• Elastomers and Composites
• /
• v.38 no.4
• /
• pp.295-302
• /
• 2003

The amount of shrinkage of injection molded parts is different from operational conditions of injection molding such as injection temperature, injection pressure and mold temperature, and mold design such as gate size. It also varies depending on the presence of crystalline structure in resins. In this study, part shrinkage was investigated for various operational conditions and resins. Poly(butylene terephthalate) (PBT) for crystalline polymer, and polycarbonate (PC) and poly(methyl methacrylate) (PMMA) for amorphous polymers were used. Crystall me polymer showed higher part shrinkage by about three times than that of amorphous polymers. Part shrinkage increased as melt and molt temperatures increased, and injection pressure decreased. Part shrinkage decreased as gate size increased since the pressure delivery is mush easier for larger gate sizes. Part shrinkage at the position close to the gate was larger than that or the position far from gate. This phenomenon might be occur by difference of residual stress.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.10a
• /
• pp.157-157
• /
• 2003

• Korean Journal of Materials Research
• /
• v.3 no.5
• /
• pp.514-520
• /
• 1993

In this paper the cure cycle of carbon fiber/phenolic resin was investigated by the Taguchi Method in an experimental design. Experiments were systematically performed using $L_{18}(2^1 \times 3_7)$ orthorgonal array table of the experimental design. In the experimental design, eight compression molding parameters (heating rate, pressing temperature, pressing rate, molding pressure, curing temperature, dwell time at curing temperature, cooling rate and degassing) were considered and the effects of the parameters on the flexural strength and the apparent porosity of carbon fiber/phenolic composites were investigated. The analysis of variance for the experimental results indicated that molding pressure and curing temperature are the most significant parmeters in the flexural strength and the apparent porosity of carbon fiber/phenolic resin composites, respectively.

• Proceedings of the Korean Fiber Society Conference
• /
• 1994.04a
• /
• pp.62-63
• /
• 1994

• The Korean Journal of Rheology
• /
• v.5 no.2
• /
• pp.109-124
• /
• 1993

본 연구의 목표는 임의의 3차원 사출성형 금형 공간내에서 단섬유 강화 플라스틱의 충전 공정에서의 과도기적 섬유방향성을 예측하는 수치해석 프로그램의 개발에 있다. Hele-Shaw 방정식에 단섬유에 의해서 추가된 응력을 고려한 Dinh-Armstrong의 모델을 도 입함으로써 새로운 충전과정의 압력 지배 방정식이 유도되었다. 새로운 압력지배 방정식은 단섬유에 의한 응력 때문에 몇 개의 새로운 항들을 포함하고 있다. 충전 과정의 해석은 새 로운 압력지배방정식과 에너지 방정식을 유한효소법과 유한 차분법을 이용하여 풀고 동시에 배향텐서(roientation tensor)의 변화 방정식을 4차 Runge-Kutta 방법을 이용하여 풀었다. 단섬유 배향 텐서를 텐서의 변환 법칙을 이용하여 임의의 3차원 금형 공간내의 모든유한요 소의 중심에서 두께방향의 모든유한 차분 격자를 따라 계산하였다. 이러한 방법으로 임의의 3차원 사출성형 금형 공간내에서 비등온 충전유동과 과도기적 3차원 섬유배향상태를 서로의 상호작용을 고려하여 수치 모사하여 다양한 유동 형태에 따른 단섬유 배향 상태의 변화에 대하여 알아보고자 한다.

• Proceedings of the KIEE Conference
• /
• 2006.10d
• /
• pp.40-42
• /
• 2006

연자성 복합재료는 기존의 철판 대비 기계적, 자기적 특성 떨어지는 것이 사실 이였다. 본 연구에서는 이러한 문제점 개선을 위해서 저점도 윤활제 적용을 통한 빼기 압력 저감 방안을 도출하였다. 연자성체의 고강도화, 우수한 자기적 특성을 얻기 위해서 높은 압력의 성형이 필수적인데 높은 압력으로 성형시 빼기 압력이 높아져서 금형이 파손되는 등 문제점으로 인해 우수한 특성을 얻을 수 없었다. 본 연구에서는 이러한 문제점을 해결하기 위해서 저 점도액체 윤활제, 고점도 액체 윤활제, 고체 윤활제 3가지의 윤활제 특성을 검토 하였다. 또한 저점도 액체 윤활제 적용을 통해서 기존 대비 강도 10%, 철손 10%, 빼기 압력 30%를 저감 하였다.

• 한국초전도학회:학술대회논문집
• /
• v.10
• /
• pp.304-307
• /
• 2000

고순도 니켈분말을 사용하여 성형, 소결, 압연 및 중간소둔 공정을 통해 cube-texture를 갖는 니켈테이프를 제조하였다. 제조된 니켈테이프의 texture는 성형압력, 성형체의 소결 온도 및 시간, 냉간 압하율 및 중간열처리에 따라 달라지는 것을 관찰하였다. 200kgf/cm$^2$ 의 성형압력으로 제조한 성형체를 1000$^{\circ}$C의 온도에서 8시간열처리한 소결체를 100${\sim}$50 $_{\mu}$m로 압연된 tape을1000$^{\circ}$C 1시간 열처리 할 때 가장 우수한 texture를 가지는 tape을 제조할 수 있었다. 긴 니켈테이프를 제조하기 위해 50cm 길이의 mold에서 성형한 green-pellet을 불활성 분위기(Ar:96%-H$_2$:4%)에서 1000$^{\circ}$C, 8시간동안 열처리하여 소결하였다 400mm길이에 17${\sim}$20mm 두께의 소결체를 압연하여 100$_{\mu}$m두께의 긴 니켈 테이프를 제조하였다. 제조한 테이프의 texture는 소형으로 제조한 테이프에 비해 떨어졌으며 이는 압연 시 시료에 너무 큰 인장력을 가했기 때문으로 사료된다.

• Polymer(Korea)
• /
• v.38 no.2
• /
• pp.144-149
• /
• 2014

Large residual stresses are remained in the conventional injection molded products because of the high cavity pressure in packing phase during injection molding process. Conventional injection molding (CIM) invokes distribution of cavity pressure and it has a limitation to obtain product with uniform physical property. Multi-cavity conventional injection molding contains quality deviation among the cavities since flow imbalance occurs during filling phase. Injection compression molding (ICM) is adopted to overcome these limitations of CIM. In this study, molding characteristics of CIM and ICM have been investigated using multi-cavity injection mold. Researches were performed by both experiment and computer simulation through observations of birefringence for transparent resins, polycarbonate and polystyrene in CIM and ICM. As a result, low and uniform birefringence and mold shrinkage were showed in the specimens by ICM that could give a uniform cavity pressure. Deviation of physical property among the specimens in multi-cavity mold shown in CIM was significantly reduced in the specimens by ICM. Through this study it was concluded that the ICM in multi-cavity molding was valid for molding products with uniform property in an individual cavity and also reduced property deviation among the cavities.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.10
• /
• pp.941-948
• /
• 2017

Recently, hydrogen energy has been in the spotlight as an alternative to diminishing fossil fuels and as a potential solution to environmental pollution. The development of hydrogen-fueled vehicles and the demands for improved fuel efficiencies have resulted in the need to increase the volume of the hydrogen pressure vessels. Pressure vessels having an elliptical bottom, as opposed to one that is hemispherical, allow for a greater capacity. However, there are insufficient studies on the feasibility of the forming process required for an elliptical bottom. In this study, the liner capacity is calculated according to the ratios of the major to the minor axes of the elliptical bottom part in a hydrogen pressure vessel. Structural safety is verified through finite element analyses, and the results are compared to the theoretical results. The feasibility of the proposed elliptical shape of the pressure vessel bottom, while filled to maximum capacity, is validated through forming analysis.

• Korean Journal of Food Science and Technology
• /
• v.27 no.3
• /
• pp.324-328
• /
• 1995

The changes in the rheological properties of soybean curd upon the processing conditions were measured by the failure test, and analyzed by the stress-relaxation data. Soybean curd coagulated with $CaCl_2$ showed a higher failure stress value than other coagulants such as $MgCl_2,\;CaSO_4\;and\;Glucono-{\delta}-lactone$ (GDL), whereas addition of 0.3% $CaCl_2$ produced higher failure stress value than other concentrations $0.2{\sim}0.6%)$. Also, maximum failure stress of soybean curd was shown at the higher heating temperatures$(95^{\circ}C)$ and greater molding pressures, respectively. Initial and equilibrium stress at the stress relaxation curves showed the same tendency as those of failure test, and magnitude of elastic elements$(E_0,\;E_e)$ and viscous element$({\eta})$ were numerically expressed through simple Maxwell model analysis.