• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.10 no.6
• /
• pp.62-72
• /
• 1996

In this paper, ozonizer using U-type lamp(Olamp) has been designed and manufactured, which can perform a role of lighting source and ozonizer by using photo and chemical methods. The discharge, spectrum, illuminance, ozone concentration, ozone generation, ozone yield and sterilization characteristics of Olamp have been studied. The important conclusions obtained from this paper can be summa'||'&'||'not;rized as follows. As a result of spectrum characteristics for Olamp, ultraviolet ray of a short wave'||'&'||'not;lengths and a visible ray are radiated. The illuminance of Olamp was found to be useful for "color distinctive and intermittent works in the dark working spaces" in accordance with KS A 3011. The ozone concentration of gaseous phase is inversely proportional to quality of supplied gas. Also, ozone conce tration and generation of gaseous phase are rised more commercial oxygen gas than those trial air gas for constant quality of supplied gas. Ozone generation and ozone yield of gaseous phase are proportion'||'&'||'not;al to ozone concentration of gaseous phase. The characteristics of liquid ozone concentration at distilled water are proportional to circulating velocity of fermentation chamber and ozone concentration of gas'||'&'||'not;eous phase. As a result, the sterilization characteristics of Escherichia coli have been obtained more than 97[ % J.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.14 no.6
• /
• pp.575-593
• /
• 2012

This paper briefly introduces the scope and objectives of SKB Task 8, which is an international cooperative research project. In addition, the hydraulic behaviors of bentonite buffer focusing on the interactions between bentonite and a rock mass with a joint were investigated using TOUGH2 code as part of a sub-mission of Task 8a. The effects of a rock joint and high capillary pressure of bentonite on the re-saturation properties and pressure distribution in a buffer were identified and successfully incorporated in the TOUGH2 code. Based on the numerical results, it was found that the speed of re-saturation in bentonite surrounded by a rock mass with a joint is 2.5 to 12 times faster than that in a condition without a rock joint, while the degree of saturation in the lower part of the buffer material is generally higher than in the upper part in both the cases of with and without a joint. It can be anticipated that the results obtained from this study can be applied to an estimation of the full saturation time and a determination of optimum thickness with regard to the design of the bentonite buffer in a high level waste disposal system.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2017.04a
• /
• pp.59-59
• /
• 2017

무인 헬리콥터의 양력을 개선하기 위한 익형 설계 단계로서 두꺼운 익형(V1505A)과 얇고 처진 익형(V2008B)의 기본 두 익형의 특성을 예측하는데 있어 회전하는 블레이드의 현실적 조건을 반영한 3D 모델을 마련하고 성능을 예측하였다. Fluent를 이용한 400 mm 선형모델의 시뮬레이션에서는 V1505A 익형은 높은 받음각에서 안정적인 특성을 보인 반면 V2008B는 비교적 높은 동력효율 특성을 보였으나, 높은 받음각에서는 실속 이후 양력이 급락하는 특성을 나타낸다. 형성된 노드 수는 약 870,000개로 하였다. 시위길이 135 mm인 익형 V2008B의 형상은 ANSYS (Fluent v16.2)를 이용해 반경(길이) 1,502 (1,380) mm 의 로터 블레이드를 구성하였다. 충분하지 않은 유동장이 익형 표면에서의 유동의 영향에 영향을 주지 않도록 직경 20 m의 원방경계(far field)를 형성하였다. 사용된 매쉬의 형태는 정사면체 형태로 로터 표면으로부터의 첫 번째 두께 높이는 0.001 m이고 10개의 층으로 형성하였다. 정지 비행하는 헬리콥터의 상태를 가정하여 회전좌표계를 이용하여 정상상태의 유동을 해석하고 사용된 난류모델은 넓은 영역에서의 유동을 고려하여 Realizable $k-{\varepsilon}$ 모델을 사용하였다. 내측그립 받음각 $6{\sim}22^{\circ}$에 대하여 현실적인 회전속도를 연동하여 600~1000 rpm을 적용하였다. 반복수(iteration)는 2000으로 하여 잔차값(residual)이 충분히 수렴하도록 하였다. 전체적으로 실제 헬리콥터가 발휘하는 양력보다는 낮은 수치로 예측되었으며 모델 및 해석 조건에 대한 검토가 필요해 보인다. 양력 값은 받음각 $10^{\circ}$에서 자중(약 68 kgf)을 극복하였고 받음각 $12^{\circ}$에 유상하중 20 kgf을 발휘하며 888 N의 양력을 보였다, 이어 받음각 $22^{\circ}$에서 실속 현상이 발생하였다. 받음각이 증가함에 따라 항력 역시 증가하였으며 받음각 $12^{\circ}$에서 121 N이었고 실속에 이르며 항력은 갑자기 증가할 것으로 예측된다. 본 연구는 변이 익형 개발의 선행 단계로 기본 익형에 대한 공력특성을 CFD 시뮬레이션을 통하여 예측하였다. 예측 값은 현실적 실험방법을 통하여 검증이 되어야 하며 이후 변이익형에 대한 예측과 설계가 가능하다.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.36C no.11
• /
• pp.64-74
• /
• 1999

A new clock skew optimization for clock routing using link-edge insertion is proposed in this paper. It satisfies the given skew bound and prevent the total wire length from increasing. As the clock skew is the major constraint for high speed synchronous ICs, it must be minimized in order to obtain high performance. But clock skew minimization can increase total wire length, therefore clock routing is performed within the given skew bound which can not induce the malfunction. Clock routing under the specified skew bound can decrease total wire length Not only total wire length and delay time minimization algorithm using merging point relocation method but also clock skew reduction algorithm using link-edge insertion technique between two nodes whose delay difference is large is proposed. The proposed algorithm construct a new clock routing topology which is generalized graph model while previous methods uses only tree-structured routing topology. A new cost function is designed in order to select two nodes which constitute link-edge. Using this cost function, delay difference or clock skew is reduced by connecting two nodes whose delay difference is large and distance difference is short. Furthermore, routing topology construction and wire sizing algorithm is developed to reduce clock delay. The proposed algorithm is implemented in C programming language. From the experimental results, we can get the delay reduction under the given skew bound.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.2A
• /
• pp.65-73
• /
• 2012

In this study, we tested structural performance of Half-Decked PSC girder which was developed for applying to long span bridge. We operated 4 point bending test with 60 m span full scale girder designed as simple bridge with hinge-roller boundary condition. Actuators were set on the both sides of girder, 5.5 m away from the center, and 4 stages of cyclic loading was applied at rate of 1 kN/sec. Through stages 1 to 4, loading and unloading 1,000 kN, 1,200 kN, 1,500 kN, and 2,000 kN were repeated and displacement, strain of concrete and steel, crack of girder were checked. From these results, the strength of girder was assessed and resilience and ductility were observed after removing the load. Since initial flexural crack occurred in the vicinity of 1,400 kN, non-linearity of load-displacement curve appeared and definite residual strain was measured at that point. The test result showed that initial cracking load was over twice the DB-24 load which means the developed girder had sufficient strength. To verify the experimental results, we numerically analyze the test and confirmed that the data were similar with results from the test above. Half-Decked PSC type of 60 m-girder developed in this study showed its adequate structural capacity through static loading test, which proved that possibility of applying the girder to actual bridges practically.

• Journal of Korean Society for Geospatial Information Science
• /
• v.23 no.1
• /
• pp.73-79
• /
• 2015

Recently, BIM proliferates at high speeds so that BIM planning is trying to be used in various kinds of engineering. However, when using different software during design phase and construction phase, the problem of mutual compatibility is coming out. Even the BIM technology has been used or the practical applicability has been made into result, it would be fair to say that BIM has limitations in the visual level. In this research, it is meaningless to obtain the BIM result as the primary purpose. As the usefulness of it is judged incomplete, we committed to master the trend and problems of terrain spatial information systems and BIM. Furthermore, the plan of building the BIM in the civil field, especially the civil-BIM based on the technology ofterrain spatial information has been presented. It can be judged through this research that the high-capacity DB of BIM occurred during the whole process may cause poor performance of the following stage the structure system which connects the terrain spatial information and civil-BIM. In order to manage the optimal full cycle, the spatial analysis technology of the stages after choosing the DB has been described.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.43 no.2
• /
• pp.30-39
• /
• 2015

The English Landscape garden and picturesque aesthetics, which was in fashion during the 18th to early 19th century in England, has been accused of making people see the actual garden in terms of a static landscape painting without a synesthetic engagement in nature. As new optic devices such as diorama, panorama, photography, and cinematography were invented, ways of seeing nature transitioned from a perspective vision to a panoramic, that is, modern one. This study intends to uncover signs of this kind of modern vision in the picturesque aesthetics and visual representation of landscape gardener Humphry Repton. German garden theorist Christian Cay Lorenz Hirschfeld contended that the English landscape garden was a new style of designing landscape that followed the principle of the serpentine line, which produced movement in sightlines; thus, he considered garden art as a superior art form among all other genres. The signs of visual motion appear in Repton's sketches of "Red Books". Firstly, he designed systemic routes in his clients' properties by considering different types of movements between walks and drives. Secondly, he often used the visual effects of panoramic views for his sketches in order to allow his clients to experience the human visual field. Lastly, he constructed sequences of sketches in order to provide his clients with an illusion of movement; in other words, Repton's sketches functioned as potential visual media to produce the duration of time in a visual experience. Thus, the garden aesthetics of the time reflected the contemporary visual culture, that is to say, a panoramic vision pertaining to visual motion.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.28 no.2
• /
• pp.61-68
• /
• 2024

The majority of high-speed railway bridges along the domestic Gyeongbu and Honam lines feature a PSC-box type structure with a span length ranging from 35 to 40m, which typically exhibits a first bending natural frequency of approximately 4 to 5Hz. When KTX high-speed trains transverse these bridges at speeds ranging from 290 to 310km/h, the vibration induced by the trains approaches the first bending natural frequency of the bridge. Furthermore, with the upcoming operation of a EMU-320 high-speed train and the anticipated increase in the speeds of these high-speed trains, there is a need to analyze the dynamic response of high-speed railway bridges. For this, based on measured responses from actual railway bridges, a numerical model was constructed using a numerical model updating technique. The dynamic response of the updated numerical model exhibited a strong agreement with the measured response from the actual railway bridges. Subsequently, this updated model was utilized to analyze the dynamic response characteristics of the bridges when KTX and EMU-320 trains operate at increased speeds. The maximum vertical displacement and acceleration at the mid-span of the bridges were also compared to those specified in the railway design standard with the increasing speed of KTX and EMU-320.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.85-85
• /
• 2015

현재 태양광에너지 시장은 해마다 빠른 속도로 성장하는 추세이며 50 GWp/년 이상의 시장으로 변화하였고 앞으로도 전체적인 성장세는 지속 유지될 것으로 판단된다. 하지만 이와 아울러 각 Value chain 별로 많은 기업들이 생겨나게되어 각각의 기업들이 제품을 고효율 저가화 함으로서 경쟁력을 확보하기 위해 많은 노력들이 기울이고 있으며 본 강연에서는 이러한 측면에서 태양광 에너지의 분야별 고효율/저가화를 위한 기술동향을 살펴보고자 한다. 태양광 산업은 아직은 다소 높은 발전단가로 인해 일부 정부의 지원이나 정책에 의해 산업의 규모가 결정되게 되는데 주요한 지원제도는 RPS 제도와 FIT 제도가 있으며 우리나라는 초기 FIT 제도로 국가에서 태양광에서 생산된 전기를 높은 가격에 사주었으나 근래에들어 RPS 제도를 운영하게 되었으며 매전을 하면서 SMP에 준하는 수익을 창출하고 이와 아울러 REC 를 확보하여 확보된 REC 단가에 의해 추가적인 수익을 창출하는 구조의 발전사업이 진행되고 있다. 그리고 RPS나 FIT와 같은 정부의 지원없이도 발전단가의 경쟁력을 확보하는 시점을 그리드패러티라고 하며 이는 매우 중요한 의미를 갖는다. 태양광의 저가화는 그리드패러티 달성을 확보하기 위해 필수적으로 필요한 사안이며 앞으로도 이러한 저가화 / 고효율화 기술노력은 계속 진행될 것으로 판단된다. 우선 소재의 가격을 줄이기 위해 웨이퍼의 두께가 점점 박형화 되어가고 박형화 되면서도 안정적인 공정수율 및 효율을 향상시키기 위한 기술개발이 진행되고 있으며 Cell 분야에 있어서도 고효율을 위한 다양한 Texturing 기술 및 패시베이션 기술의 개발이 이루어 지고 있으며 고효율 컨셉의 MRT cell, Back contact cell 등 고효율 구조의 cell의 양산을 진행하고 있는 등 최근 n-type 기반의 고효율 cell 기술이 활발하게 양산화 검토가 이루어 지고 있다. 모듈 분야에 있어서는 저가/고효율화와 아울러 제품의 신뢰성 확보가 무엇보다도 중요하게 다루어 지고 있으며 이는 모듈이 최소 25년 이상 Field 에서 운용되어 수익창출이 가능해야 하므로 가장 중요한 요소중에 하나라고 할 수 있다. 신뢰성 측면에서 중요하게 다루어 지고 있는 것 중 하나가 PID 저감을 위한 노력이며 이와 관련된 각 소재의 개발이 가장 활발하게 진행되고 있으며 이와 아울러 장수명을 보장하기 위한 내구성이 겸비된 봉지재의 개발 또한 많은 관심을 불러 일으키고 있다. 저가/고효율화를 위해 CTM loss를 줄이기 위한 다양한 시도가 이루어지고 있으며 특수 형태의 리본으로 빛의 흡수를 증가시키거나 컨택저항을 최소화 하기위한 소재의 개발이 이루어 지고 있다. 태양광 시스템 분야의 경우 발전량과 수익창출에 있어 직접적인 영향을 미치는 분야로서 전체 시스템의 loss 를 줄이고 최적의 환경에서 최대한의 발전량을 확보하기 위한 array 설계 및 운용기술이 활발하게 개발되고 있으며 시스템에서의 loss를 줄여줄수 있는 마이크로 인버터나 multi string 인버터의 적용도 이루어 지고 있으나 저가화를 위한 추가적인 노력이 필요한 상황이다. 본 강연의 마지막으로 이러한 노력들의 산물인 특수 태양광 제품 및 시스템의 기술동향에 대해 살펴하고자 한다. 사막은 전체면적의 1/3을 차지할 정도로 넓은 면적을 자랑하지만 밤과 낮의 기온차 그리고 계통 선로의 부재 등 적용하기 어려운 환경적인 제약도 함께 존재하며 이러한 문제를 해결하기 위한 방안에 대해 살펴보고 최근 Hot issue 중의 하나인 수상 태양광 시스템의 장, 단점과 기술적 특성 등을 살펴보고자 한다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.46 no.1
• /
• pp.68-77
• /
• 2018

In order to analyze the overall characteristics of the lunar orbiter, the Variable Coast method, which can be launched everyday, is applied to the 3.5 phasing loop transfer trajectory. The mission scenario for the entire process from launching to entering the lunar orbit is set up and performed simulation by selecting the launch pad and launch vehicle. In particular, the SEM(Satellite-Earth-Moon) angle defined in Earth-Moon rotating frame is an important constraint to comprehensively evaluate the 3.5 phasing loop transfer trajectory. The simulation using SEM angle is analyzed from various viewpoints such as launch epoch, coast duration, perigee altitude and ${\Delta}V$ not only trans-lunar trajectory but lunar orbit insertions and the optimum SEM angle is suggested in this study. It is expected that this results will be helpful to evaluate the characteristics of the 3.5 phasing loop transfer trajectory according to the launch vehicle selection by comparison with Fixed Coast analysis results in the future.