• The Journal of the Korea institute of electronic communication sciences
• /
• v.5 no.1
• /
• pp.10-16
• /
• 2010

90/150 CA is a CA completely specified by using rule 90 and rule 150. Since 90/150 CA whose minimal and characteristic polynomials are identical has outstanding randomness, this CA is more attractive than LFSR. Sarkar proposed a scheme based on the 90 uniform CA and the 150 uniform CA. That scheme provided authentication by digital signature and other basic security requirements like confidentiality. In this paper we analyze 90 or 150 uniform CA and give a synthesis method of 2n-cell uniform CA and (2n+1)-cell uniform CA using a special n-cell 90/150 CA. And we propose an effective method of computation of characteristic polynomial corresponding to uniform CA.

• Journal of the Korea Society of Computer and Information
• /
• v.19 no.12
• /
• pp.81-89
• /
• 2014

The heterogeneous LTE-Advanced networks comprising a macrocell and femtocells can provide an efficient solution not only to extend macrocell coverage but also to deal with packet traffics increasing explosively within macrocells. Efficient resource management schemes are necessary to maintain the QoS requirements of versatile multimedia applications in LTE-Advanced networks because their service-continuity may be defected by some delay and information loss. In this paper, we propose a resource allocation method for the heterogeneous LTE-Advancedl networks overlaid with femtocells. Performances are analyzed by simulation.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.9 no.2
• /
• pp.187-193
• /
• 2004

For a power source of usual electronic devices such as PDA, smart phone, UPS and electric vehicle, the battery made of serially connected multiple cells is generally used. In this case, if there are some unbalanced among cell voltages, the total lifetime and the total capacity of the battery are limited to a lower value. To maintain a balanced condition in cells, an effective method of regulating the cell voltage in indispensable. In this paper, we propose the design of a balancing circuit for electronic appliances. The balancing system was controlled by a micro-controller which enables to implement the balancing action during charging period. Proposed method has been verified by the experiment using the charger and recorder. The experimental results show that the individual battery equalization can improve battery capacity and battery lifetime and performance through an extended operational time.

• Journal of KIISE:Computer Systems and Theory
• /
• v.26 no.11
• /
• pp.1285-1295
• /
• 1999

본 논문은 방대한 크기의 볼륨 데이타를 효율적으로 렌더링하기 위한 셀 기반 웨이브릿 압축 방법을 제시한다. 이 방법은 볼륨을 작은 크기의 셀로 나누고, 셀 단위로 웨이브릿 변환을 한 다음 복원 순서에 따른 런-길이(run-length) 인코딩을 수행하여 높은 압축율과 빠른 복원을 제공한다. 또한 최근 복원 정보를 캐쉬 자료 구조에 효율적으로 저장하여 복원 시간을 단축시키고, 에러 임계치의 정규화로 비정규화된 웨이브릿 압축보다 빠른 속도로 정규화된 압축과 같은 고화질의 이미지를 생성하였다. 본 연구의 성능을 평가하기 위하여 {{}} 해상도의 볼륨 데이타를 압축하여 쉬어-？ 분해(shear-warp factorization) 알고리즘에 적용한 결과, 손상이 거의 없는 상태로 약 27:1의 압축율이 얻어졌고, 약 3초의 렌더링 시간이 걸렸다.Abstract This paper presents an efficient cell-based wavelet compression method of large volume data. Volume data is divided into individual cell of {{}} voxels, and then wavelet transform is applied to each cell. The transformed cell is run-length encoded according to the reconstruction order resulting in a fairly good compression ratio and fast reconstruction. A cache structure is used to speed up the process of reconstruction and a threshold normalization scheme is presented to produce a higher quality rendered image. We have combined our compression method with shear-warp factorization, which is an accelerated volume rendering algorithm. Experimental results show the space requirement to be about 27:1 and the rendering time to be about 3 seconds for {{}} data sets while preserving the quality of an image as like as using original data.

• Polymer(Korea)
• /
• v.33 no.5
• /
• pp.496-500
• /
• 2009

Optically compensated bend liquid crystal display (OCB-LCD) has many application fields owing to its fast response time and wide viewing angle. However, in order to operate the OCB-LCD in bend state, this device needs quick transitions from the initial splay state to bend state. Unlike conventional approach using transient high voltage for the transition, the OCB-LCD with high surface tilt angle, which was achieved by polymerization of UV curable reactive mesogen monomer under certain voltage, was manufactured and the cell showed bend state initially. Electro-optic and electrical characteristics of the cell were analyzed. The cell shows a fast response time owing to high surface pretilt angle and very low residual DC less than 0.1 V although another polymer layer is formed above polymer alignment layers.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.9A
• /
• pp.1372-1382
• /
• 1999

The major source of errors in high-speed networks such as Broadband ISDN(B-lSDN) is buffer overflow during congested conditions. These congestion errors are the dominant sources of errors in 1high-speed networks and result in cell losses. Conventional communication protocols use error detection and retransmission to deal with lost packets and transmission errors. However, these conventional ARQ(Automatic Repeat Request) methods are not suitable for the high-speed networks since the transmission delay due to retransmissions becomes significantly large. As an alternative, we have presented a method to recover consecutive cell losses using forward error correction(FEC) in ATM(Asynchronous Transfer Mode)networks to reduce the problem. The performance estimation based on the cell discard process model has showed our method can reduce the cell loss rate substantially. Also, the performance estimations in ATM networks by interleaving and IP multicast service are discussed.

• Journal of Korea Multimedia Society
• /
• v.8 no.2
• /
• pp.192-200
• /
• 2005

In this paper, an improved User Parameter Control (UPC) algorithm is proposed for controlling traffic in ATM networks. The present algorithm consists of Cell Buffer, Red Token Pool, Green Token Pool, and Spacer. A token is generated at a certain time period, and the tokens are consumed one each time a cell arrives. At this time, if the delay element, named Spacer, is empty, the cell comes into the network. On the other hand, if Spacer is not empty, the cell cannot come into the network. In addition, in the case that tokens do not exist in Token Pool, the corresponding cell is thrown away The arbitrary function of the token used in this paper is removed. Instead, the token is used only to control network traffic. This research proposes new UPC Algorithm to improve the current cell delay rate and cell loss rate by dynamically adopting the delay element, named Spacer, with respect to the traffic condition, which is different from controlling that the cell comes into the network after a certain delay time period.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.6B
• /
• pp.423-432
• /
• 2012

We design a control circuit that can switch input power between a rechargeable battery and a sensor communication device (mote) depending on the operating state of a solar cell as well as the active and sleep mode of a sensor MAC protocol. A mote that simply combines a solarcell and a rechargeable battery may die if there is not sunlight long. A battery is recharged if sunlight is sufficient and a device is in a sleep mode, and it supplies power if sunlight is low and the mote is in an active mode. A mote can switch its input power between solar cell and battery depending on the output level of a solar cell. During this switching, a mote may lose its state information due to the reset of a microprocessor by the transient power-off. A capacitor is used to cope with this phenomenon and also supplies power to a mote during a sleep mode. Experimental results show that the solar cell based mote operates in a very stable manner against the lack of sunlight long.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.7
• /
• pp.1804-1820
• /
• 1997

In this paper, an efficient call control procedure is presented for next generation wireless ATM networks and its performance is mathematically analyzed using the open queueing network. This procedure is based on a new scheme called as the cell clustering. When we use the cell clustering scheme, at the time that a mobile connection is admitted to the network, a virtual cell is constructed by choosing a group of neighboring base stations to which the call may probabilistically hand over and by assigning to the call a collection of virtual paths between the base stations. Within a microcell/picocell environment, it is seen that the cell clustering can support effectively a very high rate of handovers, provides very high system capacity, and guarantees a high degree of frequency reuse over the same geographical region without requiring the intervention of the network call control processor each time a handover occurs. But since mobiles, once admitted, are free to roam within the virtual cell, overload condition occurs in which the number of calls to be handled by one base station to exceed that cell site's capacity of radio channel. When an overload condition happens, the quality of service is abruptly degraded. We refer to this as the overload state and in order to quantify the degree of degradation we define two metrics, the probability of overload and the normalized average time spent in the overload state. By using the open network queueing model, we derive closed form expressions for the maximum number of calls that can be admitted into the virtual cell such that the two defined metrics are used as the acceptance criteria for call admission control.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1993.04a
• /
• pp.75-79
• /
• 1993

본 연구에서는 원통형 셀을 Donnell-Mushitari의 Thin Shell로 모델링하고, 유체의 거동은 Hankel 함수를 배제하고 유한차분법(Finite Difference Method)으로 모델링하여, 상태 벡터(State Vector)해석법, 전달 행렬 및 푸리 에 변환(Fourier Transform)을 사용, 무한 원통형 몰수체의 강제 진동을 해 석하였다.