• Journal of the Korean Institute of Intelligent Systems
• /
• v.20 no.1
• /
• pp.15-20
• /
• 2010

In this paper, we discuss a decentralized observer design problem for the fault detection in the large-scale continuous-time T-S (Takagi-Sugeno) fuzzy system. Since the fault detection residual is desired to be as sensitive as possible, on the fault, we use $\mathfrak{H}_-$ index performance criterion. Sufficient conditions for the existence of such a observer is presented in terms of linear matrix inequalities. Simulation results show the effectiveness of the proposed method.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.12 no.3
• /
• pp.29-36
• /
• 1998

In this paper, We are proposed a design method of the digital PID controller based on the model following method which minimized the error integral of the step response between the control system and the reference model. And we are applied it by a speed control of the current type inverter induction motor. The dynamic characteristic of the system was expressed by the step response, and then the optimal parameter of the PID controller can be easily obtained by the matrix computation. The derived algorithm can be implemented through a simple and systematic design procedure. Finally, We have shown the result with a computer simulation by the present method which proposed the speed control system and stable operation and fairly transient performance. And then tt was found results by experimental process.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.5 no.6
• /
• pp.13-27
• /
• 1997

In the modern design technology, a component should be designed to fit into the overall system performance. A design methodology is developed to expedite the mechan- ical design of complex mechanical systems, The relation between the system design and component design is defined by a top-down approach and the results from the system design are utilized in the component design process. As a design example, an automobile exhaust system is selected for the system design and a bellows is chosen for a component design. Design methodology based on the top-down approach consists of five steps; (1) Analysis of service load, (2) Development of a lumped parameter, (3) Completion of the system design, (4) Selection of the component topology, (5) Completion of the component design, A method using a equivalent matrix is developed in order to determine unknown external forces in linear structural analyses. The bellows is also analyzed by the finite element method using a conical frustum shell element. Various experiments are performed to verify the developed theories. The top-down desi- gn approach is demonstrated by a design case using structural and shape optimization technology. Since the method is relatively simple and easy compared to other methods, it can be applied to the general design where system and component designs are involves simultaneously.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.10 no.6
• /
• pp.866-878
• /
• 1999

In this paper, stripline circulator including a ferrite resonator which is consisted of a circular disk and two annuli disks is designed and fabricated. Using RGF(Recursive Green Function) technique, electromagnetic field of port and input impedance is presented. The circulator characteristics are compared according to the ferrite arrangement, bias field intensity and port width. The pass-band frequency of the fabricated circulator using the designed data is from 1.55 GHz to 2.95 GHz, the reflection coefficient $S_{11}$ of input port is -30 dB, and the transmission coefficient $S_{21}$ between input port and isolation port is -28 dB at resonating point 2.38 GHz.

• Korean Journal of Optics and Photonics
• /
• v.22 no.1
• /
• pp.40-45
• /
• 2011

Design and fabrication of a TCRR (Triple-coupler Ring Resonator) filter which can provide a doubled FSR (Free Spectral Range) compared with a conventional DCRR (Double-coupler Ring Resonator) filter, are discussed. Through the use of a polymer material with a good thermo-optic property and with high contrast between core and cladding polymer, a compact TCRR filter composed of straight and curved buried waveguides of small radius is designed and fabricated. The transmission characteristics from the through and drop ports are measured using a tunable laser and a fiber array block, and the FSR is observed to be 4.4 nm, about twice that of DCRR filter, and almost the same as that obtained from the analysis using a transfer matrix method.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.11 no.9
• /
• pp.793-800
• /
• 2001

This paper deals with a new design methodology for a switching-type fuzzy-model-based controller in continuous and discrete-time system. Takagi-Sugeno (TS) fuzzy model is employed to design the switching-type fuzzy-model-based controller. A switching-type fuzzy-model-based controller is constructed based on the spirit of “divide and conquer”. The global system which has several rules in divided into several subsystems and then, a solution is found at each subsystem. The global solution is determined by a conjunction of the solutions of each subsystem. The design conditions are formulated in terns of linear matrix inequalities (LMIs), which guarantee the stabilization of a given TS fuzzy system. Simulation examples are included for ensuring the proposed control method.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.19 no.2
• /
• pp.180-184
• /
• 2009

The memory is very sensitive to the soft error because the integration of the memory increases under low power environment. Error correcting codes (ECCs) are commonly used to protect against the soft errors. This paper proposes a new genetic ECC design method which reduces power consumption. Power is minimized using the degrees of freedom in selecting the parity check matrix of the ECCs. Therefore, the genetic algorithm which has the novel genetic operators tailored for this formulation is employed to solve the non-linear power optimization problem. Experiments are performed with Hamming code and Hsiao code to illustrate the performance of the proposed method.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.13 no.3
• /
• pp.293-299
• /
• 2003

This paper discusses a design of intelligent controller with time delay for Internet-based remote control. The finite Markovian process is adopted to model the input delay of the overall control system. It is assumed that the zero and hold devices are used for control input. The Takagi-Sugeno (T-S) fuzzy system with uncertain input delay is utilized to represent nonlinear plant. The continuous-time T-S fuzzy system with the Markovian input delay is discretized for easy handling delay, accordingly, the discretized T-S fuzzy system is represented by a discrete-time T-S fuzzy system with jumping parameters. The robust stochastic stabilizibility of the jump T-S fuzzy system is derived and formulated in terms of linear matrix inequalities (LMIs). An experimental results is provided to visualize the feasibility of the proposed method.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.40 no.2
• /
• pp.10-18
• /
• 2003

This paper presents a method for designing guaranteed cost fuzzy filter with a desired H$_{\infty}$ disturbance rejection constraint of delayed fuzzy dynamic systems. This method not only guarantees an induced L$_2$ norm bound constraint on disturbance attenuation, but also minimizes an upper bound on a linear quadratic performance measure. A sufficient condition for the existence of guaranteed cost fuzzy filter with H$_{\infty}$ constraint is then presented in terms of linear matrix inequalities(LMIs). A simulation example is given to illustrate the design procedures and performances of the proposed methods.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.7
• /
• pp.1-8
• /
• 2008

Low Density Parity Check codes(LDPC) are recently focused on communication systems due to its good performance. The standard of WiBro has also included LDPC codes as a channel coding. The weak point of implementation for LDPC encoder is that conventional binary Matrix Vector Multiplier has many clock cycles which limit throughput. In this paper, we propose semi-parallel architecture by using cyclic shift registers and exclusive-OR without conventional Matrix Vector Multipliers over the standard parity check matrices with Circulant Permutation Matrices(CPM). Furthermore, multi-rate encoder is designed by using proposed architecture. Our encoder with multi-rate for IEEE 802.16e LDPC has lower clock cycles and higher throughput.