• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.38 no.4
• /
• pp.38-38
• /
• 2001

본 논문에서는 웨이브릿 영역에서의 영역 분류와 대역간 예측 및 선택적 벡터 양자화를 이용한 다분광 화상테이타 압축 기법을 제안하였다. 이 방법에서는 각 대역을 웨이브릿 변환 후, 각 대역의 기저밴드의 대역별 특성을 이용하여 영역 분류를 행하였다. 그리고, 다른 대역과 해상도가 동일하고 공간적 분산이 작으며 분광적 상관성이 큰 기준대역 (reference channel)을 결정한 뒤, 이를 영역별 스칼라 및 분류별 가변 벡터 양자화를 행하여 부호화 하였다. 또한 기준대역과의 대역간 상관성이 큰 대역들에 대해서는 영역별 대역간 예측을 행한 후, 활동도가 높은 블록에 대해서만 선택적 벡터 양자화로 부호화를 행하였다. 이때, 활동도가 높은 블록들의 위치정보는 기준대역으로부터 얻어지는 임계치 지도 (threshold map; THMAP)를 이용하였다. 즉, 제안한 방법에서는 각 대역에 대해 웨이브릿 영역에서의 영역 분류 후 영역별 대역간 예측을 행함으로써 다분광 화상데이타에 존재하는 대역간 중복성을 제거하고 선택적 벡터 양자화를 행함으로써 대역내 중복성을 효과적으로 제거하여 압축효율을 향상시킨다. 실제 원격 센싱된 인공위성 화상데이타에 대한 실험을 통하여 제안한 기법의 부호화 효율이 기존의 기법에 비하여 우수함을 확인하였다.

• Korean Journal of Soil Science and Fertilizer
• /
• v.41 no.6
• /
• pp.369-373
• /
• 2008

Special concern has been given to the elevated arsenic content in soils because of its high mobility and toxicity. Layered double hydroxide (LDH) which has a high anionic exchange capacity is another potential anion adsorbent for toxic anions such as arsenic, chromate and selenium etc. The uptake of arsenate from aqueous solutions by the calcined Mg-Al LDH has been investigated. The sorption capacity was about 530 mmol/kg. Sorption isotherm was defined as L-type in which arsenate was removed by LDH through anion uptake reaction. Arsenate sorption by the calcined Mg-Al LDH was occurred by reconstruction of LDH's framework. Competitive adsorption revealed that Mg-Al LDH had higher selectivity for arsenate than for sulfate. These results strongly suggest that calcined Mg-Al LDH has a promising potential for efficient removal of toxic metal oxides like arsenates from aqueous environments.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.1400-1404
• /
• 2006

생물학적 질소, 인 제거 공정(이하 BNR)의 운전에 있어서 최적 유입수의 C/N(COD/TKN)비, SRT 및 온도의 범위 및 정량적 수치 등은 유기물 뿐 만아니라 질소, 인의 처리 효율에 있어서 매우 중요하다. 특히, 외국과 다른 저농도 유기물 특성을 보이는 국내 하수에 대해서는 BNR 공정의 선택과 설계 및 운전인자의 선별이 무엇보다도 중요한 역할을 한다. 본 연구에서는 IAWQ에서 제시한 ASM No.2d를 기초로 하여 만들어진 전산모형인 Envirosim사의 Biowin 프로그램을 시뮬레이션 도구로 활용하여, 국내 하수에 비교적 적용하기 용이한 A2/O 공정과 MUCT 공정에 대한 유기물, 질소 및 인처리 효율을 비교하고 유입수의 C/N와 SRT 및 온도에 따른 질소, 인 처리 특성과 유출수의 거동 등을 파악하였다. 시뮬레이션 결과, 국내 하수에서는 A2/O 보다는 MUCT 공정이 질소, 인 처리효율이 더 크게 나타났다. 온도와 SRT가 일정한 상태에서 C/N비는 7이상에서 TKN과 TP제거효율이 양호하게 나타났고, 온도와 C/N비를 일정한 조건에서는 SRT가 7일을 넘어서면 효율이 급격히 낮아지는 현상을 관찰할 수 있었다. 온도조건 실험에서는 $20^{\circ}C$이하, 특히 국내 하수처리장에 BNR 적용시 설게조건인 $13^{\circ}C$에 근접해서는 TKN의 제거효율은 급격히 떨어지는 반면에 인 제거효율이 상승하는 것으로 나타났다.

• Korean Chemical Engineering Research
• /
• v.53 no.4
• /
• pp.457-462
• /
• 2015

Hemicellulosic hydrolysates contain not only sugars but also several kinds of ethanol fermentation inhibitory substances such as carboxylic acids, furans and phenolic compounds. In this work, emulsion liquid membrane (ELM) was chosen as a separation technology to remove the inhibitors. A basic simulated hemicellulosic hydrolysate was composed of xylose as sugar, dilute sulfuric acid solution as solvent, and acetic acid as carboxylic acid, and furfural as furan derivative or p-hydroxybenzoic acid(HBA) as phenolic compound was added to the hydrolysate when necessary. Acetic acid and HBA as weak acid could be selectively removed from the hydrolysates in all the ELM systems considered here, but furfural as aldehyde was quite hard to remove. Also, when HBA was added to the basic simulated hemicellulosic hydrolysate, both of acetic acid and HBA in the feed phase could be selectively removed up to 99% in an ELM system with tributyl phosphate as extractant.

• Journal of the Mineralogical Society of Korea
• /
• v.23 no.2
• /
• pp.107-115
• /
• 2010

Removal and mineralization of dissolved uranium by bacteria in KURT (KAERI Underground Research Tunnel), Korea Atomic Energy Research Institute (KAERI) was investigated. Two different bacteria, IRB (iron-reducing bacteria) and SRB (sulfate-reducing bacteria) was used, and minerals formed by these bacteria were characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM). Compared to uranyl ions, ferric ions were preferentially reduced by IRB, showing that there is no significant reduction and removal of uranium. However, uranium concentration considerably decreased by addition of Mn(II). Results show that a sulfide mineral such as mackinawite (FeS) is formed by SRB respiration through combination of Fe(II) and S without manganese sulfide formation. In the presence of Mn(II), however, uranium is removed effectively, suggesting that the sorption and incorporation of uranium could be affected by Mn(II) onto the sulide minerals.

• The korean journal of orthodontics
• /
• v.37 no.6
• /
• pp.400-406
• /
• 2007

The purpose of this experimental study was to evaluate the effect of immediate orthodontic loading on the stability at the bone-implant interface of titanium miniscrews in a rabbit model. Methods: Forty titanium miniscrews (1.6 mm diameter, 8 mm length) were inserted in the tibiae of 10 rabbits. Twenty test group miniscrews were subjected to continuous orthodontic forces of 200g immediately after implantation for a period of 6 weeks. The remaining 20 control group miniscrews were left unloaded for the same follow-up interval. Removal torque values were recorded using a digital torque gauge. An independent t-test was performed. Results: All the miniscrews were stable, and exhibited no mobility or displacement throughout the experimental period. Histologically, miniscrews were well-integrated into bone. No statistically significant differences in removal torque data were found between the loaded test and the unloaded control groups. Conclusions: These findings suggest that titanium miniscrews can be used as anchoring units for orthodontic tooth movement immediately after insertion.

• Clean Technology
• /
• v.23 no.4
• /
• pp.357-363
• /
• 2017

In this study, the supercritical carbon dioxide ($scCO_2$)/ n-butyl acetate (n-BA) co-solvent system was employed to remove an unexposed negative photoresist (PR) from the surface of a silicon wafer. In addition, the selectivity of the $scCO_2$/n-BA co-solvent system was confirmed for the unexposed and exposed negative PR. Optimum conditions for removal of the unexposed PR were obtained from various conditions such as pressure, temperature and n-BA ratio. The n-BA was highly soluble in $scCO_2$ without cloud point and phase separation in mostly experimental conditions. However, the $scCO_2$/n-BA co-solvent was phase separated at 100 bar, above $80^{\circ}C$. The unexposed and exposed PR was swelled in $scCO_2$ solvent at all experimental conditions. The complete removal of unexposed PR was achieved from the reaction condition of 160 bar, 10 min, $40^{\circ}C$ and 75 wt% n-BA in $scCO_2$, as measured by ellipsometry. The exposed photoresist showed high stability in the $scCO_2$/n-BA co-solvent system, which indicated that the $scCO_2$/n-BA co-solvent system has high selectivity for the PR removal in photo lithograph process. The $scCO_2$/n-BA co-solvent system not only prevent swelling of exposed PR, but also provide efficient and powful performance to removal unexposed PR.

• 순환기질환의공학회:학술대회논문집
• /
• 2002.11a
• /
• pp.31-32
• /
• 2002

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2004.11a
• /
• pp.107-109
• /
• 2004

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1997.10a
• /
• pp.105-105
• /
• 1997