• Transactions of the Korean Society of Mechanical Engineers
• /
• v.12 no.2
• /
• pp.308-318
• /
• 1988

The liquid disintegration and characteristics of atomization through the swirl nozzle is affected by injection pressure and injection time when the liquid is injected intermittently. These transient phenomena are investigated by electronic controlled-fuel injection nozzle. The effect of injection conditions on disintegration of liquid injected through nozzle is observed photographically by using delay circuit. Droplet size of the element of the sample is measured by the liquid immersion sampling technique. SMD of droplets is varied with time and is decreased as the injection pressure increases. As the injection pressure increases, the maximum diameter of droplet and diameter of droplet which has the maximum droplet number decrease. Spray angle is not affected on injection pressure and change of spray angle with time is associated with needle movement.

• Journal of the Korean Society for Railway
• /
• v.11 no.4
• /
• pp.384-389
• /
• 2008

The ballast, one of track components, plays an essential role as intermedium in transmitting train load to subgrade safely, and the deterioration of ballast directly effects the growth of track irregularity. In this study, we determined the main factor of ballast deterioration was miniature of ballast gravel caused MTT (Multiple Tie Tamper) works and accumulated traffic loads. To estimate the deterioration characteristics of ballast, we carried out field test (Chap.2) through track construction for test and the model test (Chap.3) simulating the actual operation environment, have done a comparative analysis with the sample's result (crushing rate) of high-speed railroad running actually.

• Journal of the Korean earth science society
• /
• v.22 no.4
• /
• pp.301-316
• /
• 2001

To consider the vertical variations of sedimentary environments and geochemical characters in the core sediments in Naju-Yeongam area od the lower part of Yeongsan River, grain-size and metal components of the sediments were analyzed. The sediments are pebble to mud and show fining upward. The core sediments are poorly to very poorly sorted and positively skewed. On the basis of grain size distributions, the sediments of the study areas were thought to have been deposited in a meandering stream. The metallic contents of sediments were presumably controlled by carbonate contents of sediments and weakly controlled by fining upward grain size distribution pattern. Enrichment factors indicating metal concentration in the sediments did not suggest any meaningful concentrations for metallic elements.

• Journal of Soil and Groundwater Environment
• /
• v.11 no.1
• /
• pp.37-44
• /
• 2006

This study summarizes advantages and disadvantages of numerical methods and compares ELLAM and LEZOOMPC to develop an efficient numerical modeling technique on contaminant transport. Eulerian-Lagrangian method and Eulerian method are commonly used numerical techniques. However Eulerian-Lagrangian method does not conserve mass globally and fails to treat boundary in a straightforward manner. Also, Eulerian method has restrictions on the size of Courant number and mesh Peclet number because of time truncation error. ELLAM (Eulerian Lagrangian Localized Adjoint Method) which has been popularly used for past 10 years in numerical modeling, is known for overcoming these numerical problems of Eulerian-Lagrangian method and Eulerian method. However, this study investigates advantages and disadvantages of ELLAM and suggests a change for the better. To figure out the disadvantages of ELLAM, the results of ELLAM, LEZOOMPC (Lagrangian-Eulerian ZOOMing Peak and valley Capturing), and visual MODFLOW are compared for four examples having different mesh Peclet numbers. The result of ELLAM generates numerical oscillation at infinite of mesh Peclet number, but that of LEZOOMPC yields accurate simulations. The simulation results suggest that the numerical error of ELLAM could be alleviated by adopting some schemes in LEZOOMPC. In other words, the numerical model which combines ELLAM with backward particle tracking, forward particle tracking, adaptively local zooming, and peak/valley capturing of LEZOOMPC can be developed for not only overcoming the numerical error of ELLAM, but also keeping the numerical advantage of ELLAM.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.1985-1990
• /
• 2008

1970년대 이후의 고도경제성장기에 치수대책과 동시에 건설골재로서 하상이 굴착된 하천이 많으며, 국가하천 지정구간외에서는 평균하상고가 1.0m 이상 저하한 하천구간도 많다. 또한 국가하천은 상류의 사방공사나 댐건설에 의한 영향이 복합적으로 하도에 나타나고 있어 하상굴착이 하도특성에 어떤 영향을 미치는가를 실증적(實證的)으로 검증하는 것은 어려운 과제이다. 하천에서의 골재채취는 제방부의 침식에 의한 호안파괴, 하상저하에 따른 교량이나 취수보 등 구조물의 기초 노출이 치수적인 문제를 야기할 뿐만 아니라, 단시간내에 하도의 지형구조를 급격하게 변화시켜 여울 소의 하상구조 교란이나 수중 및 하천변의 서식처 파괴 등으로 하천의 물리적 환경에 큰 영향을 미침으로써 생태계를 교란하거나 파괴하는 결과를 초래하게 된다. 본 연구에서는 골재채취로 인하여 교란된 하천의 복원 및 적응관리 계획수립의 전단계에 필요한 교란평가기법을 개발하기 위하여 황강, 남강 및 감천을 대상으로 하여 대조구간과 교란구간을 선정하고 조사 분석하였다. 하천골재 채취가 없거나 경미한 대조구간에서는 홍수량이 변하지 않으면 terrace 모양의 하안부 재료가 하상재료와 거의 같기 때문에 홍수가 있으면 침식된 원래의 하폭으로 회복되는 방향으로 변하지는 않는 경향이 나타났다. 반면에 골재채취가 많은 경우 큰 홍수시의 저수로부의 수심을 증가시키기 때문에 수충부 등의 최심하상고가 크게 되는 경향이 있었으며, 고수부는 침수되는 빈도와 수심이 감소하기 때문에 토사의 퇴적속도(고수부의 상승속도)의 감소, 퇴적물의 세립화 경향이 나타나서 모래, 실트가 퇴적하지 않는 고수부상에 모래, 실트가 퇴적되는 경우가 있고, 반대로 고수부의 퇴적속도가 상승하는 경우도 있었다. 골재채취로 횡단방향의 평탄화가 초래되어 여울 소의 하상구조가 교란됨과 동시에 구간별로 종단경사가 완만해지며, 대부분 교량부에 하상유지공을 설치해야 할 정도로 하상경사가 급변하는 구간이 다수 조사되었다. 또한 선행연구에서 개발된 하상서식환경, 하상재료, 유속/수심상황, 유사퇴적, 하도흐름상태, 하도개수, 여울출현 빈도, 하안 안정성, 식생피복 및 하반림 등 10개의 교란평가항목을 적용하여 대조구간과 비교 평가하였다.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.27 no.2
• /
• pp.200-214
• /
• 1994

In order to clarify the benthic environmental properties as a part of a study on the macrobenthic community in the Chinhae Bay System, water temperature, salinity and dissolved oxygen (DO) in surface and bottom water layers, mean grain size (${\phi}$) and sediment organic carborn (SOC) in surface sediment were analyzed at twelve stations during the period from June 1987 to May 1990. A high sediment organic carbon and hypoxic condition in bottom water due to the development of summer stratification and fine sediment texture toward the inner bay were important environmental characteristics of Chinhae Bay. Hypoxic conditions began to develop in the inner bay from May, and gradually spread toward the outer bay in summer with a peak in September when half the bay was affected by this oxygen deficiency. Recovery from this hypoxic condition in the bottom layer was observed from the beginning of autumn together with a disappearance of the summer stratification. Principal component analyses were carried out from the following five environmental variables:mean water temperature, salinity, dissolved oxygen in the bottom layer and mean grain size, sediment organic carbon in surface sediment. The twelve stations were classified into four areal groups based on the analyses. The division of the areal groups had high correlations to the sediment organic carbon content.

• Journal of the Korean Geotechnical Society
• /
• v.32 no.12
• /
• pp.23-32
• /
• 2016

A single particle crushing test was carried out for recycled aggregates from waste concrete while demolishing various structures. When the recycled aggregates were used for backfill or road subbase materials, load-displacement and crushing characteristics were analyzed. The recycled aggregates with hydrates and aggregates were sorted into 40 mm size (75-40 mm) and 20 mm size (40-20 mm). At initial loading, their irregular surface was closed to and then crushed by loading plate. Such first crushing stage was called 'Surface crushing'. Further loading, some hydrate was crushed and detached from aggregate, and such process repeated several times. This state is called 'hydrate crushing'. The final state is called 'aggregate crushing' in which aggregate crushed and following load suddenly dropped down. As the load increased, such crushing cycle is repeated several times. The shapes of aggregates are round or square, and triangle or long shaped. Depending on their shapes and surface conditions, they crushed in different ways. The 63% of aggregates showed more than 50% load reduction due to aggregate crushing. The 90% load reduction occurred at 15% of aggregates. The 40 mm aggregate crushed at maximum load between 3.05-4.38 kN and 70% of crushed aggregates were less than 20 mm.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.2 no.1
• /
• pp.8-13
• /
• 1997

The Holocene mud deposits in the southeastern innershelf of the Korean Peninsula were studied using the shallow seismic reflection profiles coupled with sediment sampling. The Holocene mud deposits are developed as a belt in the innershelf area from the mouth of the Nakdong River to off Pohang along the coastline. The surficial sediments in the study area gradually become finer and well sorted from south to north. The seismic facies in the Holocene sequence change northward from parallel reflectors in the mouth of the Nakdong River and northeastward prograding reflectors in the southern part off Ulsan to transparent layer in the nearshore off Ulsan to Pohang. The regional difference of seismic facies indicates that the Holocene sediment characters are varied with localities. By combining the surficial sediments properties with seismic facies patterns, the suspended sediments mostly supplied from the Nakdong River may be transported northward along the shore by the north-flowing Tsushima warm current. The Holocene mud sequence overlying the ravinement surface which is produced by erosion of underlying sediments during a rapid transgression can be interpreted as the highstand system tracts probably formed during the highstand of sea level similar to the present-day sea level.

• Journal of The Geomorphological Association of Korea
• /
• v.17 no.1
• /
• pp.15-27
• /
• 2010

This study investigated the sedimentary environment changes in the Baramarae beach of Anmyeondo through spatio-temporal surface sediment analysis. In the winter season 2009, surface sediments were classified into 7 sedimentary facies such as gravel, sand, gravelly sand, gravelly muddy sand, muddy sand, silty sand, and sandy silt. Time-series analysis of average grain size from 2002 to 2009 revealed that the average grain size of sediments became finer and sorting was much worse. On the contrary, during the same period, the grain size became coarsening-trend and sorting was much better in beach area. These different grain size patterns resulted from the different change characteristics of beach and tidal flats. The southwestern beach area was connected to the open sea and thus fine sediments were removed by the environments with relatively high-energy. The sedimentation of fine sediments in the bay resulted from the tidal current action and the reduction of energy by the topographic effects. Fine sediments in the outer part of southwestern tidal flats could be explained such that the Seomot isle blocked ocean waves and as a result, low-energy environments accelerated sedimentations of fine sediments.

• Journal of the Korean association of regional geographers
• /
• v.13 no.4
• /
• pp.409-421
• /
• 2007

The purpose of this paper is to consider the formation processes and depositional conditions of bars formed at the upper-stream part of Sayeon Dam since Sayeon Dam construction in 1964. Results of analyzing the shape characteristics of bars and their sediment grain size distribution are as follow: Firstly, bars are able to categorized as subaqueous bars (A, B), mid-channel bars(C, D), and tributary side-bars(E). Secondly, the outline of bars has longish along the flow path, and their height lowers more and more going towards downstream. Also the height of bar surface tend to heighten from flow path to mountain slope. However, the near part of A is comparatively higher than its distant part, A is defined as a subaqueous natural levee and back swamp. Thirdly, the average particle size of A and B become smaller toward mountain slope. In transportation style, ratio of suspended load become higher toward mountain slope. Fourthly, sorting is worse to very worse according with lake's random changable water level. Fifthly, bar A and B were formed by vertical sedimentation of sediments according as sediments transported along flow path in the subaqueous conditions were spreaded out of flow path. C and D were formed by bed load as flood level lowered. And E was formed by vertical sedimentation while stream flow stopped in tributary's mouth areas with the water level heightening.