• 제목/요약/키워드: 선열원

검색결과 10건 처리시간 0.034초

자유 열상승류 중앙에 놓인 수직평판에 관한 자연대류 (Natural Convection about a Vertical Flat Plate Immersed in a Thermal Plume)

  • ;하만영
    • 대한기계학회논문집
    • /
    • 제10권5호
    • /
    • pp.798-805
    • /
    • 1986
  • 단열 혹은 등온 경계조건 하의 수직평판과, 선열원으로부터 형성되는 열상승류 간의 열적 상호작용을 조사형ㅆ다. 경계층 방정식은 Patankar-Spalding의 유한차분법을 사용하여 계산하였다. 단열평판의 경우에 자유 열상승류로부터 벽 경계층으로 부터의 점진적인 발달 단계를 설명하였다. 등온평판의 경우에는 평판주위에 새롭게 형성되는 열경계층에서의 열전달현상을 자세히 고찰하였다.

적외선열화상을 이용한 원자력발전소 감육 배관의 결함 검출 (Defect Detection of the Wall Thinning Pipe of the Nuclear Power Plant Using Infrared Thermography)

  • 김경석;장호섭;홍동표;박찬주;나성원;김경수;정현철
    • 비파괴검사학회지
    • /
    • 제30권2호
    • /
    • pp.85-90
    • /
    • 2010
  • 절대온도(OK) 이상의 온도를 가지고 물체는 표면온도에 대응하는 적외선 파장대역에서 적외선 에너지를 방출하게 된다. 적외선열화상은 적외선 파장대역에 반응하는 검출기를 이용하여 검출된 적외선 량을 온도로 변환하고 사용자에게 적외선영상을 실시간으로 제공하는 비파괴검사 방법이다 원자력발전소의 배관은 부식, 피로 등으로 인해 두께가 얇아져 큰 사고로 이어질 수 있는 결함이 발생하므로 이를 위한 효율적인 비파괴검사 시스템이 요구되고 있다. 따라서 본 연구에서는 적외선열화상 카메라로 측정한 온도와 배관의 결함 깊이 및 크기와의 상관관계를 알아보고 이를 원자력발전소 배관에 적용하여 결함을 검출하는 연구를 수행하였다.

박판의 이중 빔 레이저 용접에서 열유동 해석에 관한 연구 (A Study on Thermal Analysis of Dual Beam Laser Welding of Thin Metal Sheet)

  • 김재웅
    • Journal of Welding and Joining
    • /
    • 제15권4호
    • /
    • pp.99-108
    • /
    • 1997
  • Analytical model for the temperature distribution and the cooling rate of weld in dual beam laser welding is presented for investigating the possibility of controling the cooling rate. The model is based on the solutions to the problem of heat flow due to the distributed and line heat sources for preheating and welding respectively in plates with finite thickness. The effects of beam power, beam distribution parameter, interbeam distance, and welding speed on the resulting temperature distribution and cooling rate are presented. The cooling rates of dual beam laser weld at the weld centerline under the investigated conditions are reduced to as one third of those of welds which were produced by single beam laser. And it appeared that the cooling rate of dual beam laser weld is strongly dependent on the process parameters of preheating laser beam power and welding speed.

  • PDF

전단간섭계와 적외선열화상을 이용한 감육 직관의 결함검출 (Defect Detection of Wall Thinned Straight Pipe using Shearography and Lock-in Infrared Thermography)

  • 김경석;정현철;장호섭;김하식;나성원
    • 한국정밀공학회지
    • /
    • 제26권11호
    • /
    • pp.55-61
    • /
    • 2009
  • The wall thinning defect of nuclear power pipe is mainly occurred by the affect of the flow accelerated corrosion (FAC) of fluid. This type of defect becomes the cause of damage or destruction of in carbon steel pipes. Therefore, it is very important to measure defect which is existed not only on the welding part but also on the whole field of pipe. This study use dual-beam Shearography, which can measure the out-of-plane deformation and the in-plane deformation by using another illuminated laser beam and simple image processing technique. And this study proposes Infrared thermography, which is a two-dimensional non-contact nondestructive evaluation that can detect internal defects from the thermal distribution by the inspection of infrared light radiated from the object surface. In this paper, defect of nuclear power pipe were, measured using dual-beam shearography and infrared thermography, quantitatively evaluated by the analysis of phase map and thermal image pattern.

적외선열화상 이미지법과 패턴 인식을 이용한 철도차량 회전기기의 비파괴 진단 (Non-Destructive Diagnosis of Rotational Components of a Railway Vehicle Using Infrared Thermography and Pattern Recognitions)

  • 권석진;김민수;서정원;강부병
    • 비파괴검사학회지
    • /
    • 제36권4호
    • /
    • pp.300-307
    • /
    • 2016
  • 차량 부품의 고장은 운용 중단과 탈선 결과로 나타날 수 있으며 차량 주요부품의 이상상태를 진단하는 것은 중요하다. 온도를 이용한 진단 방법은 철도차량 회전기기의 -예를 들면, 베어링, 감속기, 견인전동기, 디스크- 비정상 상태를 진단하는 기본적인 방법이다. 본 연구에서는 적외선열화상과 패턴 이미지법을 이용하여 차량 하부의 회전기기의 이상 진단시스템을 구축하여 현장시험을 수행하였다. 그 이상상태 진단시스템은 차량 하부 회전기기의 이상발열 상태를 진단할 수 있었으며 비정상 상태를 평가할 수 있었다.

Bi가 다량 치환된 가네트 박막을 이용한 1차원 자성 포토닉 결정의 자기광학 특성의 시뮬레이션 (Simulation of Magneto-optic characteristic of One Dimensional Magneto-Photonic Crystal with an Active Layer of a Highly Bi-Substituted Iron Garnet)

  • 류선열;박재혁;이종백;조재경
    • 한국광학회:학술대회논문집
    • /
    • 한국광학회 2000년도 하계학술발표회
    • /
    • pp.184-185
    • /
    • 2000
  • 1 차원 자성 포토닉 결정은 원하는 파장에서 큰 페러데이 회전각과 투과율을 얻을 수 있기에 아주 흥미롭다. 두 종류의 유전체 층(S: $SiO_2$, T:T $a_2$ $O_{5}$)을 주기적으로 적층한 구조에, Bi를 다량 치환한 가네트 박막(M:B $i_{1.07}$ $Y_{1.93}$F $e_{5}$ $O_{12}$)을 결함층으로 삽입한 (A/B)$_{k}$ M/(B/A)$_{k}$ 의 구조를 갖는 1차원 자성 포토닉 결정의 자기 광학 특성을 수치해석하였다. 가시광과 적외선 영역에서 1차원 자성 포토닉 결정의 자성체 층의 두께( $d_{M}$ )와 유전체 층의 적층수(k)를 변화시키며, 투과율(T)과 페러데이 회전각($ heta$$_{F}$ ) 및 성능지수(Q)를 조사하였다. (중략). (중략)(중략)

  • PDF

스트레인 게이지를 이용한 암석의 열팽창계수 측정 (Measurement of Thermal Expansion Coefficient of Rock using Strain Gauge)

  • 박찬;김형목;신중호;박연준;천대성
    • 터널과지하공간
    • /
    • 제17권6호
    • /
    • pp.475-483
    • /
    • 2007
  • 에너지원으로서 LNG 수요뿐 아니라 온실가스인 이산화탄소의 처분에 대한 필요성이 점차 증가되고 있어, 이를 위한 많은 저장시설이 요구된다. 이러한 저장시설은 안전성과 국토의 효율적 이용 등으로 인하여 지하화하는 경향이 있다. 이와 같은 온도특성을 고려해야하는 물질에 대한 지하저장시설의 건설에 있어서, 암석의 열물성은 열역학적 특성과 함께 저장시설의 설계 및 유지관리를 위한 중요한 요소이다. 본 연구에서는 암석입자의 크기와 실험온도범위를 고려하여 스트레인 게이지를 이용하여 암석의 열팽창계수를 실험적으로 측정하였다. 실험결과 열팽창계수는 온도가 내려감에 따라 감소하였으며, 국내 대표암석인 화강암에 대한 선열팽창계수의 온도관계식을 제안할 수 있었다. 본 연구에서 수행된 온도변화에 따른 시험결과는 지하저장소의 열역학적 안정성 해석과 열전파 특성을 규명하기 위한 해석에 주요 자료로 활용될 수 있을 것이다.