• Korean Journal of Remote Sensing
• /
• v.34 no.6_3
• /
• pp.1457-1468
• /
• 2018

The sigma naught (${\sigma}^0$) equation is essential to calculate geo-physical properties from Synthetic Aperture Radar (SAR) images for the applications such as ground target identification,surface classification, sea wind speed calculation, and soil moisture estimation. In this paper, we are suggesting new Kompsat-5 (K5) Radar Cross Section (RCS) and ${\sigma}^0$ equations reflecting the final SAR processor update and absolute radiometric calibration in order to increase the application of K5 SAR images. Firstly, we analyzed the accuracy of the K5 RCS equation by using trihedral corner reflectors installed in the Kompsat calibration site in Mongolia. The average difference between the calculated values using RCS equation and the measured values with K5 SAR processor was about $0.2dBm^2$ for Spotlight and Stripmap imaging modes. In addition, the verification of the K5 ${\sigma}^0$ equation was carried out using the TerraSAR-X (TSX) and Sentinel-1A (S-1A) SAR images over Amazon rainforest, where the backscattering characteristics are not significantly affected by the seasonal change. The calculated ${\sigma}^0$ difference between K5 and TSX/S-1A was less than 0.6 dB. Considering the K5 absolute radiometric accuracy requirement, which is 2.0 dB ($1{\sigma}$), the average difference of $0.2dBm^2$ for RCS equation and the maximum difference of 0.6 dB for ${\sigma}^0$ equation show that the accuracies of the suggested equations are relatively high. In the future, the validity of the suggested RCS and ${\sigma}^0$ equations is expected to be verified through the application such as sea wind speed calculation, where quantitative analysis is possible.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.20 no.4
• /
• pp.296-304
• /
• 2018

The objective of this study was to analyze the impact of climate change on rice yield and quality. Experiments were conducted using SPAR(Soil-Plant-Atmosphere-Research) chambers, which was designed to create virtual future climate conditions, in the National Institute of Crop Science, Jeonju, Korea, in 2016. In the future climate conditions($+2.8^{\circ}C$ temp, 580 ppm $CO_2$) of year 2051~2060 according to RCP 8.5 scenario, elevated temperature and $CO_2$ accelerated the heading date by about five days than the present climate conditions, resulted in a high temperature environment during grain filling stage. Rice yield decreased sharply in the future climate conditions due to the high temperature induced poor ripening. And the spikelet numbers, ripening ratio, and 1000-grain weight of brown rice were significantly decreased compared to control. The rice grain quality was also decreased sharply, especially due to the increased immature grains. In the future climate conditions, expression of starch biosynthesis-related genes such as granule-bound starch synthase(GBSSI, GBSSII, SSIIa, SSIIb, SSIIIa), starch branching enzyme(BEIIb) and ADP-glucose pyrophosphorylase(AGPS1, AGPS2, AGPL2) were repressed in developing seeds, whereas starch degradation related genes such as ${\alpha}-amylase$(Amy1C, Amy3D, Amy3E) were induced. These results suggest that the reduction in yield and quality of rice in the future climate conditions is likely caused mainly by the poor grain filling by high temperature. Therefore, it is suggested to develop tolerant cultivars to high temperature during grain filling period and a new cropping system in order to ensure a high quality of rice in the future climate conditions.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.34 no.4
• /
• pp.297-305
• /
• 2018

Purpose: This study aimed to analyze stress distribution and maximum von Mises stress generated in intracoronal restorations and in tooth structures of mandibular molars with various types of cavity designs and materials. Materials and Methods: Three-dimensional solid models of mandible molar such as O inlay cavity with composite and gold (OR-C, OG-C), MO inlay cavity with composite and gold (MR-C, MG-C), and minimal invasive cavity on occlusal and proximal surfaces (OR-M, MR-M) were designed. To simulate masticatory force, static axial load with total force of 200 N was applied on the tooth at 10 occlusal contact points. A finite element analysis was performed to predict stress distribution generated by occlusal loading. Results: Restorations with minimal cavity design generated significantly lower values of von Mises stress (OR-M model: 26.8 MPa; MR-M model: 72.7 MPa) compared to those with conventional cavity design (341.9 MPa to 397.2 MPa). In tooth structure, magnitudes of maximum von Mises stresses were similar among models with conventional design (372.8 - 412.9 MPa) and models with minimal cavity design (361.1 - 384.4 MPa). Conclusion: Minimal invasive models generated smaller maximum von Mises stresses within restorations. Within the enamel, similar maximum von Mises stresses were observed for models with minimal cavity design and those with conventional design.

• The Journal of the Korea Contents Association
• /
• v.19 no.2
• /
• pp.477-490
• /
• 2019

This study analyzes the process of overcoming prejudice and discrimination experiences of mothers with disabilities and looks for improvement points. It is interviewed 9 mothers of children with disabilities who were experiencing prejudice and discrimination while raising children with disabilities. The data collection was conducted from October to November, 2018 and one by on one in depth interview by using semi - structured questionnaires. Data analysis was done through consensual qualitative research (CQR). The result of CQR while it is a experiencing the process of prejudice and discrimination as well as coping the raising disabled children. 'Prejudice and discrimination experience of mothers with disabilities' and 'overcoming of discrimination experiences of mothers with disabilities' were derived. And the seven sub-regions, 28 categories, were finally constructed. The results of the study are as follows. Firstly, Prejudice and discrimination experiences of mothers with disabilities in raising children with disabilities are view of looking at children with disabilities comparing to those of normal children and children with disabilities. It seems that they want to treat the disabled child as the general child with an attitude of understanding and accepting the disabled child rather than looking at the disabled child with wrong perception, prejudice, stereotypes and rejection. Secondly, The process of overcoming the discrimination experiences of the mother of the disabled child is strengthening the cohesion and cohesion within the family in the process of accepting and coping with the disability family of the child with disabilities even if they raise the child with disability and have difficulties such as recognition bias and discrimination of the general public. Based on the results of this study, we suggested practical and policy implications for the mother's psychological stability of the child with disability and the disabled child's healthy life.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.34 no.4
• /
• pp.270-279
• /
• 2018

Purpose: The aim of this study was to assess the patients' perception, acceptance, and preference of the difference between a conventional impression and digital impression through questionnaire survey. Materials and Methods: Thirteen (6 male, 7 female) subjects who experienced both digital and conventional impression at the same day were enrolled in this study. Conventional impression were taken with polyvinylsiloxane and digital impression were performed using a newly developed intra-oral scanner. Immediately after the two impressions were made, a survey was conducted with the standardized questionnaires consisting of the following three categories; 1) general dental treatment 2) satisfaction of conventional impression 3) satisfaction of digital impression. The perceived source of satisfaction was evaluated using Likert scale. The distribution of the answers was assessed by percentages and statistical analyses were performed with the paired t-test, and P < 0.05 was considered significant. Results: There were significant differences of the overall satisfaction between two impression methods (P < 0.05). Digital impression showed high satisfaction in less shortness of breath and odor to participants compared to conventional impression. The use of an oral scanner resulted in a discomfort of TMJ due to prolonged mouth opening and in lower score of the scanner tip size. Conclusion: It was confirmed that the preference for the digital impression using intraoral scanner is higher than the conventional impression. Most survey participants said they would recommend the digital impression to others and said they preferred it for future prosthetic treatment.

• Korean Journal of Poultry Science
• /
• v.46 no.1
• /
• pp.31-37
• /
• 2019

A chicken clathrin-associated adaptor protein $3-{\delta}$ subunit 2 (AP3S2) is a subunit of AP3, which is involved in cargo protein trafficking to target membrane with clathrin-coated vesicles. AP3S2 may play a role in virus entry into host cells through clathrin-dependent endocytosis. AP3S2 is also known to participate in metabolic disease developments of progressions, such as liver fibrosis with hepatitis C virus infection and type 2 diabetes mellitus. Chicken AP3S2 (chAP3S2) gene was originally identified as one of the differentially expressed genes (DEGs) in chicken kidney which was fed with different calcium doses. This study aims to characterize the molecular characteristics, gene expression patterns, and transcriptional regulation of chAP3S2 in response to the stimulation of Toll-like receptor 3 (TLR3) to understand the involvement of chAP3S2 in metabolic disease in chicken. As a result, the structure prediction of chAP3S2 gene revealed that the gene is highly conserved among AP3S2 orthologs from other species. Evolutionarily, it was suggested that chAP3S2 is relatively closely related to zebrafish, and fairly far from mammal AP3S2. The transcriptional profile revealed that chAP3S2 gene was highly expressed in chicken lung and spleen tissues, and under the stimulation of poly (I:C), the chAP3S2 expression was down-regulated in DF-1 cells (P<0.05). However, the presence of the transcriptional inhibitors, BAY 11-7085 (Bay) as an inhibitor for nuclear factor ${\kappa}B$ ($NF{\kappa}B$) or Tanshinone IIA (Tan-II) as an inhibitor for activated protein 1 (AP-1), did not affect the expressional level of chAP3S2, suggesting that these transcription factors might be dispensable for TLR3 mediated repression. These results suggest that chAP3S2 gene may play a significant role against viral infection and be involved in TLR3 signaling pathway. Further study about the transcriptional regulation of chAP3S2 in TLR3 pathways and the mechanism of chAP3S2 upon virus entry shall be needed.

• Journal of Life Science
• /
• v.28 no.12
• /
• pp.1507-1515
• /
• 2018

Benign prostatic hyperplasia (BPH) is characterized by prostatic hypertrophy mainly in the elderly. Corni Fructus is reportedly effective in the prevention and treatment of various diseases, but its efficacy on BPH has not been previously studied. In the present study, we investigated whether or not a Corni Fructus water extract (CF) could prevent testosterone-induced prostatic hyperplasia in rats. To induce BPH, castrated rats were subcutaneously injected with testosterone propionate (TP). CF was administered daily by oral gavage, along with the TP injections, and finasteride, a selective inhibitor of $5{\alpha}$-reductase type 2, was used as a positive control. The results show that CF significantly reduces prostate weight and histopathologic changes while also decreasing levels of serum dihydrotestosterone, similar to the finasteride-treated group. CF also suppresses TP-induced $5{\alpha}$-reductase expression and concentration in prostate tissue and serum, respectively. Furthermore, CF markedly inhibited TP-induced expression of the androgen receptor (AR) and the steroid receptor coactivator 1, an AR coactivator, which was associated with a decrease in prostate-specific antigen levels in both serum and prostate tissue. In conclusion, the results of this study indicate that CF weakens BPH status by inactivation of $5{\alpha}$-reductase and AR.

• Korean Journal of Organic Agriculture
• /
• v.27 no.1
• /
• pp.33-44
• /
• 2019

This study was initiated to find possibility of substitute of gibberellin acid and to prevent negative girdling effect such as slow growth of 'Niitaka' (Pyrus pyrifolia Nakai) trees, a major pear cultivar, at harvest and at 60-, 90-, and 120-d after storage. Seasonal wiring with 3.0-mm-diameter were applied on the main branch at 70, 80, 90, 110, and 130 days after full bloom (DAF) to compare the fruit quality and storability. Fruit weight and sugar contents were the greatly increased by the wiring treatment at 110 DAF, with the lowest values observed for the wiring at 70 DAF. All the wiring treatments reduced fruit acidity but did not affect fruit firmness. a-value on fruit skin was the highest for wiring at 110 DAF and 130 DAF, advancing fruit ripening. The lowest fruit weight loss was occurred at wiring at 110 DAF. a-value on fruit skin was the highest for wiring at 90 DAF and 110 DAF. Wiring at 80 DAF the most increased floral bud diameter, resulting in the lowest L:D ratio of 1.74 observed. As for the mineral nutrients concentrations of floral buds, the concentration of K (0.63%) and Mg (0.31%) were the highest after 80 DAF wiring treatment, whereas Ca and P concentrations did not differ among treatment plots. The leaf K concentrations was the highest in the 130-day wiring treatment (0.76%) and in the control plot (0.78%), whereas there was no significant difference in the concentrations of either Ca or P among treatment plots. Short periods of wiring increased foliar Mg concentrations. In floral buds, carbohydrates showed a tendency for accumulating at a lower concentrations (7.75%) after 70 DAF wiring treatment, which was a relatively short treatment period. On the other hand, the carbohydrate concentrations in leaves showed a tendency for accumulating at lower concentrations after 130 DAF wiring treatment (2.51%), which is a long treatment period, and in the control plot (2.43%). Wiring increased the size and sugar content of fruits, and influenced fruit storability. For the wiring treatment period was delayed, the carbohydrate concentration in flower buds showed curvilinear correlation and the negative correlation with the carbohydrate in leaf tissue.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.20 no.4
• /
• pp.277-283
• /
• 2018

The crop growth model has been widely used for climate change impact assessment. Crop growth model require genetic coefficients for simulating growth and yield. In order to determine the genetic coefficients, regional growth monitoring data or yield trial data of crops has been used to calibrate crop growth model. The aim of this study is to verify that yield trial data of corn is appropriate to calibrate genetic coefficients of CERES-MAIZE. Field experiment sites were Suwon, Jinju, Daegu and Changwon. The distance from the weather station to the experimental field were from 1.3km to 27km. Genetic coefficients calibrated by yield trial data showed good performance in silking day. The genetic coefficients associated with silking are determined only by temperature. In CERES-MAIZE model, precipitation or irrigation does not have a significant effect on phenology related genetic coefficients. Although the effective distance of the temperature could vary depending on the terrain, reliable genetic coefficients were obtained in this study even when a weather observation site was within a maximum of 27 km. Therefore, it is possible to estimate the genetic coefficients by yield trial data in study area. However, the yield-related genetic coefficients did not show good results. These results were caused by simulating the water stress without accurate information on irrigation or rainfall. The yield trial reports have not had accurate information on irrigation timing and volume. In order to obtain significant precipitation data, the distance between experimental field and weather station should be closer to that of the temperature measurement. However, the experimental fields in this study was not close enough to the weather station. Therefore, When determining the genetic coefficients of regional corn yield trial data, it may be appropriate to calibrate only genetic coefficients related to phenology.

• Journal of agricultural medicine and community health
• /
• v.43 no.4
• /
• pp.234-249
• /
• 2018

This study was performed to identify the impact of awareness and educational experiences on cardiopulmonary resuscitation in the ability to execute of cardiopulmonary resuscitation among Korean adults. This study used original data of 2014 Community Health Data Survey. 228,712 participants in this survey were resident in South Korea who is aged 19 or older on July 2014. Participants in this survey were sampled an average of 900 residents(target error ${\pm}3percent$) per community health center of Korea. Data were analyzed by using R 3.1.3 employing chi-squared test, fisher's exact analysis, and logistic regression analysis. Ability to execute CPR was significantly higher in males(3.34 time), higher the education level (1.61 times), the white color occupation (1.14 times), the higher the income level (1.07 times), the higher the education level (0.91 times), non-hypertensive patients (1.12 times), non-diabetic patients (1.16 times), non-dyslipidemic patients (0.86 times), non-stroke patients (0.30 times), CPR education experience group (3.25 times), CPR experience group with manikin-based training (4.30 times), higher subjective health status (1.08 times, 1.16 times) respectively. This study identified that awareness, educational experience, and mannequin-based learning experience of CPR impacted on the ability to execute CPR. Responding to education-related factors could contribute to reducing the rate of out-of-hospital acute cardiac arrest by improving the ability to execute CPR of the general public.