• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.363-363
• /
• 2011

열분해 반응기 내에서 실리콘 필름을 성장시키는 것은 반도체/디스플레이, 태양전지, 신소재 등 다양한 분야에서 중요한 공정이다. 더욱이 반도체 소자 선폭이 줄어들면서 나노입자의 오염 제어가 더불어 중요해지고 있다. 생산 공정 기술의 집적화에 따라 패턴 사이 거리가 작아지고, 이에 불과 수 십 나노미터크기의 오염입자에 의해서 패턴불량이 발생하고 생산수율을 감소시킨다. 일반적으로 반도체 공정 중 발생한 오염입자는 반응기 내의 가스가 물리/화학적 공정에 의해 핵생성(nucleation)이 일어나 핵(nuclei)이 생성되고, 이 때 표면반응 및 응집(coagulation)에 의해 성장하게 된다. 이에 본 연구에서는 열분해 반응기 내에서 사일렌(SiH4) 가스를 열분해하여 발생되는 실리콘 오염입자의 핵생성과 성장 모델을 정립하고, 생성된 오염입자의 거동과 전달 현상을 이론적으로 고찰하였다. 열분해 반응기와 같은 기상공정(Gas to particle conversion)에서 오염입자가 생성될 때, 그 성질과 크기 등에 물리/화학적 영향을 주는 요소는 전구체/이송기체의 농도 및 유량, 작동 압력, 작동 온도와 반응기 고유 특성 등이 있다. 수치해석의 정당성과 빠른 계산을 위해 단순화시킨 0D 모델인 Batch 반응기와 1D모델인 plug flow 반응기 등에서 SiH4 가스의 열분해 과정시 생성되는 Si cluster를 상용코드인 CHEMKIN 4.1.1을 이용하여 계산하였으며, 2D모델인 Shear flow 반응기로 확장시켜 Si 오염입자가 생성특성을 연구하였다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.1
• /
• pp.63-69
• /
• 2015

The primary aim of this paper is to evaluate the probabilistic fatigue crack propagation models using the residual of a random variable and to present the probabilistic model fit for the probabilistic fatigue crack growth behavior in Mg-Al-Zn alloys under maximum load conditions. The models used in this study were prepared by applying a random variable to empirical fatigue crack propagation models such as the Paris-Erdogan model, Walker model, Forman model, and modified Forman model. It was verified that the good models for describing the stochastic variation of the fatigue crack propagation behavior in Mg-Al-Zn alloys under maximum load conditions were the 'probabilistic Paris-Erdogan model' and 'probabilistic Walker model'. The influence of the maximum load conditions on the stochastic variation of fatigue crack growth is also considered.

• Journal of Digital Convergence
• /
• v.16 no.6
• /
• pp.85-93
• /
• 2018

The Latent Growth Modeling(LGM) is known as the arising analysis method of longitudinal data and it could be classified into unconditional model and conditional model. Unconditional model requires estimated value of intercept and slope to complete a model of fitness. However, the existing LGM is in absence of a structured methodology to estimate slope when longitudinal data is neither simple linear function nor the pre-defined function. This study used Sequential Pattern of Association Rule Mining to calculate slope of unconditional model. The applied dataset is 'the Youth Panel 2001-2006' from Korea Employment Information Service. The proposed methodology was able to identify increasing fitness of the model comparing to the existing simple linear function and visualizing process of slope estimation.

• Journal of Food Hygiene and Safety
• /
• v.26 no.2
• /
• pp.120-124
• /
• 2011

Predictive mathematical models were developed for predicting the kinetics of growth of Listeria monocytogenes in smoked salmon, which is the popular ready-to-eat foods in the world, as a function of temperature (4, 10, 20 and $30^{\circ}C$). At these storage temperature, the primary growth curve fit well ($r^2$=0.989~0.996) to a Gompertz equation to obtain specific growth rate (SGR) and lag time (LT). The Polynomial model for natural logarithm transformation of the SGR and LT as a function of temperature was obtained by nonlinear regression (Prism, version 4.0, GraphPad Software). Results indicate L. monocytogenes growth was affected by temperature mainly, and SGR model equation is $365.3-31.94^*Temperature+0.6661^*Temperature^{\wedge^2}$ and LT model equation is $0.1162-0.01674^*Temperature+0.0009303^*Temperature{\wedge^2}$. As storage temperature decreased $30^{\circ}C$ to $4^{\circ}C$, SGR decreased and LT increased respectively. Polynomial model was identified as appropriate secondary model for SGR and LT on the basis of most statistical indices such as bias factor (1.01 by SGR, 1.55 by LT) and accuracy factor (1.03 by SGR, 1.58 by LT).

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.1 no.1
• /
• pp.74-81
• /
• 1991

The temperature profile of Czochralski single crystal growth system was simulated considering the fluid flow and surface radiation heat transfer. View factors of surface elements were calculated for radiation heat transfer. Two phases(solid and liquid) were treated as a continuous phase by assigning artificial large viscosity to the solid phase and latent heat was accounted by iterative heat revolution method. The solidification model was applied to solid front of the pure Ga during the melting to verify the model. The whole simulation model of CZ system was applied to the growth Al single crystal.

• Proceedings of the Korea Technology Innovation Society Conference
• /
• 2017.11a
• /
• pp.1075-1075
• /
• 2017

기업의 성장동력 전략으로 내부 개발역량에 의존하는 자생적/유기적(Organic Growth) 방식과 전략적 제휴나 인수/합병을 통해 외부 자원을 활용하는 비유기적 성장(Inorganic Growth) 방식을 나눌수 있다. 하지만 이러한 혁신전략 안에는 성공과 실패가 공존하고 있으며 특히 최근에는 조직내 혁신을 달성하기 위해 연구 및 개발, 상용화에 이르기까지 혁신 과정을 개방하여, 외부 자원을 적극활용함으로써 혁신의 비용을 줄이고 성공가능성을 높여 부가가치 창출을 극대화하는 혁신활동중 하나로 개방형혁신(Open innovation)을 많이 활용 하고 있다. 하지만 더 나아가 사업의 지속 가능한 성장을 위해서는 External Organic Innovation을 같이 활용하는 새로운 혁신전략 활동 전개가 필요하다. 그래서 본 연구에서는 이러한 혁신 전략들의 성공-실패 사례분석을 통해 4차 산업혁명시대에 맞는 혁신전략을 살펴보고자 한다.

• Journal of Korea Society of Industrial Information Systems
• /
• v.25 no.1
• /
• pp.71-87
• /
• 2020

As startup companies are recognized as the important source of job creation and economic growth, the study is trying to find out the current situation of startup companies and their success factors in South Korea. The study analyzes the success factor of Woowa Brothers recognized as a unicorn start-up company in 2018 by using ERIS model and Start-up Developmental Stages. The ERIS model emphasizes Entrepreneurs, Resources, Industry Environment and Strategy for company performance and three developmental stages are divided into initiation, commercial and growth stages. The results indicate that the Woowa Brothers' success factor was to catch the appropriate timing in ERIS and to combine unique methods by differentiating itself from existing competitors at each stage. With analyses of success factor of Woowa Brothers as a case model, the study reveals limitations and recommends the direction of future research for producing more unicorn companies in South Korea.

• Industry Promotion Research
• /
• v.6 no.4
• /
• pp.11-21
• /
• 2021

This study tried to analyze the factors of corporate growth potential of CJ E&M, a representative company in the content industry. First, in order to analyze CJ E&M's growth Engine, Michael Porter's diamond model was used to review key factors, and then, based on the 4P model, directions for future corporate growth were suggested. As a Result, Factors behind corporate growth included "Media content of various genres" and "recruitment of star-class human resources", in terms of Production Conditions, and "Gratification Chinese market demand" in terms of Demand Conditions. In addition, "Korean wave industry aiming at K-Culture" in terms of Related Industry and "Two track strategy: global·glocal strategy" and "Media commerce strategy" in terms of business environment: strategy, structure, and competition was able to analyze. For the direction of development, there are "various products through collaboration of affiliated companies" in terms of Product and "TVING Benchmarked Netflix" in terms of Price. In addition, "global expansion through OTT platform TVING" in terms of place and "challenge marketing utilizing the Tiktok platform" in terms of promotion must be carried out.

• Proceedings of the KWS Conference
• /
• v.43
• /
• pp.130-132
• /
• 2004

석출물의 용해 온도보다 낮은 온도에서의 석출물의 야금학적인 거동을 예측하였다. 평균 사이즈 석출물의 지속적인 성장만을 고려하는 기존의 모델과 달리, 본 연구에서 제안된 모델의 경우에는, Gibbs-Thomson equation으로부터 유도되는 critical particle size를 고려하였다. 제안된 모델을 이용해서 TiN석출물의 거동을 예측하였으며, 이를 실험 결과 및 기존의 모델에 의한 예측 값과 비교하였다. 석출물들의 분포는 전형적인 log-normal 분포를 따르는 것으로 관찰되었으며, 본 연구에서 제안된 모델이 기존의 모델에 비해서 실험결과와 잘 일치함을 확인할 수 있었다.

• Proceedings of the KWS Conference
• /
• 2010.05a
• /
• pp.1-10
• /
• 2010

강재의 구조화에 필수적인 용접 공정 후의 저합금강 용접 열영향부 미세조직 및 재질 예측을 위해 가열 중 상변태 거동에 미치는 초기 결정립 크기의 영향, 석출물-free 오스테나이트 결정립 성장 예측 모델, 임계 석출물 크기의 영향을 고려한 용접 열영향부 석출물 조대화 예측 모델, 석출물의 Kinetics을 고려한 결정립 성장 모델, 초기 오스테나이트 결정립크기 및 냉각 속도의 영향을 고려한 용접 열영향부 상변태 모델, 용접 열영향부 경도 예측 모델 등에 대해 연구를 수행하였다. 이를 통해 작성된 최종 모델은 실 용접부와의 비교를 통해 신뢰성을 확인하였으며, 저합금강 용접 열영향부의 미세조직과 경도값을 잘 예측하는 것으로 판단된다. 따라서 본 연구를 통해 작성된 모델을 통하여 용접 열영향부에서의 용접부 품질을 확인하기 위한 시간적, 경제적 비용을 절감할 수 있을 것으로 기대된다.