• Korean Journal of Crystallography
• /
• v.9 no.2
• /
• pp.96-106
• /
• 1998

수평 전기로에서 AgInS2 다결정을 합성하여 HWE 방법으로 AgInS2 단결정 박막을 반절연성 GaAs(100) 위에 성장하였다. AgInS2 단결정 박막은 증발원과 기판의 온도를 각각 680℃, 410℃로 성장하였다. 이때 단결정 박막의 결정성이 10 K에서 측정한 광발광 스펙트럼은 597.8 nm(2.0741 eV) 근처에서 엑시톤 방출 스펙트럼이 가장 강하게 나타났으며, 또한 이중결정 X-선 요동곡선(DCRC)의 반폭치(FWHM)도 121 arcsec로 가장 작게 측정되어 최적 성장 조건임을 알 수 있었다. Hall 효과는 van der Pauw 방법에 의해 측정되었으며, 온도에 의존하는 운반자 농도와 이동도는 293 K에서 각각 9.35×1023개/㎥, 2.94×10-2㎡/V·s였다. AgInS2 단결정 박막의 광전류 단파장대 봉우리들로부터 10 K에서 측정된 ΔCr(crystal field splitting)은 0.15eV, ΔSo(spin orbit coupling)는 0.0089 eV였다. 광전도 셀로서 응용성을 알아보기 위해 감도(γ), pc/dc(photocurrent/darkcurrent), 최대허용소비전력(maximum allowable power dissipation: MAPD), 응답시간(response time)등을 측정한 결과, S 증기 분위기에 열처리한 광전도 셀의 경우 γ=0.98, pc/dc=1.02×106, MAPD=312 mW, 오름시간(rise time)=10.4 ms, 내림시간(decay time)=10.8 ms로 가장 좋은 특성을 얻었다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.397-397
• /
• 2012

에너지갭이 큰 SnO2 반도체는 빛 투과율이 우수하여 투명성이 좋으며 화학적으로 안정된 구조를 가지고 있어 전자소자 및 광소자 응용에 대단히 유용하다. SnO2 박막을 증착하는 방법은 Physical Vapor Deposition과 Chemical Vapor Deposition이 있으나 나노 구조를 가진 SnO2를 형성하기 어렵다. 전기 화학적 증착 (Electrochemical Deposition: ECD)은 낮은 온도에서 진공 공정이 필요하지 않기 때문에 경제적이며 빠른 성장 속도를 가지고 있기 때문에 SnO2 나노 구조를 효과적으로 형성 할 수 있다. 본 연구에서는 Indium Tin Oxide (ITO) 기판 위에 SnO2 나노 구조를 형성시켜 전기적 및 구조적 특성을 관찰하였다. 0.015 M의 Tin chloride pentahydrate(SnCl4 5H2O)를 타켓 물질로 사용하고 0.1 M의 KCl을 완충물질로 사용하여 SnO2 나노구조를 성장하였다. 타겟 물질이 잘 녹지 않으므로 DI water와 ethanol을 7：3의 비율로 용매 사용하였다. 전류-전압 곡선을 분석하여 최적의 성장조건을 확보하고, $65^{\circ}C$ 1기압 하에서 -2.5 V 부터 -1.0 V까지 0.5 V 간격으로 나누어서 SnO2 나노구조를 성장하였다. X-선 회절 분석결과에서 SnO2의 피크의 크기가 큰 전기화적적 성장 전압구간과, 주사전자현미경 분석 결과에서 나노 구조가 가장 잘 나타난 성장 전압구간을 다시 0.1 V 간격으로 세분화하여 최적화 조건을 분석하였다. X-선 회절 실험으로 형성한 SnO2 나노구조의 피크가 (110) (101) (200) (211) (310)로 나타났다. X-선 회절 분석의 intensity의 값이 (101)방향이 가장 크게 나타났으므로 우선적으로 (101) 방향으로 SnO2 나노구조가 성장됨을 알 수 있었다. 주사전자현미경상은 grain size가 50~100 nm 사이의 SnO2 나노구조가 형성되며, grain size가 전기화학적 증착 장치의 성장전압이 저 전압 구간에서 커지는 것을 알 수 있었다.

• KSBB Journal
• /
• v.18 no.4
• /
• pp.277-281
• /
• 2003

The study of growth characteristics for Spirulina platensis were carried out in 400 mL cylindrical photobioreactor and the effects of carbon dioxide concentration and flow rate during the growth of Spirulina platensis were investigated. The results showed that relatively low carbon dioxide concentration and high flow rate forced the growth of Spirulina platensis in experiment conditions. The pH analysis showed that different carbon dioxide concentration might form particular aqueous carbonate system in culture medium and affect the growth of Spirulina platensis. In addition, the possibility of limiting light radiation by cell density was investigated by the analysis of specific growth rate. The result intimated that the cause of decrease of specific growth rate at exponential phase was due to the limitation of light radiation by Spirulina platensis cell density in cylindrical photobioreactor.

• Fire Science and Engineering
• /
• v.32 no.2
• /
• pp.7-16
• /
• 2018

In this study, the previous design fire curve for fire simulation was modified and re-suggested. Numerical simulations with the FDS and CFAST were performed for the n-heptane and n-octane pool fires in the ISO 9705 compartment to evaluate the prediction performances of the previous 1-stage and modified 2-stage design fire curves. The numerical results were compared with the experimental temperature and concentrations of $O_2$ and $CO_2$. The FDS and CFAST simulations with the 2-stage design fire curve showed better prediction performance for the variation of temperature and major species concentration than the simulations with 1-stage design fire curve. Especially, the simulations with the 2-stage design fire curve agreed with the experimental temperature more reasonably than the results with the 1-stage design fire curve. The FDS and CFAST simulations showed good prediction performance for the temperature in the upper layer of compartment and the results with the FDS and CFAST were similar to each other. However, the FDS and CFAST showed poor and different prediction performance for the temperature in the lower layer of compartment.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.20 no.5
• /
• pp.809-822
• /
• 2018

A quantitative risk assessment has been introduced to quantitatively evaluate fire risk as a means of performance based fire protection design in the design of railway tunnel disaster prevention facilities. However, there are insufficient studies to examine the effect of various risk factors on the risk. Therefore, in this study, the risk assessment was conducted on the model tunnel in order to examine the effects of the evacuation start time delay and the fire growth curve on the quantitative risk assessment. As a result of the analysis of the scenario, the fatalities occurred mainly when escapes in the same direction as the direction of the fire smoke movement. In addition, after the FED exceeded 0.3, the maximum fatalities occurred within 10 minutes. In the range of relatively low risk, distance between cross passages, evacuation delay time and fire growth curve were found to affect the risk, but they were found to have little effect on the condition that the risk reached the limit. Especially, in this study, it was evaluated that the evacuation delay time reduction, fire intensity and duration reduction effect were not observed when the distance between cross passages was more than 1500 m.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.39 no.10
• /
• pp.1522-1527
• /
• 2010

This study was conducted to find out the minimal time needed for detection of Salmonella spp. which exist at very low concentration in foods by using real-time PCR. The sal-F and sal-R sequences were used as primers and sal-P was used as a probe. The detection limit of Salmonella spp. was $3.77{\times}10^2\;cfu/mL$ in buffered peptone water (BPW). Microbial growth was monitored after artificially inoculated Salmonella spp. into BPW. The obtained growth curve was well fitted with the equation, y＝$0.0127x^2$+0.5927x-0.4317 ($R^2$=0.99), if assuming that 1 cell exists in 25 g sample (0.04 cfu/mL). The microbial concentration will be reduced to 10 fold by adding BPW during sample treatment, so actual initial concentration at the starting point of enrichment is 0.004 cfu/mL. At this condition, real-time PCR detection would be possible only when microbial concentration increase occurs to exceed the detection limit (377 cfu/mL). The time needed for microbial increase was calculated from the growth curve equation as 7 hours and 20 minutes. Therefore the total time required for detection was less than 10 hours including the PCR operating time.

• Journal of the Economic Geographical Society of Korea
• /
• v.25 no.4
• /
• pp.629-640
• /
• 2022

This study analyzed the relationship between local government size and regional economic growth using regional data from 2002 to 2020. By dividing local government expenditure into social development expenditure and economic development expenditure, economic growth and the inverted U-shaped Armey curve were verified, and the optimal size of local government expenditure was examined. In particular, the AMG estimation method considering the cross-sectional dependence and regional heterogeneity existing in the panel data was utilized. As a result of the analysis, it was found that there was an inverted U-shaped relationship between local fiscal expenditure and regional economic growth. When the proportion of total local fiscal expenditure is 7.63% of GRDP and social development expenditure is 3.45%, it is found that the optimal size of expenditure can maximize the regional economic growth rate. Local governments should increase the effectiveness of public expenditure policies by considering these points.

• The korean journal of orthodontics
• /
• v.28 no.2 s.67
• /
• pp.285-295
• /
• 1998

In clinical orthodontics, it is significant to understand the stage of growth in a growing patient. In order to assess the skeletal maturity of the patients, the hand-wrist radiograph and the cervical vertebrae (Cervical Vertebrae Maturation Indicators : CVMI) was evaluated from the lateral cephalograph and the skeletal maturity determined from the hand-wrist X-ray (Skeletal Maurity Indicators : SMI) taken on the same day in the same patients, and its interrelationship examined to come up with the following results: 1. The skeletal maturity evaluated from the hand-wrist radiograph and the maturation of the cervical vertebrae from the lateral cephalograph showed a significant interrelationship with each other. 2. In the evaluation of the skeletal maturity using the SMI and CVMI, the CVMI 1 showed a siginificant correlation with SMI 1, 2, the CVMI 2 with SMI 3, 4, CVMI 3 with SMI 6, 7, CVMI 4 with SMI 7, 8, CVMI 5 with 9, 10 and CVMI 6 with SMI 11. 3. When the morphological changes in the 2nd and 3rd cervical vertebrae were separately observed, it was seldom that the concavity appeared in the lower border of the 2nd cervical vertebra and at the same time not appear in the 3rd cervical vertebra (CVMI 2 : 10.38%, CVMI 3 : 6.56%) 4. In each of the skeletal maturation stage evaluated from the hand-wrist and the cervical vertebra, the average age and its standard deviation in male and female patients appeared to have large differences among individuals. Skeletal maturation seemed to appear earlier for the girls than for the boys, and its termination 24 months faster for girls.

• International Area Studies Review
• /
• v.13 no.3
• /
• pp.331-359
• /
• 2009

We forecast the performance of the Korean biotechnology industry by adopting similar development paths taken by the U.S. biotechnology and Korean ICT industries. Our long-term forecasting techniques predict that Korean BT market size will increase from 3.7 billion to 10.8 billion U.S. dollars by year 2030. The pharmaceutical industry, one of major bio-subindustries, is expected to dominate Korean BT market in the long-run. Also, the relative portion of the exports in the Korean BT industry will be larger and thus the export-oriented government policy is required for the long-run growth of the Korean BT industry. Since the Korean ICT industry has already slowed down in the development, Korean BT industry is likely to catch up with ICT industry in the near future.

• Journal of the korean veterinary medical association
• /
• v.20 no.1
• /
• pp.49-61
• /
• 1984

The purpose of the experiment was to clarify morphologically normal growth pattern of male reproductive organ in heavy meat breed rooster. The observations were composed of normal growth in weight of whole body, comb, testis and pituitary glands and of hi