• Applied Chemistry for Engineering
• /
• v.26 no.4
• /
• pp.394-399
• /
• 2015

In this study, the Cu catalyst decorated with activated carbon fibers were prepared for improving $SO_2$ adsorption properties. Flame retardant and heat treatments of Lyocell fibers were carried out to obtain carbon fibers with high yield. The prepared carbon fibers were activated by KOH solution for the high specific surface area and controlled pore size to improve $SO_2$ adsorption properties. Copper nitrate was also used to introduce the Cu catalyst on the activated carbon fibers (ACFs), which can induce various reactions in the process; i) copper nitrate promotes the decomposition reaction of oxygen group on the carbon fiber and ii) oxygen radical is generated by the decomposition of copper oxide and nitrates to promote the activation reaction of carbon fibers. As a result, the micro and meso pores were formed and Cu catalysts evenly distributed on ACFs. By Cu-impregnation process, both the specific surface area and micropore volume of carbon fibers increased over 10% compared to those of ACFs only. Also, this resulted in an increase in $SO_2$ adsorption capacity over 149% than that of using the raw ACF. The improvement in $SO_2$ adsorption properties may be originated from the synergy effect of two properties; (i) the physical adsorption from micro, meso and specific surface area due to the transition metal catalyst effect appeared during Cu-impregnation process and ii) the chemical adsorption of $SO_2$ gas promoted by the Cu catalyst on ACFs.

• Journal of the Korean Wood Science and Technology
• /
• v.34 no.3
• /
• pp.1-7
• /
• 2006

Anatomical and physical properties of kenaf grown in Chuncheon, Korea were investigated using light and scanning electron microscopy and X-ray diffraction method. Bast fiber, phloem ray, cortex parenchyma cell and sieve tube member were observed in phloem, and vessel element, fiber and ray in xylem. Solitary and multiple radial pores in xylem existed. The cell types of ray parenchyma in radial section were procumbent, upright and square cells. The length of bast fiber increased with increasing the growth period. The length of wood fiber was 0.74~0.82 mm, but was not significantly different between the growth period and stem height. Relative crystallinity was 53~74% in phloem and 43~58% in xylem. Cellulose crystallinity width was 2.68~3.24 nm in phloem and 2.46~2.95 nm in xylem. The green moisture content and green density increased but basic density decreased with increasing the stem height.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2011.11a
• /
• pp.48-48
• /
• 2011

국내 염색가공업에 종사하는 중소기업은 약 1,700여개 업체로써, 평균 50억/년 매출을 하고 있으며, 생산의 대부분을 임가공에만 의존하고 있는 실정이다. 이들 염색가공업체들은 섬유제품의 품질 향상 등을 위해 전처리, 염색, 가공이라는 섬유습식공정을 행하게 되는데 그 공정이 따로 분리되어 있어 임가공 업체 입장에서는 시간과 비용 차원에서 비효율적인 면이 존재하여 왔다. 따라서 공정합리화, 원가합리화를 위해 따로 분리되어 있는 위 공정을 통합하려는 시도를 많이 했지만 전처리/염색 공정의 통합에서 일부 성과가 있었을 뿐 효과면에서는 아직 미흡한 실정이다. 또한 가공이란 공정은 그사용 약제의 특수성에 따라 기존 Padding-Drying-Curing이라는 3 step process를 반드시 필요로 하고 있기 때문에 가공 공정의 통합은 시도조차 이루어지지 않고 있는 것이 현실이다. 따라서 염색공정과 가공공정의 통합을 시도하기 위해서는 관련 약제 개발이 출발이라 할 수 있으며 그 첫 대상은 염색 공정의 소핑과 가공공정의 유연처리를 동시에 행할 수 있는 소핑유연제로 선정하려 한다. 즉 셀룰로오스계 섬유의 반응성 염색 후 소핑 공정에서 일액형 소핑유연제, 한가지 제품만을 간편하게 사용해도 소핑효과와 유연효과를 동시에 얻어 후속 유연처리 공정을 생략할 수 있는 것이다. 그렇게 되면 시간적으로나 비용적으로 큰 절감 효과를 가져와 임가공 업체의 부담을 덜어 줄 수 있을 뿐만 아니라 공정 통합을 통해 배출되는 폐수의 양도 상당량 감소시킬 수 있을 것으로 기대된다. 본 연구 결과, 폴리옥시에틸렌 트리데실 에테르 타입의 계면활성제와 개질된 디메틸폴리실록산 계열의 실리콘 오일, 그리고 이들의 상용성을 확보하기 위한 특수 용제 및 첨가제를 최적의 비율로 배합하여 안정한 일액형 복합 소핑유연제를 제조할 수 있었다. 제조된 소핑유연제는 유백색 반투명 액상의 외관을 가지며 pH(10%solution)는 $7{\pm}1$, 고형분은 $13.5{\pm}0.5%$이었다. 이 소핑유연제의 성능 평가결과, 소핑력은 기존의 소핑제와 동등 수준으로 세탁견뢰도 4급이상의 성능을 보였고, 유연성 면에서도 기존의 유연제와 동등 수준으로 평가되었다. 이로써 기존의 분리된 소핑 공정과 유연공정을 개발된 제품을 이용하여 통합할 수 있어 염색현장의 비용절감, 공정단축의 효과를 기대할 수 있게 되었다.

• Korean Journal of Food Science and Technology
• /
• v.39 no.5
• /
• pp.588-592
• /
• 2007

In this study, we evaluated the recovery effects of dietary fiber extracted from soybean hulls on diarrhea in rats. Diarrhea-induced Sprague-Dawley male rats were divided randomly into 4 groups and fed experimental diets for 24 hours. The diets, based on the AIN93G diet, were as follows: CON (control diet), S-COTL (67.2 g/kg soybean cotyledon fiber diet), S-HULL (59.6g/kg soybean hull fiber diet), CHI (55.6g/kg chicory fiber diet). The results showed significant (10-20%) reductions of fecal water content in the CON and S-HULL groups, as compared to the S-COTL and CHI groups. The change in serum osmolality, a measure of dehydration symptoms, was significantly reduced in CON and S-HULL as compared to the S-COTL and CHI groups. Based on the results, it is suggested that soybean hull fiber functions well for diarrhea recovery in rats. Consequently, soybean hull fiber is an important food source that could be used as a medical food in patients suffering from diarrhea.

• Horticultural Science & Technology
• /
• v.28 no.3
• /
• pp.353-362
• /
• 2010

The contents of functional and nutritional components of 13 cultivars of Chinese cabbage (CC, $Brassica$ $rapa$ subspecies $campestris$) were analyzed to compare the effects of soil pH of the greenhouse (pH 6.2) and outdoor (pH 7.6). The CC cultivated on pH 6.2 (CC-6.2) soil contained significantly increased amounts (2-9 fold) of pectin, crude protein, vitamin C and vitamin E compared to the counterpart (CC-7.6). The contents of ash and the minerals (Ca, Fe, Na, and Mn) were also significantly increased in CC-6.2. However, CC-6.2 contained 40-50% lower contents of reducing sugars, cellulose and crude fat than CC-7.6. CC-7.6 contained more glucosinolates, gluconasturtiin (18.33 vs. $1.16nmol{\cdot}g^{-1}$ wet weight) and gluconapin (145 vs. $2nmol{\cdot}g^{-1}$ wet wt), than CC-6.2. In conclusion, CC-6.2 had an improved texture (high pectin and low cellulose) and nutritional value (high in protein, Ca, Fe, vitamin C, and E), whereas the CC-7.6 had better taste (high in reducing sugars) and anticancer functionality (high in glucosinolates).

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2001.11a
• /
• pp.20-20
• /
• 2001

우리나라 제지산업은 화학펼프의 80%를 수입에 의존하고 었으나 고지회수율 및 이용율이 세계적으로 볼 때 매우 높은 환경친화적 산업이다. 고지 재활용 공정 중에 서 가장 핵심적인 공정인 부유부상 공정은 고상계의 표면특성 차이를 이용하여 소수성 의 잉크업자를 기포에 부착시켜 부상을 통하여 제거하는 공정이다. 고지 사용의 고도화 를 위해서는 부유부상 공정의 효율 증대가 절실히 요구되고 있다. 또한 부유부상 공정 의 핵심적인 인자로 부유부상을 통하여 제거되는 고형물질의 표면 특성 특히 소수화도 가 중요하다는 것은 보고된 바 있으나 부유부상에 필요한 표면 특성의 존재 여부와 표 면 에너지와 부유부상 효율의 관계 등에 관한 기본적인 연구가 더욱 필요한 실정이다. 이에 본 연구에서는 부유부상 공정을 기초과학적 측면에서 규명하기 위해 마 이 크로 크리 스탈린 셀룰로오스(Microcrystalline cellulose: MCC)를 모델 물질로 사용하 고 이들의 표면특성을 접촉각 측정을 통하여 평가하였다. 친수성의 표면 특성을 지닌 M MCC의 표면 특성을 소수성으로 바꾸기 위하여 AKD(alkyl ketene dimer)의 함량별로 사이징 처리하여 소수성을 지닌 잉크를 모벨링 하고 친수성 MCC를 염색시약을 이용 하여 흑색으로 염색함으로써 소수화 된 MCC와의 색차를 두어 섬유를 모델링 하였다. 이렇게 제조된 MCC의 소수화 정도를 평가하기 위하여 분말상태인 MCC를 pellet으로 제조하여 각기 다른 표면장력과 표변특성을 지난 용액을 이용하여 Advancing Contact A Angle을 측정하고 다양한 방법으로 이를 분석하여 시료의 표면에너지를 평가하였다 그 리고 부유부상 셀내의 액상의 이온강도와 표면장력 등 화학적인 인자에 의한 부유부상 분리효과를 평가하였다.있었다 (그림 2). 칼렌다는 종이를 높은 전단력과 압축력으로 변형시키는데 비해 도침은 단순히 압축 압력만을 종이에 가하는 것이 다르다고 볼 수 있는데, 라 이너지와 백상지가 같은 조건하에서 왜 이러한 큰 차이를 보이는 이유를 아직 알수 없다.해 동일한 공정 데이터들올 이용하여 보편적으로 사용하는 통계기법 중의 하나인 주성분회귀분석을 실시하였다. 주성분 분석은 여러 개의 반응변수에 대하여 얻어진 다변량 자료의 다차원적인 변 수들을 축소, 요약하는 차원의 단순화와 더불어 서로 상관되어있는 반응변수들 상호간 의 복잡한 구조를 분석하는 기법이다. 본 발표에서는 공정 자료를 활용하여 인공신경망 과 주성분분석을 통해 공정 트러블의 발생에 영향 하는 인자들을 보다 현실적으로 추 정하고, 그 대책을 모색함으로써 이를 최소화할 수 있는 방안을 소개하고자 한다.금 빛 용사 둥과 같은 표면처리를 할 경우임의 소재 표면에 도금 및 용 사에 용이한 재료를 오버레이용접시킨 후 표면처리를 함으로써 보다 고품질의 표면층을 얻기위한 시도가 이루어지고 있다. 따라서 국내, 외의 오버레이 용접기술의 적용현황 및 대표적인 적용사례, 오버레이 용접기술 및 용접재료의 개발현황 둥을 중심으로 살펴봄으로서 아직 국내에서는 널리 알려지지 않은 본 기 술의 활용을 넓이고자 한다. within minimum time from beginning of the shutdown.및 12.36%, $101{\sim}200$일의 경우 12.78% 및 12.44%, 201일 이상의 경우 13.17% 및 11.30%로 201일 이상의 유기의 경우에만 대조구와 삭제 구간에 유의적인(p<0.05) 차이를 나타내었다.는 담수(淡水)에서 10%o의 해수(海水)로 이주된지 14일(日) 이후에 신장(腎臟)에서 수축된

• Journal of the Korean Wood Science and Technology
• /
• v.34 no.6
• /
• pp.44-50
• /
• 2006

To characterize thermo-chemical feature of su gar conversion of woody biomass poplar wood (Populus alba${\times}$glandulosa ) by sub- and supercritical water was treated for 60s under subcritical (23 MPa, 325 and $350^{\circ}C$) and supercritical (23 MPa, 380, 400, and $425^{\circ}C$) conditions, respectively. Among degradation products undegraded poplar wood solids existed in aqueous products. As the treatment temperature increased, the degradation of poplar wood was enhanced and reached up to 83.1% at $425^{\circ}C$. The monomeric sugars derived from fibers of poplar wood by sub- and supercritical treatment were analyzed by high performance anionic exchange chromatography (HPAEC). Under the subcritical temperature ranges, xylan, main hemicellulose component in poplar wood, was preferentially degraded to xylose, while cellulose degradation started at the transition zone between sub and supercritical conditions and was remarkably accelerated at the supercritical condition. The highest yield of monomeric sugars amounts to ca. 7.3% based on air dried wood weight (MC 10%) at $425^{\circ}C$.

• Textile Coloration and Finishing
• /
• v.30 no.2
• /
• pp.117-129
• /
• 2018

Cellulose has been widely applied into various medical fields including scaffolding, tissue engineering and tissue formation. In this study, we manufactured cellulose medical fiber from Styela clava tunics(SCT-CS) and analyzed the tensile strength, elongation at break, fluid uptake and surface morphology. And then, the biocompatibility and toxicity of SCT-CS were measured in Sprague-Dawley(SD) rats after the implantation for 30, 60 and 90 days. The level of tensile strength and fluid uptake were lower in SCT-CS than chromic catgut(CCG), while elongation at break level were maintained the higher in SCT-CS. Also, the roughness with pronounced surface patterns as a result of in vivo degradation was significantly greater in CCG than this of SCT-CS although these levels gradually appeared with time in both groups. After implantation for 90 days, SCT-CS and CCG was successfully implanted around muscle of thigh without any significant immune response. Furthermore, no significant alterations were measured in serum parameters and the specific pathological features induced by most toxic compounds for liver and kidney toxicity. Therefore, these results suggest that SCT-CS showing good biocompatibility and non-toxicity can be successfully prepared from cellulose powder of SCT as well as has the potential for use as a powerful biomaterial for medical sutures.

• Applied Chemistry for Engineering
• /
• v.5 no.2
• /
• pp.345-356
• /
• 1994

Each of the three cationized compounds synthesized previously, poly(OMA-co-DAMA)[PODC], poly(DMA-co-DAMA)[PDDC] and poly(EMA-co-DAMA)[PEDC] was blended with waxes, emulsifiers and cationized fatty carbamide(ODTCC) synthesized in this study for the preparation of some durable softening water-repellenting agents, PODCW, PDDCW and PEDCW. The results of washability, tearing strength, crease recovery and contact angle of the cotton fabrics treated with PODCW, PDDCW and PEDCW with and without textile finishing resin, showed remarkable improvement of the physical properties. Rating of water repellency of cotton fabric treated with PODCW was 80, but those treated with PDDCW and PEDCW were not high enough to use in industry. Proper curing temperature of the synthesized water-repelleting agents was $140^{\circ}C$; proper using concentration was 3wt%; sodium acetate was the best catalyst for water-repellenting agents among the used, and proper concentration was 0.6wt%. From the results of reaction mechanism of cellulosic fiber with water-repellenting agent and washability of the fibers treated with water-repellenting agents the prepared water-repellenting agent proved to be durable. Surface structures of cotton fabrics treated with water-repellenting agent were investigated by SEM.

• Journal of the Korean Wood Science and Technology
• /
• v.46 no.3
• /
• pp.231-240
• /
• 2018

Bamboo is one of the major biomass resources that have many advantages such as fast growing, easy cultivation, short rotation, and a relatively lower price. In this study, the anatomical characteristics of Moso bamboo (Phyllostachys pubescens) by age from one-year-old to five-year-old were examined by optical and scanning electron microscopy. Also, the crystalline properties such as relative crystallinity and crystallite width were investigated by an X-ray diffraction method. In one-year-old bamboo xylem, a few vascular bundles showed missing bundle sheath in near the intercellular space. Moreover, one-year-old bamboo had the shortest fiber length and the smallest values in vessel diameter, width of vascular bundle, and thickness of inner layer. One-year-old bamboo also showed the smallest values in the crystallinity and crystallite width. Near epidermis samples had longer fiber length and greater vascular bundle spacing than near pith samples. Relative crystallinity and crystallite width near the epidermis were also higher than near the pith. This study revealed significant differences in qualitative and quantitative anatomical characteristics between one-year-old and two-year- or more old Moso bamboos. It is concluded that the structural differences by bamboo age can be used to differentiate the characteristics of juvenile and mature bamboo.