• Journal of the Korean Society of Clothing and Textiles
• /
• v.29 no.12 s.148
• /
• pp.1619-1626
• /
• 2005

The durability of a stretch fabric is mainly related to the change in the dimension and mechanical properties of elastomeric fibers during wearing and washing. In this study, we examined the effects of washing temperature, presoaking time and the number of washing cycles on the change in length, tenacity, elongation at break, and permanent elongation after six repeated cycles of $100\%$ extension and relaxation of spandex yams with varying fineness and with a different rate of extension during heat-set. The spandex yarns continued to shrink as the wash temperature and the number of wash cycles increased. In addition, the finer spandex yams decreased in length more than the thicker yams. The increase in temperature and presoaking time tended to cause a slight decrease in the tenacity and elongation at break of the spandex yarns. Permanent elongation of the spandex yams also increased as the temperature, presoaking time and the number of washing cycles increased. Moreover, an extended presoaking time followed by washing at $40\%$ like repeated washing cycles showed the great increase in the permanent elongation of spandex yams. The thinner spandex yin had a better elasticity than the thicker one, since the former had a lower permanent elongation percentage than the latter. Based on the DSC thermograms, the melting points of the spandex yarns after washing were almost the same as those of the spandex yarns before washing.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.32 no.6
• /
• pp.947-958
• /
• 2008

To study the effect of a washing machine with silver nano technology on its detergency, the discoloring of the dyed clothes and the staining of standards adjacent fabrics were examined. As the laundry specimen, cotton fabric dyed with reactive dyes and Polyester fabric dyed with disperse dyes were chosen; and as the adjacent fabrics, undyed cotton. polyester and nylon fabrics were chosen. The colorfastness was evaluated after washing under conditions that those washing temperature, liquor ratio, detergency concentration and the type of water were varied. When the clothes were washed with the tap water contains silver ion, the deposition of silver compounds into the washed clothes was measured. As a results, after the washing in the various conditions, discoloring of the dyed clothes was not intense. The higher the washing temperature and the lower the liquor ratio, the larger the staining appeared on the white fabrics; especially for the white nylon fabrics. The concentration of detergent and the type of water affected hardly the colorfastness. After the repeated washing with the water contains silver, whiteness of the cotton and the nylon fabrics were lower than the result after the washing with the tap water, and a quantity of silver ions was found on the washed clothes.

• Fashion & Textile Research Journal
• /
• v.22 no.4
• /
• pp.534-539
• /
• 2020

Experimental research is needed to provide information on the removal of bloodstains since washing clothes contaminated with blood is necessary for medical related fields (such as ambulance workers and doctors) as well as for women of childbearing age. This study investigated efficient washing conditions for the removal of bloodstains with a focus on washing temperature, fiber type and blood ageing time. Polyester/cotton fabric showed the highest detergency from among three fabrics that were influenced by the composition of the fiber and the structure of the yarn and fabric. When examining the effect of detergent, it was concluded that the alkalinity over pH 10 was essential to remove bloodstains and that auxiliary agents such as soil antiredeposition agents and bleach had a significant effect on the removal of bloodstains. Washing temperature showed the highest detergency at 20℃ due to the activity of the enzyme without the denaturalization of blood. Blood-ageing influenced detergency by inducing changes in the adsorption area and chemical bond. A combination of methods such as quick removal after contamination, use of alkaline detergents including soil antiredeposition agents and bleach, and low-temperature washing could help remove bloodstains.

• Journal of Korea Society of Industrial Information Systems
• /
• v.23 no.3
• /
• pp.25-34
• /
• 2018

This paper presents a heating source of carbon nanofibers for the efficiency and the drying performance of laundry dryer, and focuses on the applicability-evaluation of its source. To design the proposed heating module, experiments were conducted in terms of surface temperature and surface temperature distribution characteristics of carbon nanofiber lamps. The surface temperature of the lamps increased linearly with increment of a current to flow a lamp and revealing the increasing pattern as the length of the ramps is shorter. The proposed heating source was evaluated based on drying efficiency, moisture evaporation rate at laundry, and internal temperature of a drum during drying process. The drying efficiency satisfied a 45% which is specified in KS C 9319. The moisture evaporation rate and the internal temperature of the drum were respectively 98.88% and $61.1^{\circ}C$, which are similar to that of S's company dryer. From the evaluation and actual drying test results, the proposed carbon nanofiber lamp heating module is considered to be applicable as a heat source for laundry dryer in terms of drying efficiency and drying performance. it is possible to obtain a heat source at a high temperature, an excellent calorific value, an improvement in drying performance, and an effect of sterilizing laundry due to the emission of far-infrared rays. In addition to the applicability, the difference of the drying efficiency between the dryers was analyzed in detail based on the power consumption of the heat sources.

• Fire Science and Engineering
• /
• v.27 no.1
• /
• pp.39-45
• /
• 2013

This study analyzes the explosion hazard of dry cleaning solvent recovery machine in laundry shop in two aspects, i.e. combustible and ignition source, and determines the explosive conditions of this machine by conducting mockup explosion tests repeatedly, varying conditions and using real dry cleaning solvent recovery machines. As to combustibles, two kinds of combustibles used widely in Korea have been selected and tested. The flash points, LEL's, and saturation vapor pressures of those combustibles have been measured, and their explosion specific curves have been drawn, based on the results of the measurements, so that the explosion risks of those materials may be determined, depending on the temperatures. Potential voltages generated from materials for laundry and foreign materials of metals have been assumed to be the ignition sources in this application, and their potential voltages have been measured, depending on temperature, humidity, and antistatic agent, by using real materials for laundry and a potential voltage measuring device. Tests have been conducted, varying the quantities, concentrations, and operating temperatures of materials for laundry. As a result, explosions have not been generated with potential voltages of materials for laundry, but explosions have been observed when applying artificial spark energy of 2.0 mJ.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.27 no.12
• /
• pp.1368-1373
• /
• 2003

본 연구에서는 견직물에 강경한 촉감을 부여하여 한복지 뿐만 아니라 현대의 패션경향에도 부합되는 소재를 개발하고자 하였다. 견직물에 강경성을 부여하기 위하여 의마가공용 폴리우레탄 수지를 이용하여 수지농도와 큐어링온도에 따른 수지부착율을 조사하였고, 여기에 수반되는 물리적 특성의 변화를 살펴보았다. 또한 가공된 견직물의 세탁에 대한 내구성도 살펴보아 동시에 실용가능성도 검토하였다. 이상의 연구를 통해 다음과 같은 결과를 얻었다. 1. 의마가공용 폴리우레탄 수지를 견직물에 처리할 경우 수지 농도가 증가할수록 수지 부착량이 증가하였다. 2. 열처리온도를 변화시켜 수지부착량의 변화를 살펴본 결과 열처리 온도가 증가할수록 수지의 부착량이 감소하여 본 실험에 사용된 수지의 적정 열처리 온도가 160-18$0^{\circ}C$인 것을 고려해 볼 때 견직물의 경우 17$0^{\circ}C$의 열처리 온도가 적절한 것으로 나타났다. 3. 수지 처리된 견직물의 역학적 특성치의 변화를 살펴본 결과 RT, EM, MIU값은 감소하는 경향을 가지며, LT, B, 2HB, G, 2HG, 2HG5값은 증가하는 경향을 나타내어 폴리우레탄 수지처리로 의마가공 효과를 갖는 견직물을 얻을 수 있었다. 4. 수지 처리된 견직물의 역학적 특성치는 물세탁 후에도 크게 변화가 없어 세탁에 대한 내구성을 지니고 있는 것으로 나타났다.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.34 no.11
• /
• pp.1798-1811
• /
• 2010

This research evaluates the changes in the comfort-related properties of high-density fabric, such as moisture permeability and waterproofness, in order to assess the relative importance of laundry conditions for clothing properties after repeated laundering and suggest the best laundering conditions for high-density fabric through the identification of the most influential factor. A commercial high-density fabric was washed 25 times in a drum-type washer using nine different laundry conditions based on profiles derived from a fractional factorial design. To evaluate the changes in the comfort-related properties of the fabric, pore size, air permeability, water vapor transport, water repellency, and water resistance were measured. The comfort-related properties of the fabric deteriorated after repeated laundering by the damaged surface finish; in addition, the damaged surface also changed the pore size. As a result, the water repellency and water resistance decreased. The detergent was the most responsible factor to change the properties among the four factors of detergent, hardness, temperature, and RPM. The best laundering conditions for the fabric was a neutral detergent, soft water of 70ppm, a temperature of $15^{\circ}C$, and 30rpm.

• Human Ecology Research
• /
• v.56 no.5
• /
• pp.417-424
• /
• 2018

The use stage of a textile product impacts sustainability more significantly than other stages of the product's life cycle due to repeated washing and drying. This study determines efficient washing conditions, with high detergency, to reduce energy consumption from excessive washing and improve the washing process sustainability. Detergency was measured at various washing temperatures ($20^{\circ}C$, $40^{\circ}C$, and $60^{\circ}C$) and time (10 min, 20 min, and 30 min) using standardized soiled fabrics, i.e., 100% cotton, polyester/cotton (65%/35%), and 100% polyester woven fabric soiled with pigment/sebum, carbon black/mineral oil, soot/mineral oil, cocoa, blood, and red wine. Detergency at the washing condition of $20^{\circ}C$ and 30 min was higher than that at $40^{\circ}C$ and 10 min. In addition, detergency at the condition of $40^{\circ}C$ and 30 min was also higher than that at $60^{\circ}C$ and 10 minutes. This may be because a reduced washing effect at low washing temperatures was complemented by increased mechanical action over a long time. Further, washing temperature and time, with the same detergency, differed based on the type of fiber and soil. Also, the influence of a detergent on the detergency depends on the type of soil. The results suggest that energy and detergent have been consumed more than necessary in actual laundry. According to each type of fiber and soil, washing conditions designed to reduce the energy consumption of the washing process while maintaining the same detergency, were determined.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2012.03a
• /
• pp.43-43
• /
• 2012

본 연구에서는 대량으로 손쉽게 구 할 수 있는 식물염료를 확보하여 새로운 천연색소자원을 탐색하기 위해서 진행되었으며, 시료의 최적 추출 조건을 확립하고 추출된 색소의 실크에 대한 염색 특성을 살펴 최적 염색조건을 설정하고, 염색견뢰도를 평가하여 수수 등겨 추출물의 천연색소로의 활용에 대한 기초 자료를 마련하고자 하였다. 수수 색소 추출 시 생산성과 편리성을 고려하여 추출은 pH 4, 추출온도 $60^{\circ}C$, 추출시간 24시간이 적정조건으로 제시되었으며, 수수 추출물에 함유되어 있는 탄닌의 최대흡수파장은 282nm로 나타났다. 견직물의 pH에 따른 염색 특성은 pH가 증가할수록 K/S값이 증가하여 염착량이 증가하였으며, 염색온도가 높을수록 염색시간이 길어질수록 염착량이 증가하는 경향을 보여주고 있다, 염색온도가 높을수록 염색시간이 경과될수록 색상은 $Y{\rightarrow}YR$로 변화되는 것을 알 수 있었으며 염색온도가 높을수록 채도가 증가하였다. 욕비가 클수록 염착량은 감소하였으나, 채도는 약간 증가하는 것을 알 수 있었다. 매염제 처리에 의한 색상변화에서는 Al, Ni 매염은 색상변화는 적었지만, Cu와 Fe 매염은 명도와 채도를 크게 감소시키고 아울러 색상도 Cu는 적갈색으로 Fe는 진회색으로 변화되었다. Sn과 Ti 매염에 의해서 명도는 약간 감소하고 채도는 약간 상승하여 연한 주황색으로 색상이 변화하였다. 설정된 조건에서 염색된 염색포의 일광견뢰도는 2~3급, 세탁견뢰도 변퇴색은 2~3급, 오염은 4~5급으로 나타났다. Fe로 매염된 염색포의 일광견뢰도는 증가하여 3~4급으로 나타났으며, 매염제 처리에 의한 세탁 견뢰도는 같거나 약간 증가되는 것으로 나타났다.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2012.03a
• /
• pp.42-42
• /
• 2012

팥에 함유되어있는 색소와 관련된 연구 중에서는, 검정팥의 색소성분을 분리하여 delphinidin-3-glucoside(D-3-G)로 보고한 Sasanuma의 연구와 검정팥 껍질속에 포함된 안토시아닌의 함량을 평가한 Yoshida의 연구 결과 등이 있다. 본 연구에서는 검정팥 종피에서 색소를 추출하여, 적정 염색조건을 설정하였으며, 매염제별 색상변화 및 견뢰도를 측정하는 과정을 통해 염색 특성을 파악하여 새로운 천연염재로서의 활용 가능성을 진단하였을 뿐만 아니라 응용 연구를 위한 기초자료의 확보에 주안점을 두었다. pH에 따른 염색성에서는 견직물의 경우 pH 4에서 가장 염착량이 많았고, 면직물의 경우에는 주어진 범위내에서는 pH가 높을수록 염착량이 많았다. 염색온도와 시간에 따른 염색성은, 견직물의 경우, 염색온도 $80^{\circ}C$에서는 시간이 경과할수록 K/S 값이 크게 나타났으며, 면직물의 경우도 견직물과 비슷한 결과로 온도가 높아질수록 염색시간이 경과될수록 K/S 값이 크게 나타났다. 견직물에 대한 매염제 종류별 표면색의 변화에서는 Fe 매염포만 $YR{\rightarrow}Y$ 로 변화되었을 뿐 다른 매염제에서는 매염 후에도 색상 변화는 크지 않았다. 매염처리 전 견직물의 일광 견뢰도는 무매염이 4~6등급, Al 처리포는 4~5등급, Cu와 Sn은 3~4등급으로 나타났고 Fe는 2~3등급으로 가장 낮게 나타났으며, 세탁견뢰도에서는 무매염 2등급, 매염제 처리의 경우 2~3등급으로 나타났다. 무매염 면직물의 일광견뢰도는 1~2 등급, Fe 매염은 2~3등급, Cu 2등급 Al과 Sn은 1~2등급으로 매염처리에 의해 전혀 개선되지 않았으며, 세탁견뢰도의 경우 Cu매염이 4등급으로 양호하게 나타났으며 무매염, Al, Sn과 Fe는 3등급으로 나타났다.