• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.17 no.6
• /
• pp.211-223
• /
• 2018

Mobile relay systems have been adopted by $4^{th}$ generation mobile systems as an alternative method to extend cell coverage as well as to enhance the system throughput at cell-edges. In order to achieve such performance gains, the mobile relay systems require path selection and resource allocation schemes that are specifically designed for these systems which make use of additional radio resources not needed in single-hop systems. This paper proposes an integrated path selection and resource allocation scheme for LTE-Advanced relay systems using collaborative communication. We first define the problem of maximizing the downlink throughput of LTE-Advanced relay systems using collaborative communication and transform it into a multi-dimensional multi-choice backpacking problem. The proposed Lagrange multiplier-based heuristic algorithm is then applied to derive the approximate solution to the maximization problem. It is shown through simulations that the approximate solution obtained by the proposed scheme can achieve a near-optimal performance.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.9
• /
• pp.1340-1346
• /
• 2022

In this paper, we consider a downlink non-orthogonal multiple access (NOMA) using multiple transmit antennas, where the transmit antenna selection scheme is used to reduce the system complexity. Thus, in this paper, we propose radio resource allocation and receiver selection schemes in order to improve the outage probability performance of the downlink NOMA system using the transmit antenna selection scheme. In particular, the receiver selection scheme is a method of grouping the receivers to improve the outage probability performance, and the radio resource allocation scheme is a method of allocating radio resources to each group in order to enhance the outage probability performance. In addition, through the computer simulation under the assumption of independent Rayleigh fading channels, we show that the proposed radio resource allocation and receiver selection schemes can improve the outage probability performance at the expense of the sum rate performance.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2023.05a
• /
• pp.280-281
• /
• 2023

Wireless communication in marine environments requires a significant amount of power for long-range communication, resulting in high energy consumption. Moreover, the numerous constraints in marine environments make it difficult to apply existing wireless communication technologies, necessitating the development of new technologies to address these issues. This paper investigates beam selection technology for marine environments, which reduces overall power consumption and minimizes interference between signals by selecting and transmitting necessary beams for communication in a specific area, enabling better quality communication. We validate the energy efficiency of the beam selection technology through simulations and compare it with existing wireless communication technologies. The results show that beam selection technology consumes less power and provides better communication quality than existing wireless communication technologies. Therefore, beam selection technology plays a critical role in establishing efficient communication systems in marine environments, and its application can improve communication quality over a broader area.

• The Journal of the Korea Contents Association
• /
• v.20 no.11
• /
• pp.301-313
• /
• 2020

This study is a study on the interlocking method between emergency preparedness simulation model and military exercise war game model. The national emergency preparedness government exercises are being carried out by a message exercise and technology development for simulation models is being carried out to create a situation similar to the actual practice. In order to create a situation similar to the actual war, the military situation must be reflected and to do so, a link with the military exercise war game model is needed. The military exercise war game model applies HLA/RTI, which is a standardized interlocking method for various models such as Taegeuk JOS, and it is necessary to apply HLA/RTI linkage method to link with these military exercise war game models. In addition, since the emergency preparedness simulation model requires limited information such as enemy location and enemy attack situation on major facilities in the military exercise model, a method of interlocking that can select and link information is required. Therefore, in this study, the interlocking interface design plan is presented in order to selectively link the interlocking method and information between the emergency preparedness simulation model and the military exercise war game model. The main functions of interlocking interface include federation synchronization, storage and recovery, object management service, time management, and data filtering functions.

• The Korean Journal of Nuclear Medicine
• /
• v.38 no.1
• /
• pp.74-84
• /
• 2004

Purpose: Since I-125 emits low energy (27-35 keV) radiation, thinner crystal and collimator could be employed and, hence, it is favorable to obtain high quality images. The purpose of this study was to derive the optimized parameters of I-125 SPECT using a new simulation tool, GATE (Geant4 Application for Tomographic Emission). Materials and Methods: To validate the simulation method, gamma camera developed by Weisenberger et al. was modeled. Nal(T1) plate crystal was used and its thickness was determined by calculating detection efficiency. Spatial resolution and sensitivity curves were estimated by changing variable parameters for parallel-hole and pinhole collimator. Peformances of I-125 SPECT equipped with the optimal collimator were also estimated. Results: in the validation study, simulations were found to agree well with experimental measurements in spatial resolution (4%) and sensitivity (3%). In order to acquire 98% gamma ray detection efficiency, Nal(T1) thickness was determined to be 1 mm. Hole diameter (mm), length (mm) and shape were chosen to be 0.2:5:square and 0.5:10:hexagonal for high resolution (HR) and general purpose (GP) parallel-hole collimator, respectively. Hole diameter, channel height and acceptance angle of pinhole (PH) collimator were determined to be 0.25 mm, 0.1 mm and 90 degree. The spatial resolutions of reconstructed image of the I-125 SPECT employing HR:GP:PH were 1.2:1.7:0.8 mm. The sensitivities of HR:GP:PH were 39.7:71.9:5.5 cps/MBq. Conclusion: The optimal crystal and collimator parameters for I-125 Imaging were derived by simulation using GATE. The results indicate that excellent resolution and sensitivity imaging is feasible using I-125 SPECT.

• Journal of the Korea Society for Simulation
• /
• v.17 no.1
• /
• pp.33-42
• /
• 2008

In general, simulation is to predict or evaluate some systems that are hard to be executed in real world, and so usually the target systems to be modeled are large and complex. Trying to observe the dynamics of the systems results in similar level of animation complexity, the model and animation has the same complexity as the system. Trying to display all the graphic objects representing the dynamics of the models being simulated, however, causes the distraction of focus, which results in solving the above listed problems difficult. The redundant graphic objects also increase the computer computation overhead. To solve the problem, a research about a hierarchical animation environment has been proposed a few years ago. In the research, the users can have better focus on the dynamics of system components by selectively choosing the hierarchical level and components within a level of the hierarchically structured model. However, the research has not a modeling methodology for modelers to describe systematically animation part corresponding to dynamics of simulation in a model. This research has defined the modeling methodology of DESHA and defined DESHA-C++, improving the previous research output, as an execution environment of DESHA models. In addition, to use hierarchical animation environment in various problems, this research proposed and developed the distributed simulation modeling environment that connects DESHA environment and HLA.

• Journal of the Korea Society for Simulation
• /
• v.29 no.1
• /
• pp.11-21
• /
• 2020

Cardio-cerebrovascular diseases (CCD) account for 24% of the causes of death to Koreans and its proportion is the highest except cancer. Currently, the risk of the cardiovascular disease for domestic patients is based on the Framingham risk score (FRS), but accuracy tends to decrease because it is a foreign guideline. Also, it can't score the risk of cerebrovascular disease. CCD is hard to predict, because it is difficult to analyze the features of early symptoms for prevention. Therefore, proper prediction method for Koreans is needed. The purpose of this paper is validating IG-MLP (Information Gain - Multilayer Perceptron) evaluation based feature selection method using CCD data with simulation. The proposed method uses the raw data of the 4^th ~ 7^th of The Korea National Health and Nutrition Examination Survey (KNHANES). To select the important feature of CCD, analysis on the attributes using IG-MLP are processed, finally CCD prediction ANN model using optimize feature set is provided. Proposed method can find important features of CCD prediction of Koreans, and ANN model could predict more accurate CCD for Koreans.

• Journal of the Korea Society for Simulation
• /
• v.20 no.4
• /
• pp.31-40
• /
• 2011

Sensor nodes are easily exposed to malicious attackers by physical attacks. The attacker can generate various attacks using compromised nodes in a sensor network. The false report generating application layers injects the network by the compromised node. If a base station has the injected false report, a false alarm also occurs and unnecessary energy of the node is used. In order to defend the attack, a statistical en-route filtering method is proposed to filter the false report that goes to the base station as soon as possible. A path renewal method, which improves the method, is proposed to maintain a detection ability of the statistical en-route filtering method and to consume balanced energy of the node. In this paper, we proposed the secure path cycle method to consume effective energy for a path renewal. To select the secure path cycle, the base station determines through hop counts and the quantity of report transmission by an evaluation function. In addition, three methods, which are statistical en-route filter, path selection method, and path renewal method, are evaluated with our proposed method for efficient energy use. Therefore, the proposed method keeps the secure path and makes the efficiency of energy consumption high.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2009.04a
• /
• pp.264-270
• /
• 2009

선진국 국립연구소에서만 개발하여 적용중인 hydrocode 또는 wavecode를 최근에 국내에서 C++언어로 ExLO를 개발하였다. 3차원 FEM을 적용한 본 코드의 가장 두드러진 특징은 Lagrangian/ALE/Eulerian solver 들을 모두 한 프레임에 내포하고 있어 적용범위에 따라 즉 변형양상에 따라 선택적인 해석 solver의 적용이 가능하다는 것이다. 즉 문제에 따른 (변형의 양상에 따른) 최적의 시뮬레이션 해석 solver 적용할 수 있다. 본 논문에서는 ExLO를 이용하여 고속 물체의 충돌, 파편의 구조물 관통해석 및 대기 중 Air-blast 충격파 전파해석, 물속에서의 수중폭발 충격파 생성 및 전파해석 등의 예제를 소개하고 그 신뢰성을 확인해 보고자 한다. 대체로 군사적인 적용이 많으나 차츰 민간분야의 다양한 방재현상 시뮬레이션에 적용이 가능할 것이다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.129-129
• /
• 2015

Dry etcher, PECVD등의 플라즈마 공정 장비의 구조물에는 유전체로 절연된 금속판들이 사용된다. 플라즈마 이론을 보면 이들 표면의 전위는 양전하 플럭스와 음전하 플럭스가 같아서 순전류가 0이 되는 부유 전위를 갖는다. 금속과 같은 전도체의 표면은 모두 같은 전위를 가져야 한다. 일반적인 플라즈마 시뮬레이션 소프트웨어에는 이런 경계 조건이 선택 가능하지 않다. ESI사의 CFD-ACE+의 사용자 루틴 개발 기능을 이용하여 Fortran90문법으로 경계면 최인접 셀의 중심에서 구한 전자 온도와 경계면의 이온 입사 플럭스로 가중평균을 구한 이온 질량을 맥스웰분포를 가정한 부유 전위식에 대입하여 시뮬레이션을 CCP에서 구현하였다. 원형 챔버의 가장자리에 떠 있는 사각 링 전극을 가정하고 이 전극 표면이 접지 전위일때, 유전체 일때, 본 연구에서 개발한 루틴을 적용한 결과를 Ar CCP에 대해서 비교 분석하였다.