• International Journal of Highway Engineering
• /
• v.11 no.1
• /
• pp.187-194
• /
• 2009

This paper presents the development of transfer function accounting for cross-anisotropic behavior of aggregate base material for the pavement thickness design. The stress distributions predicted by nonlinear cross-anisotropic finite element program were realistic by eliminating excessive tensile stress at the bottom of the base layer and the critical pavement responses predicted by nonlinear cross-anisotropic model are higher than those predicted by linear or nonlinear isotropic models (Kim, 2004, Kim et at., 2005). Since the previously developed transfer functions such as Asphalt Institute and Chevron models, etc. were based on the critical responses obtained from linear isotropic model, those equations are not appropriate for the thickness design nonlinear cross-anisotropic base behavior. Therefore, the development of usable transfer functions for nonlinear cross-anisotropic model is ever more important. When the newly developed transfer functions were compared with AASHTO method for the thickness design, the newly developed transfer functions produce approximately 25mm reduced UAB thickness in AASHTO thickness design and this illustrates that linear isotropic model results in more conservative pavement design.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2008.04a
• /
• pp.377-380
• /
• 2008

본 논문은 시간 지연을 가지는 비선형 상호 결합 시스템에 대한 분산 퍼지 출력 궤환 제어기를 제시한다. Takagi-Sugeno (T-S) 퍼지 모델링을 통하여 비선형 상호 결합 시스템을 퍼지 모델로 표현한다. 상호 결합 시스템의 하위 퍼지 시스템을 안정화 시킬수 있는 분산 출력 궤한 제어기를 설계한다. 폐루프 하위 시스템들의 안정도 조건을 선형 행렬 부등식으로 나태내고, 부등식을 이용하여 제어기의 이득값을 구한다. 모의실험을 통하여 시간 지연이 있는 비선형 상호 결합 시스템에 대한 분산 퍼지 출력 궤한 제어기의 효용성을 평가한다.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.11 no.3
• /
• pp.208-214
• /
• 2001

본 논문은 시변 입력 지연을 포함한 Takagi-Sugeno (TS) 퍼지 시스템으로 표현 가능한 비선형 시스템을 위한 체계적인 제어기의 설계 기법을 제안한다. 입력 지연은 화학 공정 시스템, 인터넷 기반 가상 실험실, 자율 이동 로봇의 원격 제어등, 실제의 산업 현장에서 매우 빈번히 발생하는 현상이며 제어 시스템의 성능을 감소시키며, 안정성을 저해하는 요소로 알려져 있다. 따라서 본 논문에서 다루고자 하는 문제는 매우 실제적인 문제이며 반드시 해결하여야 할 문제이다. 본 논문은 Lyapunov-Razumikhin 안정 이론에 기반하여 TS 퍼지 모델 기반 제어기의 설계 조건을 제시한다. 최종적인 제어기의 설계 조건은 선형 행렬 부등식의 형태로 주어진다. TS 퍼지모델 기반 제어기가 안정화시킬 수 있는 입력지연의 상한 값을 최대화하기 위하여 이중 최적화 기법을 도입한다. 제안된 제어기 설계 기법의 우수성과 타당성을 입증하기 위하여 모의 실험을 수행하였다. 컴퓨터 시뮬레이션 결과, 본 논문에서 제안한 타당성을 입증할 수 있다.

• Proceedings of the KIEE Conference
• /
• 2005.04a
• /
• pp.9-11
• /
• 2005

영구자석형 선형발전기의 설계에 있어서 주로 고려되어야 할 사항은 영구자석, 철심형 치 및 코일의 형상 설계이다. 또한 영구자석과 철심형 치의 상호 작용에 의한 디텐트력은 기기의 안정적인 성능을 위해 저감되어야 한다. 본 논문에서는 1kW급 왕복 구동 평판형 선형 발전기의 영구자석과 치의 구조에 따른 디텐트력과 역기전력의 변화를 유한요소법을 이용하여 해석하였고, 디텐트력의 저감을 위해 다양한 구조의 영구자석과 치 형상이 적용되었다. 기기 구조의 변화는 역기전력에도 영향을 끼치므로 적용된 설계안 중 역기전력의 손실을 최소화할 수 있도록 설계안의 적절한 선택이 필요하다.

• Journal of Korean Society of Transportation
• /
• v.23 no.5 s.83
• /
• pp.113-120
• /
• 2005

Highway geometric design aims to provide drivers with safe and efficient road conditions. Highway design method of Korea doesn't consider demand characteristics of drivers, vehicles etc. Therefore there is a gap between designer's expectation and user's behavior and it hinders to make safer roads. It is required to develop the geometric design criteria and design method based on driving characteristics to provide safe and flexible design. This study suggested a geometric design method of horizontal curves on rural 4-lane highways based on speed distribution.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.22 no.3
• /
• pp.259-265
• /
• 2009

This paper studies the Element Connectivity Parameterization Method(ECP method) for topology optimization considering dynamic compliance. The previous element density based topology optimization method interpolates Young's modulus with respect to design variables defined in each element for topology optimization. Despite its various applications, these element density based methods suffer from numerical instabilities for nonlinear structure and multiphysics systems. To resolve these instabilities, recently a new numerical method called the Element Connectivity Parameterization(ECP) Method was proposed. Unlike the existing design methods, the ECP method optimizes the connectivities among plane or solid elements and it shows some advantages in topology optimization for both nonlinear structure and multiphysics systems. In this study, the method was expanded for topology optimization for the dynamic compliance by developing a way to model the mass matrix in the framework of the ECP method.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.35 no.2
• /
• pp.120-127
• /
• 2015

In this paper, a linear-array transducer capable of overcoming the faults of a single element and phased array transducers with convex shape for non-destructive ultrasonic testing was designed and fabricated. A 5.5 MHz linear-array transducer was designed using the PiezoCAD program based on the KLM analysis and the PZFlex program based on the FEM analysis. A 2-2 composite structure was employed to achieve broad-band characteristics. A 128 element linear-array transducer was fabricated and its performance was compared with the simulation results. The center frequency of the fabricated transducer was 5.5 MHz and the -6 dB frequency bandwidth was 70 %. Thus, we expect that the designed transducer can provide an effective inner image of the test material during non-destructive ultrasonic testing.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.19 no.3
• /
• pp.337-342
• /
• 2009

This paper concerns delay-range-dependent robust stability and stabilization for time-delay nonliner system via T-S fuzzy model approach. The time delay is assumed to be a time-varying continuous function belonging to a given range. On the basis of a novel Lyapunov-Krasovskii functional, which includes the information of the range, delay-range-dependent stability criteria are established in terms of linear matrix inequality. It is shown that the new criteria can provide less conservative results than some existing ones. Moreover, the stability criteria are also used to design the stabilizing state-feedback controllers. Numerical examples are given to demonstrate the applicability of the proposed approach.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.8
• /
• pp.693-700
• /
• 2016

In this paper, it is represented that equations for design of linear interferometer antenna when the 3 dB beamwidth is only region of interest. Using the equations, relationships between angle measurement ambiguity and element antenna spacings are described. And then, operating frequency, angle measurement accuracy, beamwidth, correct measurement probability are calculated for five antennas interferometer to measure azimuth and elevation angle. The interferometer antenna was designed and fabricated using the calculated parameters. The angle measurement accuracy were $0.01^{\circ}$ and $0.016^{\circ}$ for azimuth and elevation axes with 99 % probability of doing measurements correctly which means that ambiguous solution did not occur more than 1 % of the time. These results validated the equations and design procedures.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1741_1742
• /
• 2009

본 논문은 측정 실패가 존재하는 비선형 시스템에 대한 동적 출력 궤환 퍼지 제어기의 설계에 대해 연구한다. 비선형 시스템을 Takagi-Sugeno (T-S) 퍼지 모델 기법을 이용하여 퍼지 시스템으로 모델링하고, 이를 바탕으로 동적 출력 궤환 퍼지 제어기를 설계한다. 폐루프 시스템의 안정도 조건을 선형 행렬 부등식 (LMI)로 나타낸다. 그리고 모의실험을 통해 제안된 제어기의 성능을 파악한다.