• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1992.04a
• /
• pp.94-98
• /
• 1992

낮은 점도를 갖는 단위체(monomer)나 반응성이 있는 올리고머(oligomer)를 이용한 생산속도가빠른 반응사출성형(reaction injection molding)은 일반적인 열가소성 고분자 재료의 사출성형(thermoplastic modding)에 비하여 기계 설비비용을 상당 히 감소시킬 수 있는 장점을 갖으며, 매우 크고 복잡한 형태의 제품을 가공하기가 용이하고, 특히짧은 가공주기(cycle time) 에 부합하는 금형 내에서의 빠른 종합반응이 특징이다. 본 연구는 반응사출성형용 폴리우레탄을 이용한 미세포 포옴의 가공 시 초음파 가진의 영향에대한 이론적 해석과 반응사출 성형을 모사할 수 있는 실험장치에의해 가공되어지는 시편의 파단면을 전자주사현미경에 의해 관찰함으로써 기포의 크기를 조절할 수 있는 가능성에 대한 고찰이 목적이다.

• Proceedings of the KAIS Fall Conference
• /
• 2005.05a
• /
• pp.303-305
• /
• 2005

내부 순환형 회분식 반응기에서 $UV/TiO_2$ 시스템을 이용하여 기상의 휘발성유기 화합물 제거 반응 특성을 온도와 농도 및 자외선 파장 및 광도에 대하여 고찰하였다. 또한 광촉매에 Pt, Pd 등의 첨가에 의한 반응성의 상승을 고찰하였다. 온도에 다른 연구결과 반응온도보다 온도에 의한 흡착특성에 따른 영향을 더 크게 받는 것으로 나타났다. 또한 일부의 반응에서는 수분에 의하여 반응성이 증가하는 것으로 나타났다.

• Journal of the Korean Chemical Society
• /
• v.45 no.3
• /
• pp.207-212
• /
• 2001

DFT calculations have been performed on several substituted 1,4-diaza-1,3-butadienes (1,4-DABs) with electron donating and withdrawing groups at the terminal two nitrogens to investigate the reactivity of Diels-Alder reaction with acrolein. The calculated FMO (Frontier Molecular Orbital) energies for the optimized 1,4-disubstituted-1,4-DABs have been used to explain both normal and inverse electron demand Diels-Alder reactions. It is shown that the electron donating and withdrawing substituents lead to the normal(HOMO diene controlled) and inverse electron demand (LUMO diene controlled) Diels-Alder reactions, respectively.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 1994.11a
• /
• pp.97-100
• /
• 1994

산화구리가 담지된 알루미나 흡수제/촉매를 이용하여 유황산화물과 질소산화물의 제거반응 특성을 고정층 반응기를 이용하여 고찰하였다. 반응온도가 증가할 수록 $350^{\circ}C$까지 탈질 효율이 증가하였으며 그 이상의 온도에서는 암모니아의 산화에 의하여 탈질효율이 감소하였다. 암모니아의 $NO_{x}$ 선택성은 $SO_{x}$ 가 존재하지 않는 경우에 $NH_3/NO_{x}$mole 비 1.0 까지 유지되었으나 $SO_{x}$ 가 존재하면 선택성은 매우 감소하였다. 동시제거 반응의 경우 $400^{\circ}C$ 이상에서 효과적이었으며 $350^{\circ}C$ 이하에서는 암모늄 염의 생성으로 인하여 탈질효율의 감소가 반응시간이 증가함에 따라서 감소하였다.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 1999.05a
• /
• pp.207-212
• /
• 1999

화학반응이 일어나는 고정층 반응기의 성능을 모사하고 해석하기 위해서는 반응베드의 열 및 물질전달 특성을 정확히 아는 것이 중요하다. 본 연구에서는 화학열펌프에 사용되는 금속염-팽창흑연 다공성 반응매체의 유효열전도도와 기체투과도를 측정하였다. 유효열전도도는 전이 일차원 열류기법을 이용하여 측정하였고, 기체투과도는 Darcy's law를 이용하여 측정하였다. 팽창흑연이 함유된 반응베드의 유효열전도도와 기체투과도는 흑연을 기준으로 한 겉보기밀도에 따라 각각 14.1-36.5 W/mK, 8.0x$10^{-15}$-$10^{-12}$ $m^2$의 범위에 있었다.

• Korean Journal of Agricultural Science
• /
• v.39 no.3
• /
• pp.395-405
• /
• 2012

Lipozyme TL IM-catalyzed esterification was carried out to produce functional hard fat (structured lipid, SL) using palm stearin (PS) and hydrolysate of pomegranate seed oil (HPSO) of 1:6 molar ratio. HPSO contained conjugated linolenic acid (CLnA, about 80%). The reaction was performed at non-solvent system and solvent (n-hexane) system using Lipozyme TL IM (10% of total substrates, w/w) for 12, 24, and 72 hr in a shaking water bath ($55^{\circ}C$ and 185 rpm), respectively. SL synthesized in non-solvent system (NH-SL) and SL synthesized in n-hexane system (H-SL) were refined after deacidification, respectively. Their physicochemical properties were compared to obtain desirable functional hard fat. The content of CLnA in NH-SL increased from 34.38% to 40.63% with increasing reaction time. Similar results also observed in H-SL resulting in 36.81~45.83% of CLnA. In triacylglycerol (TAG) composition, the main molecules of LnLnLn (Ln=linolenic acid, PN=36) and the LnLnP (P=palmitic acid, PN=40) were newly synthesized in NH-SL and H-SL with increasing reaction time. After 72 hr reaction, iodine values of NH-SL (136.49) and H-SL (140.37) showed high values because of the high content of CLnA. Solid fat index (SFI) in NH-SL was higher than that in H-SL at each measured temperature. The predominant polymorphic forms of NH-SL and H-SL obtained after esterification for 72 hr were the desirable crystalline structure of the ${\beta}$' form.

• Tuberculosis and Respiratory Diseases
• /
• v.42 no.3
• /
• pp.332-341
• /
• 1995

Background: Measurement of bronchodilator response is necessary to establish reversibility of airflow obstruction that was helpful to estimate the diagnosis, treatment, and prognosis in obstructive airway disease. An useful index should be able to detect the bronchodilator response more sensitively not related with degree of airflow obstruction and also be independent of initial $FEV_1$. Method: Sensitivities of bronchodilator response in each group classified by degree of airflow obstruction in $FEV_1$, FVC, $FEF_{25\sim75%}$, Isovolume $FEF_{25\sim75%}$, sGaw were studied and correlation coefficients were calculated between initial $FEV_1$ and reversibilities expressed as absolute, %initial, % predicted, %possible in $FEV_1$. Result: Sensitivities of bronchodilator response were 61.5% in FVC, Isovolume $FEF_{25\sim75%}$ and sGaw, in severe group, and 56.3% in Isovolume $FEF_{25\sim75%}$ and sGaw, in moderate group, and 62.5% in $FEV_1$ and sGaw and 50.0% in FVC and Isovolume $FEF_{25\sim75%}$, in mild group, and 60.0% in sGaw and 58.0% in Isovolume $FEF_{25\sim75%}$ in total patients. Correlation coefficients between initial $FEV_1$(L) and absolute, % initial, % predicted, % possible were 0.15, -0.22(p<0.05), 0.02, 0.24(p<0.05) and correlation coefficients between initial $FEV_1$(% predicted) and absolute, % initial, % predicted, %possible were 0.06, -0.28(p<0.05), 0.08, 0.39(p<0.05). Conclusion: Volume related parameters were more sensitive index not related with degree of airway obstruction and the change in $FEV_1$ expressed as % predicted was the least dependent on initial $FEV_1$ and reversibilities, expressed as % initial or as % possible(predicted minus initial $FEV_1$)were correlated with initial $FEV_1$.

• Journal of Preventive Medicine and Public Health
• /
• v.28 no.1 s.49
• /
• pp.27-42
• /
• 1995

The in vivo and in vitro humoral and cell-mediated immune responses of lymphocytes of BALB/c mouse exposed to mercury chloride$(HgCl_2)$ were investigated. In vitro exposure of the splenocytes to mercury chloride produced overt cytotoxicity in 3 hours period. The $IC_{50}$(the concentration required to inhibit a splenocyte viability by 50%) for mercury chloride was >0.1mM for cytotoxicity. In vivo mercury chloride exposed mice were significantly depressed delayed type hypersensitivity(DTH) response to sheep red blood cells(SRBC) in a dose-dependent manner compared with control group. Mercury chloride inhibited the proliferative responses of splenocytes to lipopolysaccharide, pokeweed mitogen, concanavalin A and phytohemagglutinin in a dose-dependent manner. Hemagglutinin response to SRBC in mercury chloride exposed mice was significantly depressed in a dose-dependent manner compared with control group. After 7 weeks of mercury chloride exposure in vivo, mercury chloride induced an increase of nonspecific serum $IgG_1$ and IgE levels in BALB/c mice.

• Radiation Oncology Journal
• /
• v.17 no.3
• /
• pp.256-260
• /
• 1999

Purpose : An investigation has been carried out on the factors which affect the response reading of thermoluminescent dosimeters (TLD-100) loaded with thin material in high energy Photon. The aim of the study was to assess the energy response of TLD-100 to the therapeutic ranges of photon beam. Materials and Methods : In this technique, TLD-100 (abbreviated as TLD) chips and three different thin material (Tin, Gold, and Tissue equivalent plastic plate) which mounted on the TLD chip were used in the clinical photon beam. The thickness of each metal plates was 0.1 mm and TE plastic plate was 1 mm thick. These compared with the photon energy dependence of the sensitivities of TLD (normal chip), TLD loaded with Tin or Gold plate, for the photon energy range 6 MV to 15 MV, which was of interest in radiotherapy. Results : The enhancement of surface dose in the TLD with metal plate was clearly detected. The TLD chips with a Gold plate was found to larger response by a factor of 1.83 in 10 MV photon beam with respect to normal chip. The sensitivity of TLD loaded with Tin was less than that for normal TLD and TLD loaded with Gold. The relative sensitivity of TLD loaded with metal has little energy dependence. Conclusion : The good stability and linearity with respect to monitor units of TLD loaded with metal were demonstrated by relative measurements in high energy Photon ($6\~15$ MV) beams. The TLD laminated with metals embedded system in solid water phantom is a suitable detector for relative dose measurements in a small beam size and surface dose.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.40 no.4
• /
• pp.336-345
• /
• 2012

In crack growth life, uncertainties are caused by variance of geometry, applied loads and material properties. Therefore, the reliability estimation for these uncertainties is required to keep the robustness of calculated life. The stress intensity factors are the most important variable in crack growth life calculation, but its equation is hard to know for complex geometry, therefore they are processed by the finite element analysis which takes long time. In this paper, the response surface is considered to increase efficiency of the reliability analysis for crack growth life of a turbine wheel. The approximation model of the stress intensity factors is obtained by the regression analysis for FEA data and the response surface of crack growth life is generated for selected factors. The reliability analysis is operated by the Monte Carlo Simulation for the response surface. The results indicate that the response surface could reduce computations that need for reliability analysis for the turbine wheel, which is hard to derive stress intensity factor equation, successfully.