• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.50 no.4
• /
• pp.233-240
• /
• 2022

The smart weapon system is a new weapon system of the future battlefield environment as a miniature guided weapon that performs precision strike missions through terminal phase guidance. However, it has small coverage to guide due to its low maneuverability because the smart weapon is controlled by using actuator of piezoelectric drive type due to the structural limitations. In this paper, we propose a firing data calculation algorithm under non-standard conditions to increase the effectiveness of the smart weapon. The proposed algorithm calculates firing data under non-standard conditions by calibrating firing data under standard conditions using information acquired in battlefield environments. The performance of the proposed algorithm is verified by numerical simulations under various conditions.

• Journal of Digital Convergence
• /
• v.18 no.10
• /
• pp.219-224
• /
• 2020

The purpose of this study is to develop a device to replace the pre-boring method, which is generally constructed, to prevent pile damage caused by tension cracks that reason from tension waves generated during PHC pile construction on soft ground. Tension cracks are caused by tension waves from the hammer striking during the PHC pile hitting on the soft ground, which in turn leads to faulty construction. In order to prevent the occurrence of tension waves generated during driving, apply separate driving force increasing device to prevent the generation of tension waves, and pile damage as well. Also, it is an eco-friendly construction method that reduces smoke and noise by improving construction speed, reducing construction costs, and able to small equipment when developing equipment. This development equipment is a piece of effective equipment that can pioneer the Saemangeum reclamation area, the South-east Asian construction market, where the Deep soft ground is distributed.

• Journal of the Korea Society for Simulation
• /
• v.24 no.4
• /
• pp.35-41
• /
• 2015

Recoil system for 40mm automatic gun is a device developed to absorb the shock of explosion. It is impossible to conduct pinpoint strike due to recoil if very high explosive shock, which is generated when an automatic gun fires shells, can't be absorbed. This study covers development and verification of analysis model for recoil system by utilizing a multi-domain software. The research process is as in the following. First, an analysis model is developed to verify damping characteristics through understanding of design intention. Second, environment which is identical to a field test is set up on analysis tool after putting explosive force that is measured through the test into the analysis model. Finally, the analysis model for recoil system using the multi-domain software is verified if it has effectiveness with a comparison between internal pressure of the recoil system along with displacement of gun barrel and the field test result.

• The Journal of Engineering Geology
• /
• v.12 no.2
• /
• pp.167-178
• /
• 2002

Properties of discontinuity for Seoul Granite in northeastern part of Seoul City were analyzed by dividing structural domains into Surak and Bulam Mtn. areas. Important parameters measured among several engineering properties of a rock during tunnel excavation and road construction are as follows: 1) Orientation of joint, 2) joint spacing, 3) joint density, and 4) uniaxial compressive strength. Orientation, spacing, and density of joints can be directly measured during field investigation using scanline survey, circle-inventory method, and window survey. Uniaxial compressive strength of the rock was calculated by a simple correlation equation although it is originally necessary to prepare core samples in measuring it. Major orientations of joints measured from both areas are 3 sets of joints with different orientations. In other words, they are 2 sets of orthogonal joint and 1 set of sheet joint that is dipping at low angle, and have very similar orientations in both areas. Joint densities in both areas range from 0.039 and 0.066/cm, and average joint length are between 1.30 and 4.52m. Average joint spacing also has values from 10.3cm up to 59.6cm, and shows significant difference along specific orientation of scanlines measured. Values of uniaxial compressive strength calculated on the basis of Schmidt hammer rebound values range from 217 to 335 MPa, which indicates very strong rock type by classification of wall strength.

• Journal of the Korean association of regional geographers
• /
• v.6 no.3
• /
• pp.1-36
• /
• 2000

Periodic markets of the later Choson dynasty had undergone fundamental changes during the late Chosun dynasty and Japanese colony period. This paper aims to analyse the spatial distributions and changes of the periodic markets in the middle stream of Han-River in this era in the use of the survey of documentary records and fieldwork. Before the early 1910s, long distance transportation was made by riverboats, short distance transportation was done by porters and pack animals. Because goods such as rice, soybean and salt were very heavy and needed long distance transport, they were mainly transported by riverboats. Accordingly, riverports on the shore of river played important roles in exporting and importing goods as nodes of long distance transportation. The opening of railroad Seoul-Busan, the construction of new roads(Sinjakno) of 1910s and the use of oxcarts produced striking changes in the spatial distribution and hierarchy structure of periodic markets. These changes also had influence on the outflow and inflow of goods in the middle stream of Han-River. In the parr of outflow of goods, it seems that the line linking Icheon city-Yongin city-Anseong city played a role in making the boundaries of the marketing areas between goods trams ported by the rail road Seoul-Busan and goods done by Han River river boats. Anseong, Osan and Suwon periodic markets located around railroad stations occupied the higher positions than those of other regions in the hierarchial structure of periodic markets. Their marketing areas could nearly overwhelm those of riverports located in the middle stream region of Han River and extend to the middle stream region of Han River as a result of decrease of transport cost through using of oxcarts and railroads. the opening of railroad Suwon-Yeoju(Suryoson) and railroad Cheonan-Janghawon(Cheonjangson) brought about changes of the structure of long distance trade again. In a part of outflow of goods, it seems that as a result of the new opening of their railroads periodic markets around railroads seized a large portion of the marketing area of the southern part of Yoju and Ichon area and therefore made extreme change in rivershipping of Han River. In the inflow part of goods, goods transported by riverboats from the downstream of Han River before the opening of railroad were imported directly from railroad stations. Accordingly, rivershipping and riverports declined. And because goods were imported by way of great periodic markets and supplied to small periodic markets and consumers before the opening of railroad, but supplied from railroad stations to small periodic markets and consumers after the opening of railroad. The volume of turnover of such great periodic markets as Anseong, Osan and Suwon periodic markets therefore declined. On the other hand, because Yangpyong area had not been yet included within the sphere of influence of railroad until 1930s, it heavily depended on rivershipping of Han River as before. But the opening of railroad Seoul-Wonju(jungangson) brought about decline of rivershipping in Yangpyong and Wonju area.

• The Journal of the Korea Contents Association
• /
• v.22 no.7
• /
• pp.73-80
• /
• 2022

In this study, prior studies of 280 small business owners in Korea over the past two decades were comprehensively analyzed through keyword network and LDA topic modeling analysis, and overall views and trends in academia were examined. As core keywords, "sales" and "protection," which conflict with each other but are essential for stable and sustainable growth were selected, and 7 topics (Topic 1: start-up, topic 2: digital, topic 3: tax system, topic 4: capability, topic 5: coexistence, topic 6: regulation, and topic 7: funding) were drawn up. Based on the results of the analysis, the need to improve digital maturity for the continued growth and development of small business owners was raised, and the response at the pan-ministerial level and the stability of the performance of functions that can survive even after the new administration to solve the economic damage problems facing small business owners were suggested. In addition, attention to the long-term, speed, detail, and direction of government support in a new way, and a flexible approach to the negative way in which pre-allowance and post-regulation is given were suggested.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.8 no.1
• /
• pp.3-12
• /
• 2006

The purpose of this study is to describe the Non-Destructive Testing(NDT) of the rockbolt and investigate the applicability of the NDT methods to estimate the integrity of the rockbolt. To examine the rockbolt integrity including rockbolt itself and grouting material, two methods are adopted: numerical and experimental methods. In the numerical method, the numerical code DISPERSE is used to analyze the dispersion of the rockbolt. The dispersion curve shows the effects of the thickness and stiffness of grouted materials on the embedded rockbolt. Therefore, the optimal frequency for the integrity test of the rockbolt is obtained: 20~120kHz in L(1,0) mode. In the experimental methods, destructive and non-destructive tests are carried out in a laboratory. In the non-destructive test, the low frequency mode generated by an impact and t he high frequency mode generated by an ultrasonic transducer seem to characterize the rockbolt condition readily. The experimental results show that the guided waves attenuate more significantly when the stiffness of the grouted material increases and/or the zone of the defect increases. Meanwhile, the ultimate capacity of rockbolt was evaluated through the pull-out tests and is compared to the NDT results. This study demonstrates that the NDT is a valuable tool for the rockbolt integrity evaluation.