• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.30 no.1
• /
• pp.36-43
• /
• 2002

Thermopiezoelastic snap-through phenomena of piezolaminated plates are investigated by applying an are-length scheme to Newton-Raphson method. Based on the layerwise displacement theory and von Karman strain-displacement relationships, nonlinear finite element formulations are derived for the thermopiezoelastic composite plates. From the static and dynamic viewpoint, nonlinear thermopierzoelastic behavior and vibration characteristicx are stuied for symmetric and eccentric structural models with various piezoelestric actuation modes. Present results show the possibility to enhance the performance, namely thermopiezoelastic snapping, induced by the excessive piezoelectric actuation in the active suppression of thermally buckled large deflection piezolaminated paltes.

• Journal of the Korean Geotechnical Society
• /
• v.21 no.4
• /
• pp.123-134
• /
• 2005

A coupled three-dimensional pile group analysis method (YSGroup) was developed considering nonlinear pile head stiffness matrices and compared with other analytical methods (elastic displacement method, Group 6.0 and FBPier 3.0). In this method, a pile cap was modelled by four-node flat shell element, a pier was modelled using 3 dimensional beam element, and individual piles were modelled as beam-column elements. Through the comparative studies on a piled pie. subjected to lateral loads in linear soil, it was found that present method (YSGroup), elastic displacement method and Group 6.0 gave similar results of lateral pile head displacement, but FBPier 3.0 was estimated to show somewhat larger displacements than those from the three methods. Displacements of superstructure (pier), including nonlinear soil behavior, could be estimated by present method (YSGroup) and FBPier 3.0 because these two methods modelled the superstructure directly by finite element techniques. It was found that pile groups in pinned pile head condition had a tendency to cause excessive rotation of the pile cap.

• Journal of Korean Association for Spatial Structures
• /
• v.10 no.4
• /
• pp.49-57
• /
• 2010

This study is the research appling the representative Displacement-Based Design which is the basic concept of Direct Displacement Based Design proposed by Chopra and Goel to original Reinforced Concrete structure and determining the thickness of retrofit Steel Jacket about the Maximum design ground acceleration, and developing the more improved Algorithm as well as program by the Retrofit Design method and Nonlinear analysis by the Performance design method before and after reinforcement appling the determined retrofit thickness. To predict the target displacement of retrofitted columns, a nonlinear analysis model of reinforced concrete columns has been developed to be based on the nonlinear fiber cross-sectional and segmental analysis model, and the seismic displacement level of retrofitted columns is estimated by two procedures, the direct displacement-based design method and the displacement coefficient method. In examples of seismic retrofit design, the current seismic improved design method gives good results in improvements of displacement levels and displacement ductilities of retrofitted columns.

• Proceedings of the KAIS Fall Conference
• /
• 2010.11b
• /
• pp.813-816
• /
• 2010

본 논문에서는 자동차 배기계를 구성하고 있는 Flexible Tube의 형상에 따른 응력 해석 결과를 이용하여 피로 해석을 하였다. 아울러 Flexible Tube의 변위량이 크게 발생하는 것을 고려하여 기하학적 비선형 해석을 실시하였으며 Flexible Tube의 변형량은 끝단에서 6mm의 변위가 발생하도록 하였다. 본 연구에서 얻어진 결과는 다음과 같다. (1) Tube의 반경이 증가하면 피로한계 응력반복수는 선형적으로 감소한다. (2) 본 연구에서 사용된 tube중 주름의 반경이 1.7mm일때 피로 수명이 가장 긴 것을 알 수 있다.

• Proceedings of the KIEE Conference
• /
• 1997.07b
• /
• pp.571-574
• /
• 1997

항법장치의 핵심요소인 가속도센서와 자이로센서는 선형거리추측(Linear position estimation)과 각 변위 추측(orientation estimation)시 출력 데이터에 포함된 오차성분의 적분에 의하여 시간이 증가함에 따라 선형거리 오차와 각 변위 오차가 누적된다. 이에 따라 본 논문에서는 정밀한 항법을 위한 저가의 IMU (Inertial Measurement Unit)를 설계하고, 오차성분의 사전해석을 통하여 정확한 오차모델을 찾는데 그 목적이 있다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.153-153
• /
• 2004

반도체 공정과 같은 정밀 위치제어가 요구되는 분야에서 높은 해상도와 큰 구동 거리를 가지는 정밀 스테이지의 수요가 점차 증가하고 있다. 압전 액추에이터에 의해 구동이 되는 정밀 스테이지는 이와 같은 용도에 적합한 것으로 여겨지고 있고, 이에 대한 연구가 많이 이루어지고 있다. 본 연구에서는 압전 액추에이터로 구동하는 2축 정밀 스테이지가 연구 대상이다. 요구되는 스테이지 변위가 커서 압전 액추에이터의 변위만으로 원하는 변위를 얻을 수 없으므로, 유연힌지가 포함된 레버구조를 이용하여 최초 변위를 3 배 이상으로 확대시키는 구조로 되어있다.(중략)

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1993.10a
• /
• pp.21-27
• /
• 1993

매개변수가진에 종속되는 현의 횡방향진동을 시간영역에서 필터작업, 힐버트 변환과 순간주파수 개념을 도입하여 해석함으로서 종방향의 순간진동변위를 추정하는 방법이 제시되었다. 그리고, 실험을 통하여 이론의 타당성을 검증 하였다. 또한, 모의 실험의 결과 일반적인 현구동계에 있어서는 넓은 적용변 수의 선\ulcorner영역에서 종변위가 횡변위와 분리(decoupling) 되어서 공간적으로 길이에 따르는 선형적인 증가성과 시간적으로 조화적인 주기성을 가진다는 것을 확인함으로서 임의의 위치에서의 종변위를 파악함이 가능하였다.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.20 no.5
• /
• pp.623-628
• /
• 2007

The accurate peak response estimation of a seismically excited structure with frictional damping system(FDS) is very difficult since the structure with FDS shows nonlinear behavior dependent on the structural period, loading characteristics, and relative magnitude between the frictional force and the excitation load. Previous studies have estimated that by replacing a nonlinear system with an equivalent linear one or by employing the response spectrum obtained based on nonlinear time history and statistical analysis. In the case that an earthquake load is defined with probabilistic characteristics, the corresponding response of the structure with FDS has probabilistic distribution. In this study, nonlinear time history analyses were performed for the structure with FDS subjected to artificial earthquake loads generated using Kanai-Tajimi filter. An equation for the probability density function (PDF) of the displacement response is proposed by adapting the PDF of the normal distribution. Finally, coefficients of the proposed PDF are obtained by regression analysis of the statistical distribution of the time history responses. Finally the correlation between PDFs and statistical response distribution is presented.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.4A
• /
• pp.659-675
• /
• 2006

Recently, significant progress has been made in performance-based engineering methods that rely mainly on nonlinear static seismic analysis procedures. The Capacity Spectrum Method (CSM) and the Displacement Coefficient Method (DCM) are the representative nonlinear static seismic analysis procedures. In order to evaluate the applicability of the procedures to the seismic evaluation and design process of new and existing structures, the accuracy of both CSM and DCM should be evaluated in advance. The accuracy of seismic responses by the nonlinear static procedures is evaluated in comparison with the shaking table test results for the structural wall specimen subjected to the far field and near field earthquakes. Also conducted are comparative studies where the shaking table test results are compared with those from nonlinear dynamic analysis procedures, i.e., Single-Degree-of-Freedom (SDOF), equivalent SDOF and Multi-Degree-of-Freedom (MDOF) systems.

• Korean Journal of Optics and Photonics
• /
• v.15 no.5
• /
• pp.415-422
• /
• 2004

We propose and present a new multiplexed bend loss type single-mode fiber-optic sensor system for displacement measurement in order to measure the displacement of several mm of civil engineering structures such as bridges and buildings. We make a bend loss type fiber-optic sensor for measuring displacements using the signal difference between two reflection signals due to various bend losses generating at a pair of optical connectors by using the optical time domain reflectometer. And we fabricate a multiplexed bend loss type fiber-optic sensor detecting linear displacements of 4 measuring positions of an object by setting these new 4 fiber-optic sensors on a single mode fiber simultaneously. We find that the multiplexed fiber-optics displacement sensor has linearity of 0.9942, maximum displacement of 6 mm, and accuracy of 6% for 4 measuring points.