• Applied Chemistry for Engineering
• /
• v.17 no.5
• /
• pp.561-564
• /
• 2006

$SnO_{2}$-doped anatase type $TiO_{2}$ powder was prepared by the polymerization complex route from tin(IV) bis (acetylacetonate) dichloride, titanium diisopropoxide bis (acetylacetonate) and polyethylene glycol (PEG) as a complexing agent. The structural changes of reaction mixture were monitored by fourier transform infarared (FT-IR) spectroscopy. The microstructure and morphology of gel powder were studied by field-emission scanning electron microscopy (FE-SEM) and X-ray diffractometry (XRD). The photocatalytic activity of these powders with the anatase structure was investigated by using indigo carmine solution.

• Korean Journal of Materials Research
• /
• v.9 no.11
• /
• pp.1062-1068
• /
• 1999

고정원으로부터 배출되는 질소산화물의 저감 기술 중에서 선택적 촉매 환원법(SCR법)은 가장 경제적이고 효율적인 방법으로 알려져 있다. 이 SCR 촉매의 탈질능을 향상시키기 위하여,$ TiOSO_4$ 및 Ti($SO_4$)$_2$용액으로부터 비표면적이 넓은 $TiO_2$의 비표면적 및 결정구조에 미치는 영향과 이들의 상관관계에 대하여 조사하였다. $TiOSO_4$용액으로부터 합성한 $TiO_2$의 최대 비표면적은 $382\m^2$/g이었고, Ti($SO_4$)$_2$용액으로부터 합성한 $TiO_2$의 최대 비표면적은 $335\m^2$/g이었으며, $TiO_2$는 비정질 형태의 결정구조를 보였다. 하소처리에 의해 비정질 $TiO_2$는 결정화되었고, 결정 중에 함유되어 있는 불순물은 $TiO_2$의 결정화를 억제하였다.

• Korean Chemical Engineering Research
• /
• v.59 no.1
• /
• pp.112-117
• /
• 2021

In this study, a method of self-assembly of peptides based on irreversible covalent bonds was studied by mimicking a biological covalent bond, dityrosine bond. A tyrosine-rich short peptide monomer having the sequence of Tyr-Tyr-Leu-Tyr-Tyr (YYLYY) was selected to achieve a high-density of dityrosine bond. The peptide nanoparticles covalently self-assembled with dityrosine bonds were synthesized by one-step photo-crosslinking of a peptide using a ruthenium catalyst under visible light. The effect of the concentration of each component for the size of the peptide nanoparticle was studied using dynamic light scattering, UV-Vis spectroscopy, and transmission electron microscopy. As a result, the synthesis conditions for size of the peptide nanoparticles ranging from 130 nm to 350 nm were optimized.

• Applied Chemistry for Engineering
• /
• v.10 no.2
• /
• pp.252-258
• /
• 1999

Tetramethyl orthosilicate (TMOS) was obtained by the direct synthesis of methanol with metallic silicon including copper compound as a catalyst and zinc compound as a promoter. The effects of the preheating temperature and the preparation method of the contact mass on TMOS synthesis were investigated. The composition effects of the contact mass which was composed of metallic silicon with copper catalyst and various metallic halide promoters including Zn, Sn or Cd compound were studied also. The best performance on TMOS synthesis was observed on a mixed bed reactor containing metallic silicon preheated with CuCl as a catalyst and $ZnCl_2$ as a promoter. When Cu/Si = 7 wt %, Zn/Cu = 7 wt % was mixed in a slurry phase and activated into contact mass at $380^{\circ}C$, the average selectivity was 87.2% in the silicon consumption of 69.2% at $220^{\circ}C$.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.31 no.2
• /
• pp.78-83
• /
• 2021

In this study, we prepared NiCo2O4 nanoparticles with large surface area by hydrothermal synthesis. In order to optimize the processing conditions for spinel NiCo2O4 nanoparticles with large surface area, experimental variables including concentration of Ni and Co precursor, reaction time, and temperature for post-heat treatment were evaluated. Optimized conditions for spinel NiCo2O4 with large surface area were [Ni]/[Co] 1:2 ratio, reaction time for 12 h, and post-heat treatment at 400℃. To investigate the feasibility as potential application for glucose sensor, electrochemical tests of the prepared NiCo2O4 nanoparticles in response to glucose was performed, which suggests that the NiCo2O4 can be suitable for a non-enzymatic-based electrochemical glucose sensor based on its high sensitivity and selectivity for glucose detection.

• The Korean Journal of Food And Nutrition
• /
• v.25 no.1
• /
• pp.17-25
• /
• 2012

이 연구는 블루베리 즙을 첨가하여 젤리의 제조조건을 최적화하고자 하였다. 16개의 블루베리 즙을 이용한 젤 시료는 Design Expert 프로그램을 이용하여 제조하였으며, 최적화를 위해 블루베리 즙(100~200 g), 설탕(40~160 g), 젤라틴(8~20 g)의 양을 독립변수로, 텍스처, pH, 관능평가 항목을 종속변수로 각각 선정하였다. 반응표면 분석법을 사용하기 위한 실험설계로 중심합성계획을 이용하였다. 각 항목별 최적조건은 Canonical 모형의 수치 최적화(numerical optimization)과 모형적 최적화(graphical optimization)를 통하여 선정하였으며, 그 중 가장 높은 desirability를 갖는 최적점을 선택하여 지점 예측(point prediction)을 통해 도출한 결과, 각 독립변수의 예측된 블루베리 즙을 첨가한 젤리의 최적값은 블루베리 주스 133.63 g, 설탕 160.0 g, 젤라틴은 12.78 g이었다.

• Membrane Journal
• /
• v.16 no.1
• /
• pp.25-30
• /
• 2006

The NaA zeolite membrane was synthesized on the surface of a porous ${\alpha}$-alumina support from the reaction solution composed of 1Si : 1Na : 4Na $6H_{2}O$. The pervaporation performance of the synthesized NaA zeolite membrane was investigated for the iso-propyl alcohol (IPA) aqueous solution according to the different feed concentration and the different operating temperature. The total flux decreases by increasing the feed IPA concentration and increases by increasing the temperature. The total flux was about $4.0{\times}10^3g/m^2\;hr\;at\;60^{\circ}C$ and 0.6 mole fraction of IPA and the separation factor was $1.8{\times}10^7\;at\;60^{\circ}C$ and 0.8 mole fraction of IPA. The separation performance of water through the NaA membrane was found to be superior to that obtainable with a distillation process just by comparison of the vapor-liquid equilibrium data.

• Journal of the Korean Chemical Society
• /
• v.30 no.1
• /
• pp.84-89
• /
• 1986

A newflexible $N_2O_2$-type tetradentate ligand. Ethylenediamine-N,N'-di-${\alpha}$-isobutyric acid(eddib), has been synthesized, and dichloro cobalt(III) complex of eddib has been prepared via the air-oxidation technique. Only S-cis isomer has been yielded during the preparation of complex. Ring strain and steric hinderance are cited as the cause for the preference for the S-cis geometric configuration. On series of cobalt(III) complexes of eddib, $[Co(eddib)L]^{n+}$ $(L = Cl{\cdot}(H_2O),\;CO_3^{2-},\;(H_2O)_2)$have been prepared in situ. In their electronic absorption spectra, the absorption maxima and their intensities of the above series of complexes are on the ordinary line of the spectrochemical and hyperchromic series. Elemental analysis, IR, NMR and electronic absorption spectra have been used to characterize the complex and geometries of the complex.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.95-95
• /
• 2000

탄소나노튜브는 그 고유한 전자적, 기계적 특성 때문에 미래의 여러 전자부품 소재로서의 무한한 가능성을 지니고 잇는 것으로 알려져 있으며, 최근에는 디스플레이의 전자방출소자로서 관심이 집중되고 있다. 특히, 큰 aspect ratio를 갖는 나노튜브의 특성 때문에 높은 전계향상효과를 얻을 수 있으므로, 전계방출디스플레이의 음극소재로서 유망하다. 하지만 탄소나노튜브가 전계방출디스플레이의 음극소재로서 적용되기 위해서는 수직배향, 전자방출의 ebs일성 및 장시간 안정성, 그리고 낮은 온도에서의 성장 등의 문제점들이 해결되어야만 한다. 탄소나노튜브의 여러 제조방법들 중에서 위에서 제시된 문제점들을 해결할 수 있는 것으로써 CVD 법이 제일 유망하며, 이는 CVD 공정이 여러 제조 방법들 중에서 가장 낮은 온도조건에서 나노튜브의 합성이 가능하고, 저가격, 특히 응용 디바이스에 기존의 공정과 호환하여 사용될 수 있는 장점이 있기 때문이다. 본 연구에서는 열 CVD 공정에 의해서 탄소나노튜브를 제조한후, 그 물성 및 전계 방출 특성을 평가하였다. 특히 CVD 공정을 이용한 탄소나노튜브의 제조시 필수적으로 요구되는 촉매의 형태 및 물성을 바꾸어 줌으로써, 성장하는 나노튜브의 수직 배향성, 밀도 등의 물성을 변화시켰으며, 촉매가 나노튜브의 성장에 미치는 영향을 고찰하였다. 이러한 다양한 물성 및 형태를 갖는 나노튜브를 제조한 후, 형광체를 이용한 발광형상을 통해 전계방출 현상을 관찰함으로써, 전계방출소재로서의 우수한 특성을 나타낼 수 있는 탄소나노튜브의 제조조건을 확립하고자 하였다. 또한 고밀도의 탄소나노튜브에서 나타날 수 있는 방출면적의 감소 및 불균일성을 해결하고자 탄소나노튜브를 기판에 선택적으로 성장시킴으로써 해결하고자 하였다. 또한 위에서 언급된 열 CVD 공정을 이용한 탄소나노튜브의 제조 및 평가 이외에 보다 더 낮은 온도에서의 탄소나노튜브 합성을 위하여 본 연구에서는 열 CVD 공정에 플라즈마를 첨가하여 저온합성을 유도하였다. 일반적인 열CVD 공정은 80$0^{\circ}C$에서 진행되었으나 플라즈마를 도입한 공정에서는 그 제조온도를 $600^{\circ}C$정도로 낮출 수 있었으며, 이에 따른 물성 및 전계 방출 특성을 위와 비교, 평가하였다.

• Korean Chemical Engineering Research
• /
• v.53 no.3
• /
• pp.391-396
• /
• 2015

To investigate the effect of the catalyst synthesis method on the oxidative dehydrogenation (ODH) of nbutenes, $BiFe_{0.65}MoP_{0.1}$ oxide catalysts were prepared with various synthesis methods such as co-precipitation, citric acid method, hydrothermal method, and surfactant templated method. The catalysts were characterized by X-ray Diffraction (XRD), $N_2$ sorption, and $NH_3/1$-butene-temperature programmed desorption ($NH_3/1$-butene-TPD) to correlate with catalytic activity in ODH reaction. Among the catalysts studied here, $BiFe_{0.65}MoP_{0.1}$ oxide catalyst prepared with co-precipitation method marked the highest activity showing 1-butene conversion, 79.5%, butadiene selectivity, 85.1% and yield, 67.7% after reaction for 14 h. From the result of $NH_3$-TPD, the catalytic activity is closely related to the acidity of the $BiFe_{0.65}MoP_{0.1}$-x oxide catalyst and acidity of the $BiFe_{0.65}MoP_{0.1}$ oxde catalyst prepared with co-precipitation method was higher than that of other catalysts. In addition, combined with the 1-butene TPD, the higher catalytic activity is closely related to the amount of weakly adsorbed intermediate (< $200^{\circ}C$) and the desorbing temperature of strongly adsorbed intermediates (> $200^{\circ}C$).