• Journal of the Korean Institute of Intelligent Systems
• /
• v.14 no.7
• /
• pp.914-919
• /
• 2004

When the motor is rotating, the torque and rpm are varying as the loads or the driving status connecting through reduction units are changing. On the contrary, one can monitor the changes of the loads or the driving status in the manner of measuring motor torque and rpm. There is a torque measuring method using the strain gauge and bridge circuit. But, because this is the contact method, it has the life time which is dependent on rotating velocity and used time. So this system demands on replacement of some Parts or whole system itself for maintenance. And this system is also relatively big and expensive, requiring preceding annoying process. In this paper, we are going to suppose non-contact method to measure torque and rpm using the Hall effects sensor For this we have made the planetary geared reduction motor with Hall sensors and with the monitoring system. The monitoring system displays the sensing data(torque, rpm) and calculated data( power) and also has the network capability with Bluetooth protocol. Our solution is much more inexpensive ;md simple method to measure torque and rpm than before.

• Journal of the Korea Institute of Building Construction
• /
• v.10 no.4
• /
• pp.105-112
• /
• 2010

The demand for the development of automated construction equipments is gradually increasing to deal with the current problems of construction technology, such as a lack of experienced workers, the aging of engineers, safety issues, etc. In particular, earth work such as excavation is very machine-dependent, and there has been a great deal of research on the development of an intelligent excavator, which involves great safety concerns. Thus, the objective of this study is to develop the technology to enhance the safety of intelligent excavation systems by developing an omnidirectional object detection technology for the intelligent excavator and applying it to a user-friendly system. The existing literature was reviewed, and the function of various sensor technologies was investigated and analyzed. Then, the best laser sensor was selected for an experiment to determine its effectiveness. An omnidirectional object detection algorithm was developed for a user interface program, and this can be used as the fundamental technology for the development of a safety management system for an intelligent excavator.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.10
• /
• pp.1-6
• /
• 2007

Wireless Self-Powered Temperature Sensor for UHF Sensor Tags which are basic device for construction of ubiquitous sensor network is proposed. The key parameters of the target specification are resolution of $0.1\;^{\circ}C$ per output bit, below 1.5 V of operating voltage and below 5 uW of power consumption during sensing operation. Temperature sensor circuit consists of PTAT current generator, band gap reference circuit generating both reference voltage and current, Sigma-Delta Converter, and Digital Counter. Simulated maximum resolution was $0.23\;^{\circ}C/bit$ in 11-bit output. The proposed temperature sensor was fabricated by using a 0.25 m CMOS process. The chip area is $0.32\;{\times}\;0.22\;mm$ and the operating frequency is 2 MHz. Measured resolution from fabricated temperature sensor was $4\;^{\circ}C/bit$ in 8-bit output for the temperature range from $10^{\circ}C$ to $80^{\circ}C$.

• Proceedings of the KIPE Conference
• /
• 2013.11a
• /
• pp.210-211
• /
• 2013

냉동차량은 이동 또는 정차 중에도 냉동 부하에 일정 온도를 유지 시켜야한다. 종전의 상용차량에 냉동시스템은 차량의 엔진과 연계하여 압축기를 구동하거나 엔진과 연계된 발전기의 전력을 이용하여 일정 온도를 유지하였다. 이러한 방식은 제어가 쉽지 않고 효율이 낮은 단점을 가지고 있다. 본 논문에서는 이러한 단점을 개선하고자 냉동차량이 정차 중인 무시동 기관에서도 일정 온도를 유지 할 수 있도록 센서리스 제어방식이 적용된 3상 인버터를 제안하였다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2018.10a
• /
• pp.126-129
• /
• 2018

기존 자율주행자동차의 영상 센서 시스템이 표지판에 약간의 부착물만 붙어도 인식이 되지 않는 점을 고려해 Semi-Passive RFID(Radio-Frequency Identification)기술을 이용한다. 각 표지판마다 소스코드를 설정한 후 RFID 태그를 부착하고 자동차의 룸미러 뒤쪽 중앙에 RFID 리더기를 부착해 원거리에서 태그와 리더기의 작용을 통해 영상 센서 시스템의 취약점을 보완해 오류를 줄인다. 태그의 건전지를 대체하여 M24LR16E칩을 적용한다. 이 칩은 기존에 낭비되는 전파와 폐열, 움직임에 따라 발생하는 동작 에너지의 미세한 에너지를 모아 메모리칩을 구동한다. 또한 GPS를 이용한 위치정보 획득 및 지리적 변화의 낮은 정확도를 보완해 도시 인프라에 부착된 RFID를 제안하여 이를 이용한 위치정보 획득과 처리방안의 문제점도 해결한다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2015.10a
• /
• pp.258-260
• /
• 2015

특수목적 기계 등에 사용되는 시스템은 재난환경에서 환경인지 및 인명탐지, 가시성 확보를 위한 다양한 센서 Network, 목적에 맞는 Actuator 구동기능, 영상신호를 포함한 정보수집/전달과 그에 상응하는 제어 기능을 커버하는 플랫폼 기술이 중요하며, 이 목적을 위해 유무선 조합구성으로 통신의 신뢰성을 높이고, 다양한 센서 네트워크를 구비한 독립모듈 운영을 통해 보다 광범위한 장소를 탐색 정보를 제공하고, 이러한 정보를 이용하여 특수목적용도를 높일 수 있는 특수목적 기계용 제어기 Platform 전반에 관한 연구이다.

• Journal of Navigation and Port Research
• /
• v.36 no.10
• /
• pp.865-871
• /
• 2012

This paper presents an observer to estimate the displacement of hydraulic cylinders of an underwater robot for harbour construction using a pressure sensor. In harbour constructing, we place heavy armour stones weighing over 2~3 tons on the surface of the bank to protect it from storming wave. This work typically done by a diver is difficult and dangerous so that we have developed Stone Diver which is the underwater robot for harbour construction. The robot needs a displacement sensors to control the position of hydraulic cylinders. The position sensors mounted outside the cylinders cause poor durability in construction site where shock and dust usually occur. However, the pressure sensor mounted inside a waterproof box improves the durability. Based on the dynamic parameters and the pressures in the cylinder, the observer estimates the cylinder's position. This paper presents the positional accuracy of the pressure based observer and the performance of the underwater robot to assemble the armour stones.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.10 no.5
• /
• pp.287-291
• /
• 2010

In this paper, we designed and implemented mobile object automatic system based on senor networks for telematics. For developing this system, we gather the various sensing data through wireless communication method using zigbee sensor networks and analyze them in monitoring equipment. And we enable the driver to recognize the car state information on the whole by interfacing analyzed data to telematics unit. And, we implemented automatic controller that can control temperature and humidity in car automatically by actuating air conditioner based on the data that was monitored throughout temperature sensor, humidity sensor and brightness sensor based on sensor networks.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.6
• /
• pp.1036-1043
• /
• 2022

This paper discusses about the development of a visual sensor that can be installed in an automatic mooring device to detect the berthing condition of a vessel. Despite controlling the ship's speed and confirming its location to prevent accidents while berthing a vessel, ship collision occurs at the pier every year, causing great economic and environmental damage. Therefore, it is important to develop a visual system that can quickly obtain the information on the speed and location of the vessel to ensure safety of the berthing vessel. In this study, a visual sensor was developed to observe a ship through an image while berthing, and to properly check the ship's status according to the surrounding environment. To obtain the adequacy of the visual sensor to be developed, the sensor characteristics were analyzed in terms of information provided from the existing sensors, that is, detection range, real-timeness, accuracy, and precision. Based on these analysis data, we developed a 3D visual module that can acquire information on objects in real time by conducting conceptual designs of LiDAR (Light Detection And Ranging) type 3D visual system, driving mechanism, and position and force controller for motion tilting system. Finally, performance evaluation of the control system and scan speed test were executed, and the effectiveness of the developed system was confirmed through experiments.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2021.11a
• /
• pp.756-759
• /
• 2021

본 논문은 기존의 5축 치아가공기나 반도체장비등에 사용하고 있는 회전형 모터의 경우는 엔코더와 리졸버를 사용하고 있다. 엔코더와 레졸버는 고가이므로 실제 산업현장에서 전동기의 위치 센서로는 적용하기가 힘들다. 또한 엔코더와 레졸버와 같은 광학식 위치센서는 그 크기와 내구성에 있어 약점이 있기 때문에 취부 할 때에도 어려움이 있다. 따라서 본 연구에서는 5축치아가공기에 적용하기 위해서 자석가동자를 만들었으며, 이러한 문제점을 해결하는 방안으로 리니어모터를 고정자로 하고 자석플레이트를 이동자로 하는 시스템과 별도의 리니어 스케일을 배제하고 기존의 정현파를 발생하는 2개의 리니어홀센서 및 영구자석을 이용하여 가동자의 절대위치와 이동 위치를 검출할 수 있는 리니어 모터 및 그 제어방법, 안정성 및 신뢰성을 향상시킬 수 있는 자석가동자를 이용하여 구동시 실시간으로 데이터를 확인할 수 있고 제어할 수 있는 모니터링 시스템을 개발하는 연구이다.