• Title/Summary/Keyword: 설계시험평가

Search Result 1,945, Processing Time 0.046 seconds

Estimation of Characteristics and Methane Production Rate of Food Waste (음식물류 폐기물 특성 및 메탄 발생가능량 평가)

  • Lee, Min-Kyu;Kim, Kyung;Shin, Hyun-Gon;Bae, Ki-Hwan;Kim, Choong-Gon;Park, Joon-Seok
    • Clean Technology
    • /
    • v.25 no.3
    • /
    • pp.223-230
    • /
    • 2019
  • This research was performed to evaluate the characteristics of food waste from 5 areas in Gangwon Province, Korea and to predict the $CH_4$ gas production rate. Food wastes were sampled in July and September, 2017. The amount of methane gas generation was evaluated through the biochemical methane potential (BMP) test and a calculation method using chemical composition. Average bulk density and pH of the food wastes were in the range of $0.758{\sim}0.850g\;cm^{-3}$ and 4.29 ~ 4.75, respectively. By physical composition, vegetables were the highest with 56.43 ~ 72.81% with fruits recording 5.31 ~ 8.95%, cereals 1.60 ~ 18.73%, fish and meat 4.47 ~ 12.11%, and filtrate 1.76 ~ 3.64%. The average water content was 69.30 ~ 75.87%, and VS and ash content were 22.50 ~ 27.98% and 1.63 ~ 2.48%, respectively. In addition, $BOD_5$, $COD_{Cr}$, and $COD_{Mn}$ were in the ranges of $17,690.3{\sim}33,154.9mg\;L^{-1}$, $106,212.3{\sim}128,695.5mg\;L^{-1}$, and $51,266.1{\sim}63,426.3mg\;L^{-1}$, respectively. The NaCl content ranged from 0.81 to 1.17%. The results of elemental analysis showed that the contents of C, H, O, N, and S were 44.87 ~ 48.1%, 7.12 ~ 7.57%, 40.13 ~ 43.78%, 3.22 ~ 4.14%, and 0.00 ~ 0.02%, respectively. In a comparison of the methane production yield per VS mass of food waste, there was no significant difference between the cumulative amount (${0.303{\sim}0.354m_{CH4}}^3\;{kg_{VS}}^{-1}$) by the BMP test and the theoretical amount (${0.294{\sim}0.352m_{CH4}}^3\;{kg_{VS}}^{-1}$) calculated by chemical composition.

Comparison of Ileal and Fecal Digestibility of Canola Meal and Wheat Bran in Ducks (채종박과 밀기울에 대한 오리의 분과 회장 소화율 비교)

  • Kim, Ji-Hyuk;Kang, Hwan-Gu;Bang, Han-Tae;Hwangbo, Jong;Choi, Hee-Cheol;Kim, Dong-Wook;Hong, Eui-Chul
    • Korean Journal of Poultry Science
    • /
    • v.42 no.1
    • /
    • pp.69-75
    • /
    • 2015
  • This work was carried out to evaluate the feces and ileal digestibility of canola meal and wheat bran in ducks. Ninety Pekin ducks (6-week-old, average 3.4 kg) were divided into three treatments (6 replications/treatment, 5 birds/replication) by feedstuffs (basal diet, canola meal, and wheat bran) and were fed on these diets in individual metabolic cages for one week. After one week, the samples for analysis were collected from feces and ileum. On comparison of treatments and collected sites, the feces digestibility of basal diet was the highest among treatments on chemical compositions except crude protein and crude fat and ileal digestibility of canola meal was the lowest (P<0.01). On comparison of treatments, the digestibility of basal diet was higher and that of wheat bran was lower when compared to other treatments (P<0.05). The feces digestibility was lower than the ileal digestibility in crude protein (P<0.05) and crude fat (P<0.01). The digestibility of amino acid was the highest at feces of control group among treatments (P<0.01). No significant difference was detected in terms of digestibility of isoleucine, leucine and phenylalanine among essential amino acids, and alanine, glycine and tyrosine among non-essential amino acids between control and wheat bran, and wheat bran and canola meal. However amino acid digestibility was higher in control group when compared to canola meal group (P<0.05). Other amino acid digestibilities were not significantly differ by treatments. These results may provide the basic data on amino acid digestibility of ducks to evaluate feedstuffs and to formulate optimum diet for commercial Pekin duck.

The Compositions and the Characteristics of the Chinese National Test for University Admissions, and the Analysis on Items Concerning Chemistry (중국 대학입학시험의 구성 및 특징과 화학 문항 분석)

  • Kim, Hyun-Kyung
    • Journal of The Korean Association For Science Education
    • /
    • v.31 no.8
    • /
    • pp.1158-1174
    • /
    • 2011
  • In this study, we examined the compositions, basic principles, and the area of the National Higher Education Entrance Examination (GaoKao) in 2009, we also analyzed the categories and characteristics of items. Also, the GaoKao was analyzed in terms of test specifications, the number of items, item patterns, difficulty levels, and implications of the College Scholastic Ability Test(CSAT) were explored. Results show Natural Science section of the National Test 1, 2 are 300 points per 150 min, and Natural Science, and Chemistry of Shanghai is 150 points each per 120 min. Also, the GaoKao contained multiple choice and fill in the blanks questions, and the description items are composed of experiments of various types. The GaoKao Natural Science section is composed of physics, chemistry, biology but not earth science, which is different from the CSAT. GaoKao requires basic understanding or the observation ability to reasoning, the complex thinking ability, especially emphasized on the experiment ability. The range of possible questions is in the examination outline, not the curriculum, and the ratio of questions from the University level is high. In the analysis of the behavioral domain, the ratios of the understanding and application items is higher than the CSAT, and inquiry items is lower, but the inquiry items are deeper. In case of the ratio of the expected correct answer, National Test 1 and National Test 2 is similar, but the difficult items or about 20~39% of the test is 4~5 times to that of the CSAT, making the GaoKao very difficult. The peculiar characteristics of GaoKao is the emphasis on the experiment, and even though the practical items is of lower ratio, they are very useful in life.

Effects of Dietary Pine Cone Meal on Growth Performance, Blood Characteristics, Carcass Quality and Fecal Noxious Gases Compounds in Finishing Pigs (잣 부산물의 급여가 비육돈의 생산성, 혈액성상, 도체특성 및 분내 유해가스 발생에 미치는 영향)

  • Lee, J.H.;Park, K.W.;Shin, S.O.;Cho, J.H.;Chen, Y.J.;Kim, I.H.
    • Journal of Animal Science and Technology
    • /
    • v.49 no.6
    • /
    • pp.761-772
    • /
    • 2007
  • This study was conducted to evaluate effects of dietary pine cone meal on growth performance, blood characteristics, carcass quality and fecal noxious gases compounds in finishing pigs. The total of sixty [(Landrace×Yorkshire)×Duroc] pigs(86.01±0.25kg in average initial body weight) were used in 35 days assay. Dietary treatments included 1) T1(2% cottonwood sawdust), 2) T2(1% cottonwood sawdust+1% pine cone meal) and 3) T3(2% pine cone meal). There were three dietary treatments with five replicate pens per treatment and four pigs per pen. During the overall periods, there were no significant differences in ADG(Average daily gain), ADFI(Average daily feed intake) and gain/feed ratio among treatments (P>0.05). Also, Nutrient digestibilities and blood characteristics were not affected by dietary treatments. At the end of this experiment, a*-value of logissimus dorsi muscle color and sensory evaluation color were higher in T3 treatment than T1 treatment(P<0.05). In fatty acid contents of lean, C18:1 and total MUFA were significantly lower in T1 treatment than other treatments(P<0.05). However, total ω6 and total PUFA were higher in T1 treatment than T2 treatment(P<0.05). In fatty acid contents of fats, total SFA was significantly higher in T2 treatment than T3 treatment(P<0.05). C18:1 was higher in T2 treatment than T1 treatment(P<0.05). There were no significant differences in fecal noxious gas compounds among the treatments. In conclusion, the results of the experiment was affected by dietary supplementation of pine cone meal on meat color and fatty acid composition of pork in finishing pigs.

A Study on Estimating Shear Strength of Continuum Rock Slope (연속체 암반비탈면의 강도정수 산정 연구)

  • Kim, Hyung-Min;Lee, Su-gon;Lee, Byok-Kyu;Woo, Jae-Gyung;Hur, Ik;Lee, Jun-Ki
    • Journal of the Korean Geotechnical Society
    • /
    • v.35 no.5
    • /
    • pp.5-19
    • /
    • 2019
  • Considering the natural phenomenon in which steep slopes ($65^{\circ}{\sim}85^{\circ}$) consisting of rock mass remain stable for decades, slopes steeper than 1:0.5 (the standard of slope angle for blast rock) may be applied in geotechnical conditions which are similar to those above at the design and initial construction stages. In the process of analysing the stability of a good to fair continuum rock slope that can be designed as a steep slope, a general method of estimating rock mass strength properties from design practice perspective was required. Practical and genealized engineering methods of determining the properties of a rock mass are important for a good continuum rock slope that can be designed as a steep slope. The Genealized Hoek-Brown (H-B) failure criterion and GSI (Geological Strength Index), which were revised and supplemented by Hoek et al. (2002), were assessed as rock mass characterization systems fully taking into account the effects of discontinuities, and were widely utilized as a method for calculating equivalent Mohr-Coulomb shear strength (balancing the areas) according to stress changes. The concept of calculating equivalent M-C shear strength according to the change of confining stress range was proposed, and on a slope, the equivalent shear strength changes sensitively with changes in the maximum confining stress (${{\sigma}^{\prime}}_{3max}$ or normal stress), making it difficult to use it in practical design. In this study, the method of estimating the strength properties (an iso-angle division method) that can be applied universally within the maximum confining stress range for a good to fair continuum rock mass slope is proposed by applying the H-B failure criterion. In order to assess the validity and applicability of the proposed method of estimating the shear strength (A), the rock slope, which is a study object, was selected as the type of rock (igneous, metamorphic, sedimentary) on the steep slope near the existing working design site. It is compared and analyzed with the equivalent M-C shear strength (balancing the areas) proposed by Hoek. The equivalent M-C shear strength of the balancing the areas method and iso-angle division method was estimated using the RocLab program (geotechnical properties calculation software based on the H-B failure criterion (2002)) by using the basic data of the laboratory rock triaxial compression test at the existing working design site and the face mapping of discontinuities on the rock slope of study area. The calculated equivalent M-C shear strength of the balancing the areas method was interlinked to show very large or small cohesion and internal friction angles (generally, greater than $45^{\circ}$). The equivalent M-C shear strength of the iso-angle division is in-between the equivalent M-C shear properties of the balancing the areas, and the internal friction angles show a range of $30^{\circ}$ to $42^{\circ}$. We compared and analyzed the shear strength (A) of the iso-angle division method at the study area with the shear strength (B) of the existing working design site with similar or the same grade RMR each other. The application of the proposed iso-angle division method was indirectly evaluated through the results of the stability analysis (limit equilibrium analysis and finite element analysis) applied with these the strength properties. The difference between A and B of the shear strength is about 10%. LEM results (in wet condition) showed that Fs (A) = 14.08~58.22 (average 32.9) and Fs (B) = 18.39~60.04 (average 32.2), which were similar in accordance with the same rock types. As a result of FEM, displacement (A) = 0.13~0.65 mm (average 0.27 mm) and displacement (B) = 0.14~1.07 mm (average 0.37 mm). Using the GSI and Hoek-Brown failure criterion, the significant result could be identified in the application evaluation. Therefore, the strength properties of rock mass estimated by the iso-angle division method could be applied with practical shear strength.

A Case Study of Software Architecture Design by Applying the Quality Attribute-Driven Design Method (품질속성 기반 설계방법을 적용한 소프트웨어 아키텍처 설계 사례연구)

  • Suh, Yong-Suk;Hong, Seok-Boong;Kim, Hyeon-Soo
    • The KIPS Transactions:PartD
    • /
    • v.14D no.1 s.111
    • /
    • pp.121-130
    • /
    • 2007
  • in a software development, the design or architecture prior to implementing the software is essential for the success. This paper presents a case that we successfully designed a software architecture of radiation monitoring system (RMS) for HANARO research reactor currently operating in KAERI by applying the quality attribute-driven design method which is modified from the attribute-driven design (ADD) introduced by Bass[1]. The quality attribute-driven design method consists of following procedures: eliciting functionality and quality requirements of system as architecture drivers, selecting tactics to satisfy the drivers, determining architectures based on the tactics, and implementing and validating the architectures. The availability, maintainability, and interchangeability were elicited as duality requirements, hot-standby dual servers and weak-coupled modulization were selected as tactics, and client-server structure and object-oriented data processing structure were determined at architectures for the RMS. The architecture was implemented using Adroit which is a commercial off-the-shelf software tool and was validated based on performing the function-oriented testing. We found that the design method in this paper is an efficient method for a project which has constraints such as low budget and short period of development time. The architecture will be reused for the development of other RMS in KAERI. Further works are necessary to quantitatively evaluate the architecture.

Comparison of Crack Growth Test Results at Elevated Temperature and Design Code Material Properties for Grade 91 Steel (Grade 91 강의 고온 균열진전 실험 결과와 설계 물성치의 비교)

  • Lee, Hyeong-Yeon;Kim, Woo-Gon;Kim, Nak-Hyun
    • Transactions of the Korean Society of Mechanical Engineers A
    • /
    • v.39 no.1
    • /
    • pp.27-35
    • /
    • 2015
  • The material properties of crack growth models at an elevated temperature were derived from the results of numerous crack growth tests for Mod.9Cr-1Mo (ASME Grade 91) steel specimens under fatigue loading and creep loading at an elevated temperature. These crack growth models were needed for defect assessment under creep-fatigue loading. The mathematical crack growth rate models for fatigue crack growth (FCG) and creep crack growth (CCG) were determined based on the test results, and the models were compared with those of the French design code RCC-MRx to investigate the conservatism of the code. The French design code RCC-MRx provides an FCG model and a CCG model for Grade 91 steel in Section III Tome 6. It was shown that the FCG model of RCC-MRx is conservative, while the CCG model is non-conservative compared with the present test data. Thus, it was shown that further validation of the property was required. Mechanical strength tests and creep tests were also conducted, and the test results were compared with those of RCC-MRx.

Design and Evaluation of Small-scale Supercritical Carbon Dioxide System with Solar Heat Source (태양열 적용을 위한 소형 초임계 이산화탄소 실험설비 설계 및 평가)

  • Choi, Hundong;So, Wonho;Lee, Jeongmin;Cho, Kyungchan;Lee, Kwon-yeong
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.21 no.6
    • /
    • pp.403-410
    • /
    • 2020
  • This paper focuses on the design of a 12-kW small-scale supercritical CO2 test loop. A theoretical study, stabilization, and optimization of carbon dioxide were carried out with the application of a solar heat source based on solar thermal data in Pohang. The thermodynamic cycle of the test facility is a Rankine cycle (transcritical cycle), which contains liquid, gas, and supercritical CO2. The system is designed to achieve 6.98% efficiency at a maximum pressure of 12 MPa and a maximum temperature of 70℃. In addition, the optimum turbine inlet temperature and pressure were calculated to increase the cycle efficiency, and the application of an internal heat exchanger (IHX) was simulated. It was found that the maximum efficiency increases to 18.75%. The simulation confirmed that the efficiency of the cycle is 6.7% in May and 6.26% in June.

Analysis on the Analytical Behavior of Soft Ground Reinforced with Granular Compaction Piles (GCP로 보강된 연약지반의 해석적 거동분석)

  • Kim, Min-Seok;Na, Seung-Ju;Yang, Yeol-Ho;Kim, Daehyeon
    • Journal of the Korean Geosynthetics Society
    • /
    • v.15 no.3
    • /
    • pp.27-37
    • /
    • 2016
  • Although many studies on the Granular Compaction Pile (GCP) have been done by many researchers, the GCP design has not been systematically done due to the absence of the rational design methodology. As the GCP design has been mostly done by engineers' own experiences, some failure cases have been reported to occur. For this reason, it is very difficult to confirm definite causes of the failure and establish the prevention plans for the failure. Therefore, this study aims to investigate the optimal mixing ratio of gravel and sand, the effects of the internal friction angle of the GCP on the stress concentration ratio and the vertical and horizontal settlements. In order to analyze the behavior of the soft ground reinforced with the GCP depending on the different design parameters such as the stress concentration ratio and the internal friction angle, a number of finite element (FE) analyses were performed. From the direct shear test, the optimal mixing ratio of gravel to sand was found to be 70:30. Based on the numerical analyses, as the internal friction angle increased, the stress concentration ratio increased and it converged to a constant value. In addition, the larger the internal friction angle, the smaller the settlements. Consequently, the use of the optimal mixing ratio of gravel and sand can lead to reducing both the lateral flow and the heaving phenomenon.

Design of Adaptive Neuro-Fuzzy Inference System Based Automatic Control System for Integrated Environment Management of Ubiquitous Plant Factory (유비쿼터스 식물공장의 통합환경관리를 위한 적응형 뉴로-퍼지 추론시 스템 기반의 자동제어시스템 설계)

  • Seo, Kwang-Kyu;Kim, Young-Shik;Park, Jong-Sup
    • Journal of Bio-Environment Control
    • /
    • v.20 no.3
    • /
    • pp.169-175
    • /
    • 2011
  • The adaptive neuro-fuzzy inference system (ANFIS) based automatic control system framework was proposed for integrated environment management of ubiquitous plant factory which can collect information of crop cultivation environment and monitor it in real-time by using various environment sensors. Installed wireless sensor nodes, based on the sensor network, collect the growing condition's information such as temperature, humidity, $CO_2$, and the control system is to monitor the control devices by using ANFIS. The proposed automatic control system provides that users can control all equipments installed on the plant factory directly or remotely and the equipments can be controlled automatically when the measured values such as temperature, humidity, $CO_2$, and illuminance deviated from the decent criteria. In addition, the better quality of the agricultural products can be gained through the proposed automatic control system for plant factory.