiveness of this model and the strain rate effect of the deformation process of the work-piece are discussed.

• Korean Journal of Food Science and Technology
• /
• v.22 no.1
• /
• pp.38-43
• /
• 1990

Effects of concentration (5-8%, db) and heating temperature $(80^{\circ}C-95^{\circ}C)$ on rheological of mungbean starch were examined. The pasting curve by amylograph revealed no peak viscosity and the viscosity continued to increase during cooking, regardless the starch concentrations. Mungbean starch paste showed a pseudoplastic flow behavior with yield stress. The consistency index of paste increased as the heating temperature was raised at a given concentration. However, flow behavior index showed opposite trend. The percent sag of starch gel stored at $4^{\circ}C$ decreased with the increase of concentration and heating temperature. The firmness of fresh gel prepared from 7 and 8% starch suspensions by heating at $95^{\circ}C$ for 15 min with amylograph was about 2-times higher than that of 6% gel. However, the time constant, reciprocal of rate constant, of starch gels during aging at $4^{\circ}C$ was not significantly influenced by concentrations and heating temperatures.

• Journal of Bio-Environment Control
• /
• v.27 no.4
• /
• pp.391-399
• /
• 2018

In this paper, experimental study performed on steel-pipe connections for structural members of a greenhouse is presented. By those experiments performed, bending moment, deformation and stress distribution of specimens were investigated under four point bending test. The bending performance according to connection method using pin and the stretching is also investigated. The results of bending performance of the no connection specimen were compared to those of other connection specimens. The pin and stretching connection specimens showed lower banding performance than the no connection specimen. The stretching connection method was relatively higher bending performance than the pin connection specimens. According to the results, we proposed the connection method with good bending performance that can be applied to steel-pipe connection in greenhouse.

• Composites Research
• /
• v.12 no.2
• /
• pp.10-25
• /
• 1999

A new evaluation method for the interfacial properties of fibrous composites based on a fragmentation technique is proposed by using the gradual multi-fiber composite, in which the inter-fiber spacing is gradually changed. The results showed that as the inter-fiber distance increased, the aspect ratio of broken fibers decreased while the interfacial shear strength between the fiber and matrix increased. When the reciprocal of the inter-fiber destance was taken for the above relations, both the aspect ratio and interfacial shear strength showed a saturated value. This means that the gradual multi-fiber composite indicates an upper bound in aspect ratio and an upper bound in interfacial shear strength. It was concluded that this fragmentation test could be a new method for composite evaluation, since reducing a difference between these two bounds is effective for composite strengthening. In addition an elastoplastic finite element analysis was carried out to relate the above results with fiber stress a distribution around fiber breaks. It was proved that the bound obtained in the gradual multi-fiber composite test is closely related to stress concentrations caused by a group of multi-fiber breaks.

• Korean Journal of Food Science and Technology
• /
• v.35 no.2
• /
• pp.188-194
• /
• 2003

천마식품가공시 기초자료로 활용될 수 있는 천마 추출농축액의 리올로지 특성을 조사하였다. 천마의 열수 및 50% 에탄올 추출물운 각각 5, 10, 15, 및 20 Brix와 10, 20, 30, 40 및 50 Brix로 농축하여 제조하였다. 열수 및 50% 에탄올 농축액의 정상유동특성과 동적점탄성을 조사하였다. Power law model로 구한 n에 의하면 모든 열수 농축액들은 전형적인 의가소성$(n=0.484{\sim}0.802)$유체의 흐름특성을 보였고, 50% 에탄올 농축액들은 뉴튼유체$(n=0.875{\sim}1.078)$에 가까운 흐름특성을 나타내었다. 열수 및 50% 에탄올 농축액의 ${\eta}_{app}$는 온도가 증가함에 따라 감소하는 경향을 나타내었다. Herschel-Bulkley model에 의한 열수 및 50% 에탄올 농축액의 C는 각각 $0.030{\sim}1.255$ Pa와 $0.007{\sim}0.065$ Pa이었다. ${\eta}_{app}$에 대한 온도 및 농도의 영향은 arrhenius식으로 해석하였다. 열수 및 50% 에탄올 농축액의 $E_a$는 농도가 증가함에 따라 각각 $3.340{\sim}4.620{\times}10^3\;J/mol{\cdot}kg$과 $1.6289{\sim}18.6699{\times}10^3\;J/mol{\cdot}kg$의 범위로 나타났다. 진동수(angular frequency, ${\omega}$)가 증가할수록 저장탄성률(storage modulus, G#)과 손실탄성률(loss modulus, G@)은 일반적으로 증가하는 경향을 나타냈다. 50% 에탄올 농축액의 경우 모든 진동수에서 G#이 G@보다 높게 나타나 전형적인 저분자용액의 흐름특성을 보였다. 그러나 열수농축액의 경우 G@이 G#보다 높았고 0.5 rad/sec에서 교차점을 형성하였으며 전형적인 고분자 용액의 흐름특성을 나타내었다.