• Korean Journal of Materials Research
• /
• v.8 no.12
• /
• pp.1110-1114
• /
• 1998

The crystallization behaviors and electrical conductivities of the glasses heat-treated at various times and temperatures in the CuO-Bi$_2$O$_3$-V$_2$O$_{5}$ glass system were investigated. Among glass samples with various compositions, the highest conductivity obtained in the 31CuO-14Bi$_2$O$_3$-55V$_2$O$_{5}$ (mol%) glass sample. The 31CuO-14Bi$_2$O$_3$-55V$_2$O$_{5}$ (mol%) glass sample crystallized by heat treatment at 358$^{\circ}C$ for 8h had 2.67$\times$10$^{-2}$ $\Omega$$^{-1}$ $cm^{-1}$ /, which was much high value as a solid electrolyte. Compared to the glass sample, the heat- treated glass sample was increased in conductivity by an order of 10$^3$-10$^4$due to the formation and growth of BiVO$_4$ and CuVO$_3$crystals.

• Journal of the East Asian Society of Dietary Life
• /
• v.6 no.1
• /
• pp.105-114
• /
• 1996

Certain Fungi Including Aspergillus flavus produce low molecular secondary metabolite that is toxic to human and animals, which have been termed mycotoxin. Given the proper humidity and temperature like summer in Korea, are capable of growing of those hazard fungi and elaborating mycotoxin on almost any organic substrate such as traditional foodstuffs and their raw materials including rice, barley, corn, meju, doenjang and gochujang etc. Until now, some people have examined to isolate various fungi such as Aspergillus sp., Penicillium sp. and Fusarium sp. from traditional foodstuffs and raw materials, and have screened various mycotoxin producing strains. Some mycotoxin contamination such as aflatoxin, ochratoxin, deoxynivalenol (DON) and zearalenone etc. also have been confirmed from similar above samples. But these data are different each other and inconsistent in experimental conditions and methods. Especially, almost experiments have been finished for one time. So more consistent experimental method and data are necessary to evaluate objectiely the safety of traditional foodstuffs subjected to the mycotoxin. For this purpose, we have to apply a new advanced technology to develop more simple and rapid methods for determination of mycotoxin and also have to concentrate our efforts on activation of research and accumulation of technology nth sustaining investment of financial support and enlargement of research installation. With those harmonious efforts, it should be possible to examine continuously nd systematically the mycotoxin contamination in our traditional foodstuffs and to assure the safety of them. Then we can maintain and develop the better traditional foodstuffs suited to internationalization.

• Journal of the Korean Magnetics Society
• /
• v.19 no.3
• /
• pp.85-88
• /
• 2009

Magnetic phases of polycrystalline $Ge_{1-x}Mn_x$ thin films were studied. The $Ge_{1-x}Mn_x$ thin films were grown at $400^{\circ}C$ by using a molecular beam epitaxy. The $Ge_{1-x}Mn_x$thin films were p-type and electrical resistivities were $4.0{\times}10^{-2}{\sim}1.5{\times}10^{-4}ohm-cm$. Based on the analysis of magnetic characteristics and microstructures, it was concluded that the ferromagnetic phase formed on the $Ge_{1-x}Mn_x/SiO_2$/Si(100) thin films was $Ge_3Mn_5$ phase which has about 310 K of Curie temperature. Moreover, the $Ge_{1-x}Mn_x$ thin film which had $Ge_3Mn_5$ phase showed the negative magnetoresistance to be about 9% at 20 K when the magnetic field of 9 T was applied.

• Elastomers and Composites
• /
• v.36 no.2
• /
• pp.111-120
• /
• 2001

Mechanical properties and their adhesion behavior with zinc- and brass-plated steel cords of natural rubber/acrylonitrile-butadiene blend compounds were investigated as a function of blend ratio. The Mooney viscosity and stress relaxation time were found to be lowered with increasing NBR content. Tensile modulus generally increased with increasing NBR content. Tensile stress at break stayed constant up to about 40 phr and showed minimum at $50{\sim}60 phr$, and thereafter increased with increasing NBR content. Strain at break decreased linearly below 50 phr, and above the level it showed nearly constant value. Based on the abrupt drops in elastic modulus and tan ${\delta}$ peak, the glass transition temperature of NR and NBR were found to be -55 and $-10^{\circ}C$, respectively. In the case of NR/NBR blend compounds, two distinct transition points were observed and each transition position was not affected by NBR level indicating an incompatible nature of NR/NBR blend system. The pullout force and rubber coverage decreased to the level of about 40% to that of pure m compound, when the 50 phr of NR was replaced by NBR. However, the pure NBR compound showed the comparable adhesion performance with NR(${\sim}90%$). The sulfur concentration was found to become lower with the increased NBR content at the adhesion interface based on the Auger spectrometer results, representing a lack of adhesion layer formation, and this was explained for a possible cause of low adhesion performance with adding NBR.

• Korean journal of applied entomology
• /
• v.37 no.2
• /
• pp.137-142
• /
• 1998

The regional distribution and some ecological characteristics of Chinese white-wax scale, Ericerus pela Chavannes, were investigated from 1996 to 1997. It was found that 10.8% of the stems of the privet, Ligustrum obtusifolium infested with the scale in Chtingpyijng, whereas only 1.1% of them infested in Y6ngwol and Pyongtaek. The average survival rate of the female adult marked 85.3% after it hibernated on the privet, Ligustrum obtusifolium. A female laid 7,783.5 eggs in average and 36.7% of females fell on the range of 7,000-10,000 eggs. It sized 0.40 mm in length and 0.21 mm in width. The hatchability was highest at 27$^{\circ}$C with 66.8% and it seemed the optimum temperature for incubation. The pupation rate was lower than 50.0% at the above experimental temperatures and the emergence rate marked 67.3% at 25$^{\circ}$C. When the egg was preserved at the various low temperatures, it was found that the egg could be preserved at lS$^{\circ}$C for 50 days in maximum.

• Journal of the Korean Magnetics Society
• /
• v.7 no.5
• /
• pp.250-257
• /
• 1997

The microstructure and magnetic properties of Fe-Nb-B-N thin film alloys, which produced by rf magnetron sputtering method in $Ar+N_2$ mixed gas atmosphere, were investigated. The $Fe_{70}Nb_{14}B_{11}N_5$ films, annealed at 59$0^{\circ}C$, exhibit soft magnetic properties: $4{\pi}M_s=16.5kG$ , $H_c=0.13Oe$ and ${\mu}_{eff}$ (1~10 MHz)=5, 000. The frequency stability of the Fe-Nb-B-N films has also been found to be good up to 10 MHz. The Fe-Nb-B-N thin film alloys annealed at 59$0^{\circ}C$ consist of three phase; fine crystalline $\alpha$-Fe phase with grain size of about 5~10 nm, Nb-B rich amorphous phase and Nb-nitride precipitates with the size of less than 3 nm. Annealed Fe-Nb-B films have two phases; $\alpha$-Fe grains with the size of about 10 nm and Nb-B rich amorphous phase. The addition of N decreased $\alpha$-Fe grain size due to the precipitation of NbN. The good magnetic properties of the Fe-Nb-B-N film alloys are due to fine $\alpha$-Fe grains resulting from the precipitation of NbN.

• Korean Journal of Materials Research
• /
• v.18 no.4
• /
• pp.222-227
• /
• 2008

In this study, $BaTiO_3$ thin films were grown by RF-magnetron sputtering, and the effects of a post-annealing process on the structural characteristics of the $BaTiO_3$ thin films were investigated. For the crystallization of the grown thin films, post-annealing was carried out in air at an annealing temperature that varied from $500-1000^{\circ}C$. XRD results showed that the highest crystal quality was obtained from the samples annealed at $600-700^{\circ}C$. From the SEM analysis, no crystal grains were observed after annealing at temperatures ranging from 500 to $600^{\circ}C$; and 80 nm grains were obtained at $700^{\circ}C$. The surface roughness of the $BaTiO_3$ thin films from AFM measurements and the crystal quality from Raman analysis also showed that the optimum annealing temperature was $700^{\circ}C$. XPS results demonstrated that the binding energy of each element of the thin-film-type $BaTiO_3$ in this study shifted with the annealing temperature. Additionally, a Ti-rich phenomenon was observed for samples annealed at $1000^{\circ}C$. Depth-profiling analysis through a GDS (glow discharge spectrometer) showed that a stoichiometric composition could be obtained when the annealing temperature was in the range of 500 to $700^{\circ}C$. All of the results obtained in this study clearly demonstrate that an annealing temperature of $700^{\circ}C$ results in optimal structural properties of $BaTiO_3$ thin films in terms of their crystal quality, surface roughness, and composition.

• Journal of the Korean Vacuum Society
• /
• v.19 no.3
• /
• pp.224-229
• /
• 2010

Indium oxide $(In_2O_3)$ thin films have been prepared on glass substrate by using radio-frequency reactive magnetron sputtering with changing the oxygen flow ratio. The substrate temperature was kept at a fixed value of $400^{\circ}C$, and the sputtering gas and reactive gas were supplied with argon and oxygen, respectively. The oxygen partial flow ratio was varied by controlling the amount of oxygen with respect to the total mixed gases, 10%, 20%, 30%, 40%, and 50%. The optical, electrical, and structural properties of the deposited thin films were investigated by using ultraviolet-visible-near infrared spectrophotometer, Hall measurement, and X-ray diffractometer and scanning electron microscopy. The $In_2O_3$ thin film deposited at 20% of oxygen flow ratio showed an average transmittance of 86% in the wavelength range of 430~1,100 nm, an electrical resistivity of $1.1{\times}10^{-1}{\Omega}cm$. The results show that the transparent conducting films with optimum conditions can be achieved by controlling the oxygen flow ratio.

• Journal of Life Science
• /
• v.19 no.7
• /
• pp.845-851
• /
• 2009

A vector harboring double cassettes; a heterologous gene expression cassette of pHCE-InaN-antigen and a ghost formation cassette of pAPR-cI-E lysis 37 SDM was constructed and introduced to E. coli DH5a. For the production of a bacterial ghost vaccine, bacterial ghosts from E. coli / Streptococcus iniae with four different types of antigens - enolase, GAPDH, sagA and piaA - were produced by the optimization of fermentation parameters such as a glucose concentration of 1 g/l, agitation of 300 rpm and aeration of 1 vvm. Efficiency of ghost bacteria formation was evaluated with cultures of OD$_{600}$=1.0, 2.0 and 3.0. The efficiency of the ghost bacteria formation was 99.54, 99.67, 99.99 and 99.99% with inductions at OD$_{600}$=3.0, 1.0, 2.0 and 1.0 for E. coli/S. iniae antigens enolase, piaA, GAPDH and sagA, respectively. Ghost bacteria as a vaccine was harvested by centrifugation. The antigen protein expressions were analyzed by SDS-PAGE and western blot analysis, and the molecular weights of the enolase, piaA, GAPDH and sagA were 78, 26, 67 and 26 kDa, respectively. The molecular weights of the expressed antigens were consistent with theoretical sizes obtained from the amino acid sequences.

• Korean Journal of Microbiology
• /
• v.45 no.4
• /
• pp.339-345
• /
• 2009

Two lactic acid bacteria (LAB) with high ornithine-producing capacity were isolated from kimchi. Examination of the biochemical features using an API kit indicated that the strains belonged to the members of Weissella genus. They were gram positive, short rod-type bacteria, and able to grow anaerobically with $CO_2$ production. The isolates grew well on MRS broth at $25\sim37^{\circ}C$ and pH of 6.0~7.0. The optimum temperature and pH for growth are $30^{\circ}C$ and pH 6.5. The isolates fermented arabinose, ribose, xylose, glucose but not cellobiose, galactose, raffinose, or trehalsoe. The 16S rDNA sequences of isolates showed 99.6% and 99.7% homology with the Weissella koreensis S5623 16S rDNA (access no. AY035891). They were accordingly identified and named as Weissella koreensis OK1-4 and Weissella koreensis OK1-6, and could produce ornithine from MRS broth supplemented with 1% of arginine at a productivity of 27.01 and 31.41 mg/L/h, respectively. This is the first report on the production of ornithine by the genus Weissella isolated from kimchi.