• Journal of Naturopathy
• /
• v.11 no.2
• /
• pp.100-108
• /
• 2022

Background: It has been reported that various substances exist in wild Conyza canadensis, but I think that the overall compositional analysis is still insufficient. Purposes: This study was to set extraction conditions and search for various nutritional components in the wild C. canadensis. Methods: Various extracts were extracted and analyzed using different analytical instruments to suggest and study the conditions for component analysis. Results: As for the general nutritional components of C. canadensis leaf extract, carbohydrates were 46.4%, crude protein 26.5%, moisture 16.3%, raw meal 9.5%, and natural fat 1.2%. The dietary fiber content was 30.76%. Free fructose, glucose, sucrose, and maltose were separated, and the amount of fructose was as high as 4,144.2 mg/100 g. In addition, we found 64.87 mg/g of K, 4.09 mg/g of P, 1.77 mg/g of Mg, and 0.16 mg/g of disodium in the extracts. A total of 20 fatty acids have appeared. In addition, unsaturated fatty acids (octadecenoic acid, octadecadienoic acid, and linolenic acid) were detected. Linolenic acid was high at 54.1%. The saturated fatty acid content was 0.39 g/100 g, and the trans fatty acid content was 0.01 g/100 g. No cholesterol was found in the plant. Riboflavin was at 0.4 mg/100 g, with six essential amino acids and 24 amino acids. Conclusions: As a result of the primary research on the plant, various nutritional and functional ingredients exist in the extract, and natural healing uses are available.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.36 no.4
• /
• pp.360-365
• /
• 1991

This experiment was conducted to determine mechanized seeding ability of barley drill seeder on the seeding time, growth and yield of sorghum-sudangrass hybrid. The time required for machine drill seeding was 42 minutes per l0a which was one-thirteenth of the time required by the manual drill seeding, and percentage of seedling establishment by machine drill seeding was better than that of manual drill seeding. Leaf area index in seeding rate with 30 x 5cm and 40 x 5cm of machine drill seeding was higher than those of manual drill seeding, the leaf distribution was better and the total nonstructural carbohydrate content of stubble after cutting was short increased than that of manual drill seeding, Content of feed composition was not significantly different between manual and machine drill seeding. At seeding rate of 40 x 5cm of machine seeding. dry matter and TDN yield were increased to 29% and 30% respectiyely, than those of manual drill seeding.

• Journal of the Korea Concrete Institute
• /
• v.19 no.1
• /
• pp.121-130
• /
• 2007

To investigate the enhancement in strength and deformation capacities of concrete confined by FRP composites, tests under axial loads were carried out on three groups of thirty six short columns in circular section with diverse GFRP confining reinforcement. The major test variables considered include fiber content or orientation, wrap or tube type by varying the end loading condition, and continuous or discontinuous confinement depending on the presence of vortical spices between its two halves. The circumferential FRP strains at failure for different types of confinements were also investigated with emphasis. Various analytical models capable of predicting the ultimate strength and strain of the confined concrete were examined by comparing to observed results. Tests results showed that FRP wraps or tubes provide the substantial increase in strength and deformation, while partial wraps comprising the vertical discontinuities fail in an explosive manner with less increase in strength, particularly in deformation. A bilinear stress-strain response was observed throughout all tests with some variations of strain hardening. The failure hoop strains measured on the FRP surface were less than those obtained from the tensile coupons in all tests with a high degree of variation. In overall, existing predictive equations overestimated ultimate strengths and strains observed in present tests, with a much larger scatter related to the latter. For more accuracy, two simple design- oriented equations correlated with present tests are proposed. The strength equation was derived using the Mohr-Coulomb failure criterion, whereas the strain equation was based on entirely fitting of test data including the unconfined concrete strength as one of governing factors.

• The Journal of Korean Medicine
• /
• v.18 no.1
• /
• pp.480-498
• /
• 1997

This study was to investigate the protective and anticirrhotic effects of Mockhyangjokisan and Haewooljoweetang on the liver cirrhosis or fibrosis induced by prolonged bile duct ligation; a new experimental model for cirrhosis and the intraperitoneal injection of dimethylnitrosamine in the rat. The development of fibrosis or cirrhosis and its inhibition by the two prescriptions were examined by the chemical analysis of AST, ALT, and hydroxyproline. The results obtained were as follows. 1. The increase of serum asparate aminotransferase induced by bile duct ligation was inhibited by the administration of Mockhyangjokisan and Haewooljoweetang extract. 2. The increase of serum alanine aminotransferase induced by bile duct ligation was inhibited by the administration of Mockhyangjokisan and Haewooljoweetang extract. 3. The increased level of serum AST and AL T induced by the intraperitoneal injection of dimethylnitrosamine was inhibited by the administration of Mockhyangjokisan and Haewooljoweetang extract. 4. The increasing level of hydroxyproline volume in the damaged liver tissues in the rat was decreased by the oral administration of Mockhyangjokisan and Haewooljoweetang extract. But there were no significant differences in the inhibition rate between the two experimental groups.

• Journal of Animal Science and Technology
• /
• v.46 no.2
• /
• pp.227-234
• /
• 2004

This experiment was conducted at Cheonan Yonam Experimental Livestock Farm in 2001-2002 to detennine the effect of harvest date(20 April, 26 April and 4 May) on forage yield and quality of rye varieties of three different maturing groups(early maturing variety = ‘Koolgrazer’ midseason maturing variety = ‘Horni122’ and late maturing variety = ‘Danko’). The heading date of Kooigrazer, Hornil22 and Danko were 17, 22 and 29 April, respectively. Dry matter percentage increased from 15.6 to 21.6% as the harvest date was delayed from April 20 to May 4. Among the rye varieties tested, dry matter percentage of Koolgrazer, Hornil22 and Danko were 20.9, 18.8 and 16.3%, respectively. Dry matter yield increased from 1l.2 to 13.9 ton/ha as the harvest date was delayed, but no significant difference among rye varieties. As the harvest date was delayed, total digestible nutrients(TDN) yield also increased significantly from 7.4 to 8.4 ton/ha However no significant difference was found among rye varieties. Crude protein(CP) percentage decreased from 20.3 to 17.1% as the harvest date was delayed, and CP percentage of late maturing variety, Danko, was significantly higher than that of the other varieties. In content of fiber component(NDF, ADF, ADL, hemicellulose and cellulose) of rye, the late harvest date(4 May) showed the highest among harvest dates. From comparisoo within rye varieties tested, Kooigrazer, a early maturing variety had higher than a rnidseason and late maturing varieties, Hornill22 and Danko. The cellulase digestible of organic matter of dry matter(CDOMD) decreased as the harvest date was delayed. Among the rye varieties tested, the CDOMD of a early maturing variety, Koolgrazer was the lowest. Our study differences of winter rye in forage yield and quality resulting from variety maturity and harvest stage. A early maturing variety, Kooigrazer should be harvested between 24 and 28 April, Hamill 22(midseason maturing variety) harvested between 29 April and 3 May, Danko(late maturing variety) harvested between 4 and 8 May for maximum forage yield and optimum quality.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.8
• /
• pp.29-37
• /
• 2019

Textile quality management targets the physical properties of fabrics and the subjective discriminations of color and fitting. Color is the most representative quality factor that consumers can use to evaluate quality levels without any instruments. For this reason, quantification using a color discrimination device has been used for statistical quality management in the textile industry. However, small and medium-sized domestic textile manufacturers use only visual inspection for color discrimination. As a result, color discrimination is different based on the inspectors' individual tendencies and work procedures. In this research, we want to develop a textile industry-friendly quality management method, evaluating the possibility of rapid color discrimination using a digital imaging device, which is one of the office-automation instruments. The results show that an imaging process-based color discrimination method is highly correlated with conventional color discrimination instruments ($R^2=0.969$), and is also applicable to field discrimination of the manufacturing process, or for different lots. Moreover, it is possible to recognize quality management factors by analyzing color components, ${\Delta}L$, ${\Delta}a$, ${\Delta}b$. We hope that our rapid discrimination method will be a substitute technique for conventional color discrimination instruments via elaboration and optimization.

• Korean Journal of Heritage: History & Science
• /
• v.46 no.3
• /
• pp.230-250
• /
• 2013

possessed by Dong-A University Museum is designated as Treasure No. 595, and has been known for a more exquisite, delicate and realistic expression and a colorful three-dimensional structure compared to the 'grass and insect painting' work and its value in art history. However, it has not been analyzed and studied in fabric craft despite it being an embroidered work. This study used scientific devices to examine and analyze the Screen's fabric, thread colors, and embroidery techniques to clarify its patterns and fabric craft characteristics for its value in the history of fabric craft. As a result, consists of eight sides and its subject matters and composition are similar to those of the general paintings of grass and insects. The patterns on each side of the 'grass and insect painting' include cucumber, cockscomb, day lily, balsam pear, gillyflower, watermelon, eggplant, and chrysanthemums from the first side. Among these flowers, the balsam pear is a special material not found in the existing paintings of grass and insect. The eighth side only has the chrysanthemums with no insects and reptiles, making it different from the typical forms of the paintings of grass and insect. The fabric of the Screen uses black that is not seen in other decorative embroideries to emphasize and maximize various colors of threads. The fabric used the weave structure of 5-end satin called Gong Dan [non-patterned satin]. The threads used extremely slightly twisted threads that are incidentally twisted. Some threads use one color, while other threads use two or mixed colors in combination for three-dimensional expressions. Because the threads are severely deterioration and faded, it is impossible to know the original colors, but the most frequently used colors are yellow to green and other colors remaining relatively prominently are blue, grown, and violet. The colors of day lily, gillyflower, and strawberries are currently remaining as reddish yellow, but it is anticipated that they were originally orange and red considering the existing paintings of grass and insects. The embroidery technique was mostly surface satin stitch to fill the surfaces. This shows the traditional women's wisdom to reduce the waste of color threads. Satin stitch is a relatively simple embroidery technique for decorating a surface, but it uses various color threads and divides the surfaces for combined vertical, horizontal, and diagonal stitches or for the combination of long and short stitches for various textures and the sense of volume. The bodies of insects use the combination of buttonhole stitch, outline stitch, and satin stitch for three-dimensional expressions, but the use of buttonhole stitch is particularly noticeable. In addition to that, decorative stitches were used to give volume to the leaves and surface pine needle stitches were done on the scouring rush to add more realistic texture. Decorative stitches were added on top of gillyflower, strawberries, and cucumbers for a more delicate touch. is valuable in the history of paintings and art and bears great importance in the history of Korean embroidery as it uses outstanding technique and colors of Korea to express the Shin Sa-im-dang's 'Grass and Insect Painting'.

• Journal of Korea Port Economic Association
• /
• v.31 no.4
• /
• pp.75-89
• /
• 2015

This study examines 31 import and export cargo items handled in each port to investigate which items face the most competition among the ports and how many of them are transited to other ports. The study aims to suggest implications for the future port policy of Incheon Port. It was found that the volume concentration in the Western Coast region from 2005 to 2014 became increasingly decentralized. The decentralization began in earnest in 2009 in particular, and the value was 0.448 in 2014, indicating fierce competition among the regions. According to the static and dynamic positioning analyses results for Incheon Port, Pyeongtaek and Dangjin Port, and Gunsan Port, using BCG Matrix, the static positioning analysis showed that Incheon Port belongs to the 3rd quadrant (Cash Cows), Pyeongtaek and Dangjin Port belongs to the 2nd quadrant (Question Marks), and Gunsan Port belongs to the (Dogs) group. This implies that Incheon Port has maintained its position with large shares compared to those of other ports, despite its low growth rate. However, the market position and growth rate of Incheon Port decreased according to the dynamic positioning analysis results. The shift-share analysis results indicated that the volumes of Incheon Port and Gunsan Port were shifting to Pyeongtaek and Dangjin Port. Moreover, the ratio of absolute growth to potential growth of Incheon Port and Gunsan Port turned out to be significantly lower than that of Pyeongtaek and Dangjin Port, implying that Incheon Port and Gunsan Port are declining as compared to Pyeongtaek Port and Dangjin Port. According to the LQ index analysis results, specialized items from Incheon Port that do not overlap with other ports included the following ten items: meat, fish and crustaceans, bituminous coals, crude oil and petroleum, petroleum-refined products, plastic rubber and products, textiles, nonferrous metal and products, electric machinery, and aircrafts and ships. In particular, it was confirmed that the bulk cargo of Incheon Port was actually shifting to Pyeongtaek and Dangjin Port following the policy of re-establishing port functions.

• Fire Science and Engineering
• /
• v.15 no.1
• /
• pp.23-33
• /
• 2001

The utility tunnels are the important facility as a mainstay of country because of the latest communication developments. However, the utilities tunnel is difficult to deal with in case of a fire accident. When a cable burns, the black smoke containing poisonous gas will be reduced. This black smoke goes into the tunnel, and makes it difficult to extinguish the fire. Therefore, when there was a fire in the utility tunnel, the central nerves of the country had been paralyzed, such as property damage, communication interruption, in addition to inconvenience for people. This paper is based on the fire occurred in the past, and reenacting the fire by making the real utilities tunnel model. The aim of this paper is the scientific analysis of the character image of the fire, and the verification of each fire protection system whether it works well after process of setting up a fire protection system in the utilities tunnel at a constant temperature. The fire experiment was equipped with the linear heat detector, the fire door, the connection water spray system and the ventilation system in the utilities tunnel. Fixed portion of an electric power supply cable was coated with a fire retardant coating, and a heating tube was covered with a fireproof. The result showed that the highest temperature was $932^{\circ}c$ and the linear heat detector was working at the constant temperature, and it pointed at the place of the fire on the receiving board, and Fixed portion of the electric power supply cable coated with the fire retardant coating did not work as the fireproof. The heating tube was covered with the fireproof about 30 minutes.

• The Korean Journal of Pesticide Science
• /
• v.16 no.4
• /
• pp.343-349
• /
• 2012

Exposure and risk assessments were conducted to evaluate the relative safety of mixing/loading work of indoxacarb between wettable powder (WP) and water dispersible granule (WG). Hand exposure was monitored using cotton gloves while inhalation exposure was measured using personal air monitor. Method validation for the exposure monitoring was established successfully through several experiments. Limit of determination and limit of quantitation were 0.25 and 1 ng, respectively. $R^2$ of calibration curve linearity was more than 0.9999 and reproducibility was 0.7-6. Recovery of indoxacarb from gloves, solid sorbent and glass fiber filter at three different levels was 81.5-108.8%. Trapping efficiency and breakthrough tests gave 981.5-108.8% of recovery. During mixing/loading procedure, hand exposure amount (75 percentile of 30 repetitions) for indoxacarb WP was 6 folds (459.8 mg/kg a.i) than that of WG (81.4 mg/kg a.i). This result indicates that WG has less drift than WP thanks to its granular type of formulation. Inhalation amount was $10^{-8}-10^{-7}%$ of spray mixture prepared and $10^{-4}-10^{-3}%$ of hand exposure. In inhalation case, no significant differences were observed between two formulations. Margin of safety was calculated for risk assessment using male Korean average body weight and acceptable operator exposure level as the important exposure factors. Mixing/loading procedures for both of the formulations were considered to be of least risk because calculated MOS values were more than 1.