• Journal of the Korean Ceramic Society
• /
• v.38 no.7
• /
• pp.634-638
• /
• 2001

본 연구에서는 마이크로 내시경용 바이오 센서로 응용하기 위한 Al/PZT/RuO$_2$로 이루어진 마이크로 캔틸레버를 제작하였으며, 공진 특성 및 병원체의 흡착에 따른 공진 특성 그리고 검출 감도(sensitivity)에 미치는 구조적인 영향을 전산모사를 통하여 알아보았다. 길이 100$mu extrm{m}$, 폭 50$\mu\textrm{m}$, 두께 0.3$\mu\textrm{m}$/0.25$\mu\textrm{m}$/0.7$\mu\textrm{m}$ (Al/PZT/RuO$_2$)의 크기의 제작된 마이크로 캔틸레버는 89kHz의 공진주파수를 가지고 있음을 전산모사를 통해 알 수 있었다. 바이오 센서로 응용될 때의 검출 감도는 흡착 질량의 증가에 비례하여 향상되었으며, 5% 이상의 검출 감도를 갖기 위해서는 흡착 질량이 약 5 나노그램 이상이 되어야 함을 확인할 수 있었다. 캔틸레버의 크기를 결정하는 길이, 폭, 두께중 사용 주파수 대역은 길이의 조절을 통하여 결정할 수 있고, 검출 감도의 향상을 위해서는 가능한 한 두께를 얇게 해야 함을 알 수 있었다. 반면에 폭의 변화는 공진주파수나 검출 감도에 거의 영향을 미치지 않았다.

• 한국정보통신설비학회:학술대회논문집
• /
• 2009.08a
• /
• pp.364-366
• /
• 2009

광 바이오 센서 시스템에서 Trans-Impedance amplifier (TIA)는 광검출기로부터 입력단으로 들어오는 미세한 전기 신호를 원하는 신호레벨까지 증폭하는 역할을 한다. TIA는 광 바이오 센서 시스템의 감도 (sensitivity)를 결정하는 매우 중요한 회로로 저잡음, 저전력, 낮은 입력 임피던스 등의 특성이 요구되어진다. 본 논문에서는 광 바이오 센서 시스템에서 요구되어 지는 저전력, 저잡음 성능을 구현하기 위하여 regulated cascode (RGC) TIA를 설계하였다. 본 연구에서는 기존 common gate (CG) 기법의 TIA에서 전류원 역할을 하는 current source를 저항으로 대체하고, local feedback stage를 이용하는 RGC TIA를 저잡음, 저전력 특성 및 회로 면적 감소의 장점을 갖도록 설계하였다.

• Proceedings of the KIEE Conference
• /
• 2000.07c
• /
• pp.1788-1790
• /
• 2000

본 논문에서는 마이크로 바이오 센서에 응용하기 위한 기초 실험으로서 다공성 실리콘을 이용한 요소 센서의 특성을 고찰하였다. 센서의 감도나 내구성 측면에서 보면 전도성 고분자를 전기중합(electropolymerization)한 후 효소를 전착(electrodeposition)하여 고정화하는 것보다는 PSi 표면에 효소를 코팅한 후 그 위에 고분자를 전기 중합하는 것이 유리하였다. SEM 이미지와 EDX 스펙트럼 분석 결과로부터 urease와 polypyrrole(PPy)이 다공질 실리콘 표면에 코팅되었음을 알 수 있었으며, 요소 농도가 1mM$\sim$1M 영역(일반적인 혈중 요소 농도는 $20{\mu}M{\sim}30{\mu}M$)에서 감도는 $30{\mu}A/decade$ 였다.

• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.11 no.2
• /
• pp.133-141
• /
• 2017

The hybrid acoustic sensor for implantable hearing aid has the structure in which a sound pressure based acoustic sensor (ECM) and a vibration based acceleration sensor are combined. This sensor combines the low frequency sensitivity of an acoustic sensor with the high frequency sensitivity of an acceleration sensor, allowing the acquisition of a wide range of sound from low to high frequency. In this paper, an acceleration sensor for use in a hybrid acoustic sensor has been proposed. The acceleration sensor captures the vibration of the tympanic membrane generated by the acoustic signal. The size of the proposed acceleration sensor was determined to diameter of 3.2 mm considering the anatomical structure of the tympanic membrane and the standard of ECM. In order to make the hybrid acoustic sensor have high sensitivity and wide bandwidth characteristics, the aim of the resonance frequency of the acceleration sensor is to be generated at about 3.5 kHz. The membrane of the acceleration sensor derives geometric structure through mathematical model and finite element analysis. Based on the analysis results, the membrane was implemented through a chemical etching process. In order to verify the frequency characteristics of the implemented membrane, vibration measurement experiment using external force was performed. The experiment results showed mechanical resonance of the membrane occurred at 3.4 kHz. Therefore, it is considered that the proposed acceleration sensor can be utilized for a hybrid acoustic sensor.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.2
• /
• pp.161-166
• /
• 2014

This Electromagnetic metal piece detection sensor, having high sensitivity even under high humidity and dust density, using LVDT was investigated. Metal detection characteristics using phase detection method, for 3 frequencies covering ELF and LF band, were experimentally measured. It was found that the sensitivity for metal and animal food, in which metal piece was included, was exponentially increased as frequency increased. Reducing cutoff frequency of LPF after PD was found to be effective to proportionally increase sensitivity. Also the sensitivity of metal piece detection was enhanced by optimizing BPF bandwidth and SNR. Metal piece detection limit using available ferrous test samples was found to be 0.7mm diameter from the experiment using 50kHz, in ELF band, which was known to have better selectivity to animal food. is an example of ABSTRACT format.

• Journal of Sensor Science and Technology
• /
• v.5 no.6
• /
• pp.7-14
• /
• 1996

In order to develop gas sensor operating at low temperature, thick film $Co_{3}O_{4}$ sensor was fabricated. $Co_{3}O_{4}$ powder was prepared by precipitation from cobalt nitrate solution and the powders containing ethylene glycol as a binder was screen-printed on alumina substrate. Characteristics of sensitivity, response time, and recovery were investigated in terms of binder content and heat treating conditions. The $Co_{3}O_{4}$ sensor contained 15% ethylene glycol and heat-treated at $300^{\circ}C$ for 24hr showed the highest sensitivity at the operating temperature of $250^{\circ}C$. Its sensitivity of 1.1 to 5000ppm butane gas was very high, as compared with $0.8{\sim}0.85$ at the operating temperature of $350{\sim}400^{\circ}C$ for a commercial $SnO_{2}$ gas sensor. It is found that response time was fast, but recovery was poor for the sensor.

• Proceedings of the Optical Society of Korea Conference
• /
• 2003.07a
• /
• pp.196-197
• /
• 2003

광섬유형 센서는 전자기적 간섭에 강하고 높은 감도와 원거리 측정 등의 장점뿐만 아니라 낮은 삽입 손실, 높은 기계적인 신뢰성, 원거리 측정과 같은 장점을 가지고 있어 광통신 기술뿐 아니라 기초과학및 응용 과학분야의 계측에 활발히 이용되고 있다. 온도센서의 경우 센서의 재료가 온도에 견디는 정도에 따라 측정범위가 좌우되므로 광섬유형 센서의 경우 넓은 온도범위에서 측정이 가능하며 다양한 구조의 센서구현이 용이하다. (중략)

• Defense and Technology
• /
• no.6 s.160
• /
• pp.48-53
• /
• 1992

레이다 센서를 선진국 수준으로 개발하지 않으면 국방을 포기하는 것과 같기 때문에, 미래 국제사회에서 한 민족과 국가가 생존하려면 반드시 극복해야할 국방기술의 하나인 레이다 센서에 대하여 감당하기 어렵고 무모할 정도의 투자와 함께, 레이다 관련 종사자들의 피나는 노력만이 선진국과의 격차를 줄이는 길이다

• Journal of Sensor Science and Technology
• /
• v.10 no.4
• /
• pp.214-221
• /
• 2001

The use of an asymmetric Mach-Zehnder interferometric amplitude modulator to measure a relatively low frequency electric field strength is described. The sensitivity of an electric field sensor using a $Ti:LiMbO_3$ optical modulator is strongly affected by the shape of a electrode(probe antenna). To measure the low frequency electric field, a probe antenna of wide effective area is more useful than the usual dipole antenna. As a proof of this, the optical modulator was fabricated with a plate-type probe antenna and the usefulness of this antenna tested for measuring low frequency electric field strength. Measurements were performed in the range 0.1 V/cm to 60 V/cm at 60Hz through 100 kHz. Using a probe antenna of $10\;mm{\times}10\;mm$, the output voltage of $10^{-2}\;mV$ was measured with respect to the electric field strength of 0.1 V/cm at 60 Hz. By increasing the effective area of the probe antenna, better sensitivity is obtainable over the measured range.

• Korean Journal of Optics and Photonics
• /
• v.20 no.2
• /
• pp.71-75
• /
• 2009

A compact electric field probe sensor incorporating two different electro-optic materials of $LiNbO_3$ and GaAs was proposed and fabricated, and it was used to measure the strength of the horizontal and vertical fields generated by a microstrip ring-resonator filter. The sensitivities of the sensors in $LiNbO_3$ and GaAs were $9.315{\mu}V/\sqrt{Hz}$ and ${\sim}49.346{\mu}V/\sqrt{Hz}$ respectively, and their signal to noise ratios were approximately ${\sim}50\;dB$ and ${\sim}40\;dB$ respectively. And the operating frequency range was up to ${\sim}1.2\;GHz$. The electric field profile for the test circuit was scanned and found to be in good agreement with that obtained by using the HFSS simulation.