• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.27 no.9
• /
• pp.15-22
• /
• 2013

A new LED lamp driving technology with a charge pump instead of a conventional DC-DC converter is proposed. The proposed driving technology is used to control the LED lamp with digital dimming. The power loss in the zener diodes is reduced because the charging process of the capacitors is selectively controlled according to the digital control signal. From the experimental results, when dimming four LED lamps simultaneously, the average driving circuit efficiency of 89% is obtained, regardless of the dimming level. White light with color temperature over a range of 2800~7200K was produced by dimming control of red, green, blue and amber LED lamps with the proposed driving circuit. The characteristics of the driving circuits can be changed depending on the characteristics of the R, G, B, and A LED lamps. The efficiency of the driving circuits up to a maximum 89% can also be obtained depending on the combination of LED lamps. The driving technology with digital dimming control for LED lamps proposed in this paper would be effective for obtaining high efficiency in LED driving circuits and remote control of LED lamps using digital communications.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.20 no.3
• /
• pp.380-387
• /
• 2010

For the fault diagnosis of three-phase induction motors, we propose a diagnosis algorithm based on mutual information and linear discriminant analysis (LDA). The experimental unit consists of machinery module for induction motor drive and data acquisition module to obtain the fault signal. As the first step for diagnosis procedure, DFT is performed to transform the acquired current signal into frequency domain. And then, frequency components are selected according to discriminate order calculated by mutual information As the next step, feature extraction is performed by LDA, and then diagnosis is evaluated by k-NN classifier. The results to verify the usability of the proposed algorithm showed better performance than various conventional methods.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.6
• /
• pp.1051-1055
• /
• 2008

If ZnS receive electric energy, it can generate light. Thin film ELD has merits of excellent sight effect, solid state and easy fabrication but has problems of low emission density, high power loss and high operating voltage. Thin film deposited by electron beam evaporator has good uniformity of 6%. We fabricate excellent thin film ELD for solution of this problems. The thin film ELD made in this study has brightness of 650fL at yellow light and 350fL at green light.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.6
• /
• pp.1053-1058
• /
• 2021

This paper presents the multi-band mixer which converts a X-, K- and Ka-band adaptively by adjusting the gate-bias voltage of an active device. The proposed mixer presented a conversion loss of -10 dB at -0.8 V gate-bias voltage for X-band, a conversion loss of -9 dB at -0.3 V gate-bias voltage for K-band and for Ka-band, a conversion loss of -7 dB at -0.2 V gate-bias voltage under the LO power of +6.0 dBm. The 1dB compression point (P1dB) is +0.5 dBm for all band.

• Journal of Chest Surgery
• /
• v.39 no.3 s.260
• /
• pp.230-235
• /
• 2006

Systemic arterialization of lung with/without sequestration (Sequestration/Anomalous Origin of Left Pulmonary Artery, AOLPA) is a rare form of congenital anomalous systemic arterial supply to the lungs. In this anomaly, the arterial supply of one or more arteries of the basal segments of the lower lobe derives from an aberrant vessel arising from the aorta. We report two adult cases of systemic arterialization of normal basal segments of left lower lobe lung with/without sequestration. The one (AOLPA) was treated by left lower basal segmentectomy and the other (Sequestration) by therapeutic angiographic embolization. Based on the favorable follow-up result in our patients, although lobectomy (segmentectomy) is the basic treatment modality, embolotherapy could also be a mode of treatment that could be selectively applied to elderly, infirm patients or high risk patients with poor pulmonary function.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.238-238
• /
• 2016

백색 발광다이오드(LED)는 기존 조명(백열등, 형광등)에 비하여 월등히 에너지를 절약할 수 있어 이미 상업적, 정책적으로 교체가 진행 중이다. 현재의 백색 LED를 만들기 위해서는 필연적으로 형광체를 사용해야 한다. 그러나 이 형광체에 의한 (a)Stocks 에너지변환에 의한 효율감소, (b)높은 공정비용, (c) 열적 안정성 저하를 피할 수 없다. 우리는 유기금속화학증착(MOCVD)과 선택적성장(selective-area epitaxial growth)방법을 이용하여 형광체를 쓰지 않고 3차원 구조체를 이용하여 백색 LED를 제작하여 전기구동하였고 전류의 세기를 변화하여도 지속적으로 동일한 백색광을 유지함을 보였다. 광학적 분석(cathodoluminescence)과 구조적 분석(scanning electron microscope, transmission electron microscope)을 진행하여 구조를 살피고 백색 발광의 원인을 분석하였다. 또한, 고배율 대물렌즈를 사용한 공간분해 광학적 분석실험(photoluminescence와 electroluminescence 데이터를 비교)으로부터 국소적 운반자의 주입효율을 분석하는 방법을 고안하여 실험하였다.[1] 향후 이 방법은 3차원 구조체 LED뿐 아니라 2차원 LED에도 응용하여 LED의 주입효율을 분석하는데 유용하게 사용될 수 있을 것이라 기대된다.

• 한국항공운항학회:학술대회논문집
• /
• 2016.05a
• /
• pp.5-8
• /
• 2016

본 연구에서는 다양한 급의 항공기를 단일 플랫폼에서 모의할 수 있는 시뮬레이터를 개발하기 위해 표준 비행역학 모의모델의 구조 및 인터페이스를 설계하였다. 비행역학 모의모델은 다양한 급의 항공기를 모의하기 위해 공통적으로 적용할 수 있는 비행동역학 모델과 환경모델은 항공기 기종에 관계없이 동일하게 설계하였고, 엔진, 구동기, 비행제어, 랜딩기어 모델과 같이 항공기 기종에 따라 차이가 있는 모델은 사용자가 선택하여 사용할 수 있도록 설계하였다. 또한 복잡한 구조의 소프트웨어를 사용자가 쉽게 접근하여 수정/모의할 수 있도록 비행역학 모의모델의 입력파일을 텍스트 기반인 XML 형식으로 설계하였다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.5
• /
• pp.88-92
• /
• 2006

Proto Flight Model of Reaction Wheel Assembly Interface Unit(RIU) for STSAT-2 was developed. The RIU of STSAT2 has three major functions for interface between satellite system and RWAs. It has switches for RWA main power, communication Mux. and communication line driver.

• Proceedings of the KIPE Conference
• /
• 2004.07a
• /
• pp.61-63
• /
• 2004

Focus Electrode(FE) 기능을 갖는 진행파관 증폭기(TWTA)를 구동하기 위하여 고전압 펄스전원 장치가 필요하다. 이 전원장치는 영부터 -5.0 kV TWT 캐소드 고전압 위에서 펄스 출력으로 동작 되어야 한다. 고전압펄스전원장치는 바이어스 전압이 영부터 -1.5 kV 사이를 연속적으로 가변 할 수 있어야 하고, 펄스의 반복 주파수는 CW로 부터 1 kHz 그리고 펄스폭은 $10\;{\mu}s$ 부터 $500\;{\mu}s$로 선택 가능하여야 한다. 그리고 출력펄스의 상승 및 하강 시간은 150 ns 보다 작아야 한다. 턴-온 및 오프의 스윗칭 시간을 만족시키기 위하여 고전압 스위치는 직렬로 연결된 FET 모듈을 사용하였다. 본 논문에서는 이러한 고전압 펄스전원장치의 설계 및 제작원리 그리고 시험결과에 대하여 다루었다.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.3 no.1
• /
• pp.55-64
• /
• 1999

Large size shipyards have peformed the generating of piece and the nesting using shipbuilding-oriented CAD program, which requires higher skilled operators and lots of costs. So, medium and small size shipyards have pursued different types of piece generation and nesting (arrangement method). This research is to develop a program for the generating of pieces with parametric macro method and a STRIP program for the nesting of pieces by PC, which can be applied in such shipyards.