• Proceedings of the Korea Concrete Institute Conference
• /
• 2009.05a
• /
• pp.163-164
• /
• 2009

Recently, RC construction method has needs of many construction expenses and previous by accessory construction progress in construction field. On the other hand, Shell PC column reduces construction expenses and previous. Therefore, the purpose of this study is to the analyze the economical propriety about Centrifugal Formed Shell PC columns application of a field as compared with the RC and PC construction method.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.10a
• /
• pp.154-154
• /
• 2003

• Proceedings of the Ginseng society Conference
• /
• 2003.05a
• /
• pp.43-44
• /
• 2003

• Proceedings of the Korean Society of Disaster Information Conference
• /
• 2017.11a
• /
• pp.197-198
• /
• 2017

인공재해와 자연재해로 인해 발생하는 비정상 하중에 의해 국부손상이 발생된 철골 교량 구조물은 추가적인 2차 붕괴의 위험요소들을 내재하고 있어 신속한 전면 해체가 요구된다. 본 시공 사례는 건설실패와 태풍 및 지진으로 국부손상이 발생된 철골 트러스 구조의 교량의 긴급해체를 위해 발파해체 공법을 적용한 사례이다. 철골 부재의 절단을 위해 성형폭약이 필요하지만 현지에서 수급이 불가능한 상태이기 때문에 장약용기를 직접 제작하고 에멀젼 폭약을 충전하여 만든 성형폭약을 이용하여 발파해체에 적용하였다. 직접 제작한 성형폭약을 이용하여 발파해체한 결과 철골 부재가 정확히 절단되면서 교량의 중앙부가 수직자유낙하하고, 교량의 양 끝단은 지지부를 중심으로 회전낙하 하였다. 또한 존치 구조물 및 주변에 피해가 발생하지 않았으며, 발파 후 파쇄 상태는 매우 양호하였다. 이로 인해 직접 제작한 성형폭약의 절단 성능을 확인할 수 있었으며, 신속하고 안전하게 국부손상이 발생된 구조물을 해체하였다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.11
• /
• pp.501-509
• /
• 2019

The construction of foundation piles for buildings and bridges is changing from pile driving to an injected precast pile method. The goal is to minimize environmental damage, noise pollution, and complaints from neighboring residents. However, it is necessary to develop economic piles that are optimized for precasting by a centrifugal method in terms of both the material and structural system. A reinforced joint method is proposed for reinforced concrete piles (RC piles) manufactured by centrifugal casting. A previous study concluded that the structural performance of the current joint system for RC piles could be improved by using a reinforced joint composed of extended circular band plates and studs. In this study, the structural performance of such a joint was validated experimentally by bending and shear strength measurements. The proposed joint reinforcement method showed adequate structural performance in terms of bending and shear strength. The overall load-deflection behavior is close to that of a structure without joints, so it is expected that the behavior and performance of the design can be reliably reflected in site structures.

• Explosives and Blasting
• /
• v.36 no.3
• /
• pp.19-28
• /
• 2018

Locally damaged structures caused by earthquake or extraordinary external forces have been required to rapidly be dismantled because of its possibility of additional collapses. Particularly, steel frame structures were demolished by the shaped charge blasting method. Recently a research suggested a shape charge blasting technique which uses bent-shaped charge holder of copper plate and emulsion explosive charge to cut thick steel plates. This study simulated the cutting performance of the bent-shaped charge holder with considering types of explosives, thickness of copper liner and stand-off distances using LS-DYNA software. The shape charge blasting test of a 25mm thickness steel plate were used to calibrate the input parameters of the numerical models. The penetration depth and penetration width were analysed with different types of explosives, thickness of copper liner and stand-off distances.

• Journal of Korea Ship Safrty Technology Authority
• /
• s.26
• /
• pp.4-23
• /
• 2009

선체용 복합재료 및 구조용 접착제와 신공법인 진공 성형법으로 건조한 레저선박에 강화플라스틱 구조기준을 그대로 적용하기에는 무리가 있으며, 따라서 복합재료, 수지, 접착제 및 진공 성형법 등 현장조사를 토대로 복합소재 및 접착제를 이용한 시험편을 제작하여 복합재료의 기계적 특성, 구조용 접착제에 대한 신뢰성 평가 및 국내외 기준 비교 검토를 통한 국내 실정에 적합한 검사기준을 제안하고자 한다.

• Journal of the Korea Institute of Building Construction
• /
• v.10 no.2
• /
• pp.105-113
• /
• 2010

Method or work type improvement is needed in relation to reducing cost and increasing efficiency by ensuring construction quality and reducing labor in the form work process. This would have a great influence on the entire construction process, and make the process of adopting materials and methods more rational and economic. Hence, this study aimed to develop a Synthetic Resins Euroform that could improve durability, water-proofing, sophistication, and organizational unity through the use of injection modeling. Accordingly, this paper first investigated various performance requirements and necessary techniques, and then verified feasibility by evaluating the physical safety and technical validity when it is applied to construction field. In addition, this study evaluated the constructability, safety performance, environmental performance, and systemic excellence in terms of maintaining convenience of Synthetic Resins Euroform. Moreover, to verify feasibility in the construction field, this study analyzed and evaluated the maximum stress by measuring the load and deformation of the space of the horizontal furring, which is attached to Euroform as an armature.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.32 no.10
• /
• pp.890-896
• /
• 2008

Sheet metal forming is one of the most useful and important method in manufacturing of the autobody panels because of the excellent production rate. The objectives of sheet metal forming processes are getting a desired geometrical shape of products with good quality, low cost and reasonable lead time. In this paper, we examined the validity of finite element method analysis on the automobile FRT-PLR-L/R stamping process by using the lancing engineering method. Lancing is a press operation in which a single-line cut or slit is made on part way across the strip stock, without removing any metal. As a result, it has shown that the proper lancing engineering method could prevent fracturing by improving sheet metal flow.

• Journal of Aerospace System Engineering
• /
• v.17 no.2
• /
• pp.71-77
• /
• 2023

Liquid Composite Molding (LCM), an Out of Autoclave (OoA) composite manufacturing process, has big advantages when making large and complex structures of airplanes. Since the importance of LCM process is increasing, FAA has suggested recommended guidance and criteria for the development of material and process specifications for LCM materials and process. The importance of LCM process is also raised by domestic composite material suppliers and OEM. This study suggested structures of material specifications and process specification of LCM materials. Material qualification method for LCM process and material was also developed in this study.