• Journal of the Korean Magnetics Society
• /
• v.5 no.6
• /
• pp.928-936
• /
• 1995

In this research, the processing control of NiCuZn Ferrite has been developed. The mixing and the size reduction of raw materials have been proceeded. In order to produce NiCuZn Ferrite, highly concentrated slurry with fixed ratio and wet ball milling were used. First, the dispersion behavior of raw mixture at the region of pH4~pH11 has been studied. Using wet ball milling operation, the best conditions of mixing and size reduction have been determined. Further more, the most suitable conditions, such as, dispersant kind, dispersant amount, milling time, and slurry concentration have been studied. The poly acrylic ammonium salt (PAN) was chosen as a suitable dispersant to have effective dispersion in basic region. The slurry of raw mixture without dispersant, showed high viscosity and poor grindability. As 0.7 wt% of PAN was added, the concentrated slurry (up to 55 vol%) was possible, and showed well grindability. After 18 h ball milling of 30 vol% of mixture slurry with 0.7 wt% of PAN, the average particle size and specific surface area of raw mixture were $0.54\mu\textrm{m}$ and $12.92m^{2}/cc$, respectively. The ball milled raw mixture, calcined at $700^{\circ}C$ for 3h, was totally changed into NiCuZn Ferrite with spinel phase.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2015.11a
• /
• pp.224-225
• /
• 2015

폐솔더 박리액으로부터 주석 및 구리의 분리를 위하여 옥살레이트 침전을 통해 각각 금속염으로 회수하기 위한 기초 연구를 실시하였다. 먼저 옥살산의 첨가량에 따라 주석의 침전율이 증가하였으며 당량비(옥살산/주석)의 1.0-1.5배를 첨가할 경우 주석이 99.5%, 구리는 2.0% 정도 침전되었고 철, 납 등은 거의 침전되지 않아 주석만 선택적으로 침전되는 것을 확인 하였다. 반응온도 증가에 따라 주석의 침전율은 증가하여 $60^{\circ}C$ 부근에서 최대값을 보이다가 온도가 더 증가하면 오히려 감소 경향을 보였다. 침전물의 고액분리 용이를 위해 카티온성 고분자 응집제를 이용하여 침강시킨 후, 분리된 침전물을 건조, 분쇄하여 $SnO_2$의 산화물을 얻을 수 있었다. 주석이 제거된 폐솔더 박리액에 옥살산을 첨가하여 구리가 약 91% 이상 침전되어 납, 철 등의 금속과 분리하여 선택적으로 회수가 가능하였다.

• The Journal of Engineering Geology
• /
• v.20 no.2
• /
• pp.183-189
• /
• 2010

Fault gouge samples were collected from the fault cores of the boundary faults between the Cretaceous Basement and the Tertiary Waeup Basin. Fractal dimensions (D) were obtained by using survivor grains which were analysed from six thin sections of the gouges under the optical microscope. The elliptical survivor grains show a shape preferred orientation almost parallel to clay foliation in matrix, suggesting that it was formed by the rotation of the survivor grains in abundant fine-grained matrix during repeated fault slips. The size distributions of the survivor grains follow power-laws with fractal dimensions in the 2.40-3.02 range. D values of all samples but one are higher than a specific D value equal to 2.58 which predicts the self similarity of fragmentation process in constrained comminution model (Sammis et al., 1987), which indicates large fault slip and multiple faulting. Probably the higher D values than 2.58 mean the non-self-similar evolution of cataclastic rocks where fragmentation mechanism changed from constrained comminution to the grain abrasion accompanying selective fracture of larger grains.

• Journal of the Mineralogical Society of Korea
• /
• v.21 no.4
• /
• pp.383-395
• /
• 2008

To enhance the grade and recovery rate of the gold/silver ores which yield at Philippine Mankayan mine, we studied the characteristics which are the geologic and mineralogical features of gold and silver ore, the liberation by crushing and grinding, the separation by sieving and shaking table. Gold/silver ore is composed of the sulfide minerals like pyrite, sphalerite, galena; and the gangue minerals which is quartz, clay. Gold/silver element are mainly contained in a sulfide minerals like pyrite, sphalerite and galena. To increase the liberation rate of sulfide minerals containing gold/silver element, the gold/silver ore has to be grounded under $100{\mu}m$ very finely because the crystal size of sulfide minerals is distributed from $1{\mu}m$ to $100{\mu}m$. The liberation rate of gold/silver ore increases to 92% when the particle size ($d_{90}$) of ore is grounded below $100{\mu}m$ by jaw crusher $\to$ cone crusher $\to$ rod mill by steps. The grade and recovery of sulfide minerals could not be enhanced by sieving separation because those crystal size is distributed homogeneously below $100{\mu}m$. But, when we separated the sieved ore using shaking table, the gold and silver grade increased to 40 ppm and 140 ppm, respectively. Then the recovery rate of gold reach almost 100% but that of silver is no more that 50%.

• Explosives and Blasting
• /
• v.19 no.1
• /
• pp.111-116
• /
• 2001

발파한 후 파쇄된 암석의 파쇄도는 발파효율을 나타내는 척도의 하나로서 발파방법을 평가하는 주요 인자이다. 파쇄도는 적재작업과 재활용을 위한 분쇄작업에 큰 영향을 미친다. 그러나 현장규모로 쌓여 있는 발파암 더미로부터 파쇄도를 조사한다는 것은 용이한 작업이 아니다. 본 논문에서는 현장 사례연구로서 터널발파에서 가장 중요한 요소인 심빼기 방법 중 경사공을 이용한 V형 심빼기와 수평공 무장약공을 이용한 Bum 심빼기 발파방법중 파쇄도 측면에서 더 효율적인 방법을 선택하기 위하여 발파후 파쇄된 암을 사진 촬영하여 이미지 분석을 실시하고 몇 가지 파쇄입도 예측식을 이용한 분석 결과와 비교하였다.

• Resources Recycling
• /
• v.11 no.4
• /
• pp.44-50
• /
• 2002

Characteristics on the sulfuric acid leaching of zinc and manganese from the spent zinc-carbon battery powders obtained by cushing and magnetic separation, were investigated with the variation of sulfuric acid concentration, reaction temperature, stir-ring speed and solid/liquid ratio. The sample powders were composed of Zn metal, ZnO, $MnO_2$ and $Mn_2$$O_3$. and it was found that the selective leaching of zinc was difficult in this system. At the condition of S/L ratio 1:10, IM H$_2$$SO_4$, $60^{\circ}C$ and 200 rpm, leaching rate of Zn and Mn are 92% and 35% respectively. The concentration of Zn and Mn in the leaching solution are 19.5 g/l, 7.8 g/l and pH of that solution is 0.75. It was confirmed at reducing agent should be added to increase e leaching rate of manganese with sulfuric acid.

• Resources Recycling
• /
• v.27 no.4
• /
• pp.57-64
• /
• 2018

Water leaching of tungsten(W) and vanadium(V) was researched from their oxides through mechanochemical (MC) reaction with alkali compounds. Intensive grinding for the mixture of tungsten/vanadium oxide and alkali compounds (NaOH, $Na2CO_3$) was carried out with change of their mixing ratios and grinding duration. Water soluble compounds, $Na_2WO_4$ and $NaVO_3$, were synthesized through MC reaction and their solubilities increased in proportion to the mixing ratio of sodium compound and grinding times. Whereas vanadium leachability was less affected by the mixting ratio and grinding times. The leachabilities of 99.0% were accomplished by a short period of MC treatment, W (30 min.) and V (5 min.). This process enable us to extract W and V from their oxides via a water leaching, and can be applied to the selective recovery of W and V from $DeNO_x$ spent catalysts.

• Clinics in Shoulder and Elbow
• /
• v.10 no.1
• /
• pp.84-91
• /
• 2007

Purpose: The aim of this study was to report seven cases of metallic radial head prosthesis and present the limit of use in Korea. Materials and Methods: Metallic radial head arthroplasty was performed on 7 patients between April 2006 and December 2006, who had complex elbow injury including comminuted radial head fracture. Indication, operative findings and outcome were assessed. Availability and payment of implant were investigated. Results: All of the patients had more than one associated injury including coronoid fracture, olecranoan fracture, and ligament ruptures. According to Mason classification, there were three type III and four type IV fractures. All radial head fractures were too comminuted to reconstruct. There were two excellent results, four good, and one poor, as graded by Mayo score. There were no patient with instability and implant related complications. Insufficient supply of implant did not enable to do scheduled surgery in 2 cases. Current medical insurance did not cover charge for radial prosthesis, five patients could not help paying for that by themselves. Conclusion: Metallic radial head implants are useful when the radial head cannot be repaired reliably. Preoperative preparing and coverage by medical insurance based on appropriate indication are helpful for decision for a treatment option.

• Food Science and Preservation
• /
• v.23 no.1
• /
• pp.20-26
• /
• 2016

In this study, the anti-inflammatory effect of hyaluronidase (HAase) inhibition was determined from 92 species of oriental herbal medicine extracted with water and ethanol solvents because of their non-toxicity in the human body. The water extracts of Evodia officinalis (86.8%), Thuja orientalis (80.8%), Carthami semen (66.5%), Melia azedarach (74.7%), Siegesbeckia pubescens (61.3%), Saururus chinensis (49.15%) showed a relatively greater anti-inflammatory activity. The ethanol extracts of Ailanthus altissima and Saururus chinensis demonstrated the highest anti-inflammatory effect at above 90%. Saururus chinensis was selected for its high anti-inflammatory effect in both water and ethanol extract. Ethanol was more effective than water and optimal extraction conditions for phenolic compounds was determined to be extraction with 50% ethanol for 12 hours. The extracts from Saururus chinensis in optimal condition showed 70~80% anti-inflammatory effect when $100{\sim}250{\mu}g/mL$ phenolic concentration was treated. Concentration of above $500{\mu}g/mL$ decreased the inhibitory effect. The anti-inflammatory effect and extraction yield were increased by ultra-fine grind technology, indicating that this method can be used to increase the extraction yield of phenolic compounds from medicinal plants.

• Korean Journal of Food Science and Technology
• /
• v.43 no.1
• /
• pp.119-123
• /
• 2011

In this study, performances of culture methods using two selective media and real-time PCR were evaluated for detection of Campylobacter jejuni (C. jejuni) in various food samples. Sausage, ground beef, and radish sprouts inoculated with C. jejuni were enriched in Hunt broth and then streaked onto modified cefoperazone charcoal deoxycholate agar and Preston agar, followed by incubation under microaerobic conditions. The enriched Hunt broth (1 mL) was used in real-time PCR assay. No statistical differences were observed in sensitivity among the two selective media and real-time PCR for sausage and ground beef. However, the number of positives by real-time PCR in radish sprouts was much higher than the two selective media (p<0.05). It appears that real-time PCR could be used as an effective screening tool to detect C. jejuni, particularly in foods with a high number of background microflora such as fresh vegetables.