• The Journal of the Korea institute of electronic communication sciences
• /
• v.18 no.3
• /
• pp.397-404
• /
• 2023

This paper designs a wind turbine test site based on international regulations for the certification of wind turbine prototypes. The maximum height of the meteorological mast installed at the test site is 140m, and power facilities capable of testing up to three wind turbines of 5MW or more are installed. The weather resources measured at the mast can be recorded and analyzed using a monitoring system. Wind turbine manufacturers can use this test site during the certification period, and the installed wind turbines can be used for continuous power generation projects. Therefore, this test site can provide fundamental data for measuring the long-term performance and durability of wind turbines, which can be used to improve models or develop new wind turbines.

• Journal of the Korean Geotechnical Society
• /
• v.26 no.2
• /
• pp.33-43
• /
• 2010

Geothermal energy is gaining wide attention as a highly efficient renewable energy and being increasingly used for heating/cooling systems of buildings. The standing column well (SCW) is especially efficient, cost-effective, and suitable for Korean geological and hydrological conditions. However, a numerical model that simulates the SCW has not yet been developed and applied in Korea. This paper describes the development of the SCW numerical model using a finite-volume analysis program. The model, through hydro-thermal coupled analyses, simulates heat transfer through advection, convection, and conduction. The accuracy of the model was verified through comparisons with field data measured at SCWs in the U.S. and Korea. Comparisons indicated that the SCW numerical model can closely predict the performance of a SCW. The numerical model was used to perform a comprehensive parametric study in the companion paper.

• Journal of the Korean Institute of Gas
• /
• v.27 no.1
• /
• pp.63-69
• /
• 2023

Although Korea is the world's No. 1 semiconductor producing country, most studies are conducted with risk assessment for simple material risks due to the closedness of the site for industrial protection. In terms of industrial safety, a monitoring system such as a gas detector to determine the leakage of hazardous substances has been established, but research on effectively discharging harmful gastritis substances in case of leakage has only recently begun. Semiconductor manufacturing facilities (gas boxes) where a large amount of flammable materials are handled are currently being safety managed by using a gas detector and blocking the air inlet. It is difficult to dilute in a short time in case of leakage of flammable substances. Therefore, in this study, based on various criteria, the size of the duct according to the size of the gas box is determined and the appropriate size of the air inlet is studied to minimize the exhaust performance requirement without exposing hazardous chemicals to the outside in the event of a flammable leak. We want to do an optimal exhaust design.

• Journal of the Korean Institute of Gas
• /
• v.27 no.1
• /
• pp.13-22
• /
• 2023

As an alternative to environmental pollution generated from fossil fuels currently in use, research is being actively conducted to use hydrogen that does not cause air pollution. As fire and explosion accidents caused by hydrogen leakage have occurred until recently, research on safety is needed to commercialize hydrogen on ships, which are special environments. In this study, a seasonal alternative scenario for each season and the worst scenario were assumed in the event of a leakage accident while a hydrogen fuel cell propulsion ship equipped with a hydrogen storage tank was navigating at JangSaengPo port in Ulsan. In order to consider environmental variables, the damage impact range was derived through ALOHA and probit analysis based on the annual average weather data for 2021 by the Korea Meteorological Administration and on geographic information data from the National Statistical Office. Radiation showed a wider damage range than that of Overpressure and Flame in both the alternative and worst-case scenarios, and as a result of probit analysis, a fatality rate of 99% was confirmed in all areas.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.22 no.6
• /
• pp.51-56
• /
• 2022

With the development of industrialization, the amount of food and waste is rapidly increasing. Accordingly, the government is aware of the seriousness and is making efforts in various ways to reduce it. As a part of that, the volume-based food system was introduced, and although there were several trials and errors at the beginning of the introduction, it shows a reduction effect of 20 to 30%. These results suggest that the volume-based food system is being established. However, the waste is caused by foreign substances in the process of recycling resources by collecting them from the 1st collection to the 2nd collection process. Therefore, in this study, to solve these problems fundamentally, artificial intelligence is applied to classify foreign substances and improve them. Due to the nature of food waste, there is a limit to obtaining many images, so we compare several models based on CNNs and classify them as abnormal data, that is, CNN-based models are trained on various types of foreign substances, and then models with high accuracy are selected. We intend to prepare improvement measures for maintenance, such as manpower input to protect equipment and classify foreign substances by applying it.

• Journal of Korean Society for Quality Management
• /
• v.50 no.1
• /
• pp.153-167
• /
• 2022

Purpose: The purpose of this study is to guide the operation managers who plan daily production of large mass-processing facility that services multi-customers with multi-product, small-batch item characteristics by providing the practical best production quantity and the inventory allowed to build. Methods: Close observation of a subcontract paint-shop operator captured the daily decision process which was reflected in the subcontractor-unique mathematical model and the system dynamics simulation model. Multiple simulations were run to find the practical best production quantity and the maximum allowable stock level of inventory that did not undermine the profit from practical best daily production. Actual data and a few constant values were obtained from the firm under study. Results: While the inventory holding cost for the customer-owned material harms the total profit of the subcontractor, the running cost of the processing facility hinders production in small batches. This balances the maximum possible productions and results in practical best daily production which can be found through simulation runs with actual data. The maximum level of stocked inventory is deduced from the practical best daily production. Conclusion: To build a large volume that enables economy-of-scale production, operators should deal with multi-product small-batch items from multiple customers. When the planned schedule of the time and amount of material in-flow tend not to be reliable, operators can find it practical to execute level production across the planning horizon instead of adjusting to day-to-day in-flow fluctuations.

• The Korean Journal of Franchise Management
• /
• v.2 no.1
• /
• pp.152-172
• /
• 2011

This study aims to analyze the effect of franchisor's pre-open support services on franchisee's relationship quality and performance in foodservice franchise system. The analysis data was collected from 500 franchisees located in Seoul and Gyeonggi-do of Republic of Korea. The finding are as followings: firstly, the factors of information providing, market researching, interior and equipment supporting, education and training supporting, sale and promotion supporting, and legal supporting influence positively franchisee's satisfaction. Second, regarding relationship among relationship quality, satisfaction positively influences trust and commitment, and trust positively influence commitment. Third, relationship quality influences positively both financial and non-financial performance.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2020.11a
• /
• pp.165-166
• /
• 2020

Internationally, manufacturers attempted respectable portion of in-house logistics to satisfy end users and decrease manpower to compete for manufacturing price and quality optimization. Mostly, manufacturers operate variety of facilities such as collaborative robots, conveyor, etc. based on PLC. To achieve it, manufactures shall operate the optimized number of manufacturing processes with logic controlled by computer to reduce human errors. In prior to it, manufacturing industry still own plenty of fields which have not yet been adjusted with automation. For example, we shall put in-house logistics on the issue. This study focuses on manufacturing industry, evaluate efficiency, costs, etc. in all aspects and suggest alternatives by analysis SWAT and OEE, let alone reason of weakness.

• Journal of Korean Society for Quality Management
• /
• v.51 no.2
• /
• pp.315-327
• /
• 2023

Purpose: Recently, research has continued to predict the time of failure of the facility through measurement data obtained by attaching a sensor to the facility. However, depending on the facility, it may be difficult to attach a sensor. The purpose of this study is to propose a power generation maintenance plan system based on failure record data obtained from Continuous Ship Unloader, one of the facilities that is difficult to attach sensors. Methods: This study uses data collected from 2012 to 2022 from the 'CSU-1B' model among Continuous Ship Unloader operated by Korea Midland Power Co., LTD. By fitting fault record data to the Weibull distribution, appropriate maintenance cycles and ranges for each target facility subsystem are derived. In addition, maintenance group between subsystems is selected through Euclidean distance, a metric often used for time series data similarity. Through this, a system for establishing an maintenance plan for power generation facilities is proposed. Results: The results of this study are as follows. For the 17 subsystems of the Continuous Ship Unloader, proper maintenance cycles and ranges were determined, and a total of four maintenance groups were chosen. This resulted in the creation of an power generation maintenance plan system and the establishment of an maintenance plan. Conclusion: This study is a case study of power generation facilities. We proposed a maintenance plan system for Continuous Ship Unloader among power generation facilities.

• Journal of Korea Port Economic Association
• /
• v.39 no.3
• /
• pp.21-32
• /
• 2023

The domestic automobile industry is growing due to favourable government policies and changing technological innovations. As the automobile industry becomes more active, the role of dedicated docks facilitating automobile exports is also becoming prominent which can be identified as a sector still requiring comprehensive research. Accordingly, a case analysis of domestic automobile port productivity was conducted using empirical data collected from Korean automobile ports to compare and analyze their productivity and to present implications based on the findings. In the case of productivity analysis, facility, labor, working time, and cost productivity were calculated from (the beginning of) 2021 to the second quarter of 2022. The results of the analysis revealed the port D to achieve the highest productivity during the study period, followed by the ports B, C, and A, respectively. Based on the current situation of each automobile dock revealed through the results, strategies for future development is derived.