• Korean Journal of Remote Sensing
• /
• v.36 no.6_2
• /
• pp.1509-1521
• /
• 2020

Experiments for validation of surface reflectance produced by Korea Multi-Purpose Satellite (KOMPSAT-3A) were conducted using Chinese Baotou (BTCN) data among four sites of the Radical Calibration Network (RadCalNet), a portal that provides spectrophotometric reflectance measurements. The atmosphere reflectance and surface reflectance products were generated using an extension program of an open-source Orfeo ToolBox (OTB), which was redesigned and implemented to extract those reflectance products in batches. Three image data sets of 2016, 2017, and 2018 were taken into account of the two sensor model variability, ver. 1.4 released in 2017 and ver. 1.5 in 2019, such as gain and offset applied to the absolute atmospheric correction. The results of applying these sensor model variables showed that the reflectance products by ver. 1.4 were relatively well-matched with RadCalNet BTCN data, compared to ones by ver. 1.5. On the other hand, the reflectance products obtained from the Landsat-8 by the USGS LaSRC algorithm and Sentinel-2B images using the SNAP Sen2Cor program were used to quantitatively verify the differences in those of KOMPSAT-3A. Based on the RadCalNet BTCN data, the differences between the surface reflectance of KOMPSAT-3A image were shown to be highly consistent with B band as -0.031 to 0.034, G band as -0.001 to 0.055, R band as -0.072 to 0.037, and NIR band as -0.060 to 0.022. The surface reflectance of KOMPSAT-3A also indicated the accuracy level for further applications, compared to those of Landsat-8 and Sentinel-2B images. The results of this study are meaningful in confirming the applicability of Analysis Ready Data (ARD) to the surface reflectance on high-resolution satellites.

• Korean Chemical Engineering Research
• /
• v.60 no.1
• /
• pp.93-99
• /
• 2022

With the rapid development of ultra-small and wearable device technology, continuous electricity supply without spatiotemporal limitations for driving electronic devices is required. Accordingly, Triboelectric nanogenerator (TENG), which utilizes static electricity generated by the contact and separation of two different materials, is being used as a means of effectively harvesting various types of energy dispersed without complex processes and designs due to its simple principle. However, to apply the TENG to real life, it is necessary to increase the electrical output. In addition, stable generation of electrical output, as well as increase in electrical output, is a task to be solved for the commercialization of TENG. In this study, we proposed a method to not only improve the output of TENG but also to stably represent the improved output. This was solved by using the contact layer, which is one of the components of TENG, as an electret for improved output and stability. The utilized electret was manufactured by sequentially performing corona charging-thermal annealing-corona charging on the Fluorinated ethylene propylene (FEP) film. Electric charges artificially injected due to corona charging enter a deep trap through the thermal annealing, so an electret that minimizes charge escape was fabricated and used in TENG. The output performance of the manufactured electret was verified by measuring the voltage output of the TENG in vertical contact separation mode, and the electret treated to the corona charging showed an output voltage 12 times higher than that of the pristine FEP film. The time and humidity stability of the electret was confirmed by measuring the output voltage of the TENG after exposing the electret to a general external environment and extreme humidity environment. In addition, it was shown that it can be applied to real-life by operating the LED by applying an electret to the clap-TENG with the motif of clap.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.50 no.1
• /
• pp.68-77
• /
• 2022

The human thermal environment in an apartment complex located in Seoul was quantitatively analyzed to devise methods to modify human heat-related stresses in landscape and urban planning. Microclimatic data (air temperature, relative humidity, wind speed, and short- and long-wave radiation) were collected at 6 locations [Apt-center, roof (cement), roof (grass), ground, playground, and a tree-lined road] in the late spring and summer, and the data were used to estimate the human thermal sensation, physiological equivalent temperature (PET) and universal thermal climate index (UTCI). As a result, the playground location had the highest thermal environment, and the roof (grass) location had the lowest. The mean difference between the two locations was 0.8-1.1℃ in air temperature, 1.8-4.0% in relative humidity, and 7.5-8.0℃ in mean radiant temperature. In open space locations, the wind speed was 0.4-0.5 ms-1 higher than others. Also, a wind tunnel effect happened at the Apt-center location during the afternoon. For the human thermal sensation, PET and UTCI, the mean differences between the playground and roof (grass) locations were: 5.2℃ (Max. 11.7℃) in late spring and 5.4℃ (Max. 18.1℃) in summer in PET; and 3.0℃ (Max. 6.1℃) in late spring and 2.6℃ (Max. 9.8℃) in summer in UTCI. The mean differences indicated a level change in PET and 1/2 level in UTCI, and the maximum differences showed greater changes, 2-3 levels in PET, and 1-1.5 levels in UTCI. Moreover, the roof (grass) location gave 4.6℃ PET reduction and a 2.5℃ UTCI reduction in late spring, and a 4.4℃ PET reduction and a 2.0℃ UTCI reduction in the summer when compared with the roof (cement) location, which results in a 2/3 level change in PET and a 1/3 level in UTCI. Green infrastructure locations [roof (grass), ground, and a tree-lined road] were not statistically significant in the reduction of PET and UTCI in thermal environment modifying effects. The implementation of green infrastructure, such as rooftop gardens, grass pavement, and street tree planting, should be adopted in landscape planning and be employed for human thermal environment modification.

• Korean Journal of Optics and Photonics
• /
• v.33 no.4
• /
• pp.167-176
• /
• 2022

Adaptive optics (AO) systems compensate for atmospheric disturbance, especially phase distortion, by introducing counter-wavefront deformation calculated from real-time wavefront sensing or prediction. Because AO system implementations are time-consuming and costly, it is highly desirable to estimate the system's performance during the development of the AO system or its parts. Among several techniques, we mostly apply statistical analysis, computational simulation, and optical-bench tests. Statistical analysis estimates performance based on the sum of performance variances due to all design parameters, but ignores any correlation between them. Computational simulation models every part of an adaptive optics system, including atmospheric disturbance and a closed loop between wavefront sensor and deformable mirror, as close as possible to reality, but there are still some differences between simulation models and reality. The optical-bench test implements an almost identical AO system on an optical bench, to confirm the predictions of the previous methods. We are currently developing an AO system for a 1.6-m ground telescope using a deformable mirror that was recently developed in South Korea. This paper reports the results of the statistical analysis and computer simulation for the system's design and confirmation. For the analysis, we apply the Strehl ratio as the performance criterion, and the median seeing conditions at the Bohyun observatory in Korea. The statistical analysis predicts a Strehl ratio of 0.31. The simulation method similarly reports a slightly larger value of 0.32. During the study, the simulation method exhibits run-to-run variation due to the random nature of atmospheric disturbance, which converges when the simulation time is longer than 0.9 seconds, i.e., approximately 240 times the critical time constant of the applied atmospheric disturbance.

• The Journal of Korean Society for Radiation Therapy
• /
• v.33
• /
• pp.137-144
• /
• 2021

Purpose : The usability of X-Jaw split VMAT was evaluated by comparative analysis of the dose distribution between the treatment plan divided by X-Jaw and Full field VMAT treatment plan in left breast cancer treatment including supraclavicular lymph nodes. Materials and Methods : 10 patients with left breast cancer, including supraclavicular lymph nodes, were simulated using vacuum cushion, and 2 Full field Arc VMAT and 4 X-Jaw split Arc VMAT were planned The treatment plan was designed to include more than 95% of the Planning Target Volume (PTV) and to be minimally irradiated in the surrounding Organ at risk (OAR). Dose analysis of PTV and OAR was performed through dose volume histogram (DVH). Results : The Full field VMAT treatment plan and the X-Jaw split VMAT treatment plan of 10 patients were expressed as average values and compared. The difference between the two treatment plans was not large, with a Conformity index (CI) of 1.05±0.04, 1.04±0.03, and a Homogeneity index (HI) of 1.07±0.008, 1.07±0.009. For OAR, V5 in the left lung is 56.1±6.50%, 50.4±6.30%, and V20 is 20.0±4.15%, 13.52±3.61%. Compared to Full field VMAT, V5 decreased by 10.0% V20 by 32.6% in X-Jaw split VMAT. The V30 of the heart is 3.68±1.85%, 2.23±1.52%, and the Mean dose is 8.93±1.65 Gy, 7.67±1.52 Gy. In the X-Jaw split VMAT, V30 decreased by 39.3% and the Mean dose decreased by 14.1%. The left lung and heart, which are normal tissues, were found to have a statistical significance of that p-value is less than 0.05. Conclusion : In the case of left breast cancer treatment, which includes Supraclavicular lymph nodes with a large PTV volume and a length of X Jaw of 15 cm or more, the X-Jaw split VMAT shows improved dose distribution, which can reduce radiation dose of OAR such as lungs and heart, while maintaining similar PTV coverage with HI and CI equivalent to Full field VMAT. It is thought to be effective in reducing radiation complications.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.16 no.6
• /
• pp.177-196
• /
• 2021

In the era of the 4th industrial revolution, high technology is causing many changes in modern society and economy. Among them, changes in industries and jobs require new competencies of future human resources. As an educational alternative to these changes, maker education and design thinking methods are spreading around the world, and it is necessary to actively apply such education in university curriculum. Therefore, this study examines the effects of the maker education using the design thinking method on the learners' competencies required as future human resources and, relationship between the development of university students' entrepreneurial competencies and learners' competencies. And the purpose of this study is to contribute to the vitalization of entrepreneurship education for university students by suggesting an educational model. For this purpose, this study investigated the prior research on maker education/environment and design thinking methods to examine concepts and characteristics, and analyzed the influences between maker education/environment and design thinking methods and the development of learners' personal, social and technological capabilities. In addition, this study analyzed the relationship between learners' developed capabilities and university students' entrepreneurial capabilities, and based on the results, suggested directions and conceptual models for education that combine maker education/environment and design thinking methods. In conclusion, maker education/environment and design thinking methods in university education have a positive effect on the cognitive, social, and technological development of learners, and this has a significant relationship with the factors of personal, social, and technological dimensions of university students' entrepreneurial competency. It is analyzed that it has a positive effect on the promotion of entrepreneurship activities of university students. Therefore, it is judged that university's interest and support should be given to the vitalization of maker education using the design thinking method for university student entrepreneurship education and future human resources nurturing.

• Korean Journal of Forensic Psychology
• /
• v.13 no.1
• /
• pp.1-22
• /
• 2022

This study tested the effect of the verdict category of lay-participation trial in Korea on the legal decision of layperson and the role of representation of 'innocent' in the process. Representation of 'innocent' refers to a psychological threshold for deciding someone's innocence (no fault or sin) in a general sense. The functions as a threshold for a legal decision of 'beyond a reasonable doubt (BRD)' and the individual threshold (IT), regarded as a standard for judgment of guilt established by law and an estimate of an individual's threshold, respectively, were compared. This study used a 2×2 complete factorial design in which the verdict category (guilty/innocent vs. guilty/not guilty) and the defendant's likelihood of guilt (low vs. high) were manipulated. Data from 137 lay-people who voluntarily participated in the online experiment was analyzed. The experiment's procedure was in the order of measuring 'representation of innocent' and the likelihood of guilt of an accused, presenting one of four trial vignettes, and obtaining legal decisions (verdict confidence and estimation of the likelihood of guilt for the defendant). As a result, it was found that the verdict category did not significantly affect the legal decision of layperson. However, the guilty verdict rate of the 'guilty/innocent' condition tended to be higher than those of the 'guilty/not guilty' condition. The layperson's representation of 'innocent' and the verdict category had an interaction effect on the difference between BRD and IT (threshold change) at the significance level of .1. In the 'guilty/innocent' condition, the threshold change varying with layperson's representation of 'innocent' was larger than in the 'guilty/not guilty' condition. In comparing the function of BRD and IT, IT significantly predicted the lay person's legal decision at the significance level of .1 by interacting with the likelihood of guilt for the defendant. Therefore, it could be said that IT was a better threshold estimator than BRD. The implication of this study is that it provided experimental evidence for the effect of the verdict category of lay-participation trial in Korea, which is a problem often raised among lawyers, and suggested logical reasoning and empirical grounds for the psychological mechanism of the possible effect.

• Journal of Korean Port Research
• /
• v.12 no.1
• /
• pp.35-46
• /
• 1998

The CY can be said to function in various respect as a buffer zone between the maritime and overland inflow-outflow of container. The amount of storage area needed requires a very critical appraisal at pre-operational stage. A container terminal should be designed to handle and store containers in the most efficient and economic way possible. In order to achieve this aim it is necessary to figure out or forecast numbers and types of containers to be handled, CY area required, and internal handling systems to be adopted. This paper aims to calculate the CY area required for each container handling system in Mokpo New Port. The CY area required are directly dependent on the equipment being used and the storage demand. And also the CY area required depends on the dwell time. Furthermore, containers need to be segregated by destination, weight, class, FCL(full container load), LCL(less than container load), direction of travel, and sometimes by type and often by shipping line or service. Thus the full use of a storage area is not always possible as major unbalances and fluctuations in these flow occuring all the time. The calculating CY area must therefore be taken into account in terms of these operational factors. For solving such problem, all these factors have been applied to estimation of CY area in Mokpo New Port. The CY area required in Mokpo New Port was summarized in the conclusion section.

• 한국노년학
• /
• v.31 no.3
• /
• pp.831-848
• /
• 2011

The purpose of this study is to analyse the family caregivers' stress pathways by types of long term care services for the elderly, and then to discuss the findings of analysis. For this research, primary caregivers that provide care the elderly requiring long term care services sanctioned by National Health Insurance Corporation were drawn and surveyed. Among collected data, data for 258 primary caregivers by type of long term care services were used for this study. The results of this study can be summarized as follows. First, on average, the elders that utilize care service in institutions for the elderly were higher proportion of women, older, higher rate of bereavement, more children than the elders that utilize in-home care service, but some cases were vice-versa. Second, the elders that utilize care service in institutions more ADL dependency, higher proportion of severe dementia or severe stroke, higher care rank by National Health Insurance Corporation than the elders that utilize in-home care service on average. Third, primary caregivers with elders that utilize in-home care service were higher proportion of women, older, lower education level, higher rate of spouse and daughter-in-law in relationship with care recipient, less health, lower income than primary caregivers with elders that utilize care service in institutions. Fourth, subjective indicators representing caregivers' reactions to caregiving for the elderly significantly impact on caregivers' stress(ie, depression), and pathway of caregivers' stress are differentiated by type of long term care services. Fifth, stressors that have direct impacts on depression as caregiving family are differentiated by type of long term care services. Therefore, policies or programs to reduce negative mental health or stress of caregivig families should be designed differently by reflecting pathway of various stressors and stress by use types of long term care services for the elderly.

• Asia Marketing Journal
• /
• v.9 no.1
• /
• pp.23-41
• /
• 2007

The current study analyzed the relationship between expression type of humor ads and their advertising effects and the differences in advertising effects by expression type according to temperament as categorized by the Myers-Briggs Type Indicator (MBTI). Expression type of humor was classified into arousal-, incongruity-, and superiority-type humor ads. Advertising effects were measured by consumers' cognitive, affective, and conative responses. Three ads were created based on expression type of humor. A personality type, as measured by the MBTI, was categorized into four types of temperament, namely SP, SJ, NF, NT and used as moderating variables. As a result, the advertising effects varied according to the expression type of humor advertising. Interaction effects between ad expression type and temperament on ad feeling and ad preference were also found.