• 청정기술
• /
• 제12권3호
• /
• pp.182-189
• /
• 2006

본 연구에서는 생산성 향상을 위하여 적용 분야가 점차로 확대되고 있는 고속 절삭가공의 경제성 및 환경비용을 평가하였다. 가공시간 및 가공비용이라는 절삭공정의 경제성 평가 모델과 더불어 수학적으로 모델링 된 절삭유제의 손실량 및 폐 유제 처리비용을 이용하여 환경비용을 고려한 절삭공정의 생산비용을 분석하였다. 분석에는 CBN 볼 엔드밀을 사용한 고속가공과 여러가지 냉각방식을 적용한 고속 선삭가공 공종에 대한 공수수명 및 공구마모 실험 데이터를 이용하였다. 고속 밀링가공에서 절삭속도가 높을수록 생산비용은 작아져서 고속가공의 장점을 그래도 보여주었다. 압축공기, 냉풍, 수용성 절삭유제, 건식 절삭의 네 가지 냉각방법을 사용한 선삭가공의 분석에서는 절삭유제를 이용한 냉각방식이 절삭유제를 사용하지 않은 방식에 비하여 공수수명의 향상으로 생산비용이 작았으나 환경비용을 고려하면 냉풍을 이용한 냉각방식이 생산성과 환경영향의 모든 면에서 가장 우수하였다.

• 대한산업공학회지
• /
• 제18권1호
• /
• pp.155-167
• /
• 1992

This paper presents an automatic setup planning system for turning operation of symmetric rotational parts. The proposed setup planning system determines workpiece holding method, number of setup, clamping surface, and workpiece holding device by using design data, part description database and part feature recognition information. The workpiece holding method is based on functional name and length/diameter ratio of the given part, and number of setup is determined by part profile type and its technological constraints. Clamping surface and workpiece holding device are determined by using information about the results of workpiece holding method and number of setup, and capacity of workpiece holding devices. A case study is performed to show the performance of the proposed system.

• 천문학회보
• /
• 제41권2호
• /
• pp.65.1-65.1
• /
• 2016

일반적으로 천체 망원경에 사용되는 반사경은 유리 소재로 제작된다. 그러나 알루미늄을 반사경 소재로 사용하면 광기계구조물과 반사경의 열팽창계수가 유사하여 치수 안정성이 높다는 장점이 있다. 뿐만 아니라 다이아몬드 선삭 기계 (Diamond Turning Machine, DTM)를 이용할 수 있기 때문에 반사경의 가공 시간 및 제작 비용을 절감할 수 있다. 본 연구에서는 알루미늄 합금 (Al6061-T6)을 소재로 구경 150 mm, 초점거리 600 mm인 포물면 반사경을 제작하였다. 우선 DTM을 이용해 알루미늄을 가공하였는데, 이 때 표면 조도와 관련된 고주파 오차 (High Frequency Error, HFE)가 발생한다. 따라서 표면 조도를 향상시키기 위한 추가적인 공정으로써 가공된 표면을 도금한 후 열처리를 하고, 폴리싱과 이중 코팅을 거쳐서 최종 반사경을 얻었다. 각 단계별 공정을 마친 후에는 접촉식 및 광학식 형상 측정 방법으로 표면 측정을 실시하여 이를 분석하였다. 본 발표에서는 각 공정 단계에서의 반사경 표면 분석 결과를 설명할 것이며, 제작된 알루미늄 반사경과 기존의 유리 소재의 반사경을 성능 면에서 비교할 것이다.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2005년도 춘계학술대회 논문집
• /
• pp.462-467
• /
• 2005

This paper presents virtual machining system in order to realize turning process in virtual space. A reliable virtual turning process simulation was developed based on the surface shaping system which is capable of considering geometric model, thermal error model, and vibration model. Accuracy of surface shape resulting from proposed machining simulator was verified experimentally. This paper also developed the watchdog agent that continuously assessed, diagnosed, and predicted performance of products and machines in machining. The Watchdog agent extracted feature signal using time-frequency analysis among various signals from multi-sensor and evaluated machining condition using performance confidence value.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.1063-1066
• /
• 2002

The wavelet transform is a popular tool for studying intermittent and localized phenomena in signals. In this study the wavelet transform of cutting force signals was conducted for the detection of a tool failure in turning process. We used the Daubechies wavelet analyzing function to detect a sudden change in cutting signal level. A preliminary stepped workpiece which had intentionally a hard condition was cut by the inserted cermet tool and a tool dynamometer obtained cutting force signals. From the results of the wavelet transform, the obtained signals were divided into approximation terms and detailed terms. At tool failure, the approximation signals were suddenly increased and the detailed signals were extremely oscillated just before tool failure.

• 한국정밀공학회지
• /
• 제17권12호
• /
• pp.54-60
• /
• 2000

Research about tool condition monitoring has been done until now for product automation and unmaned system. But it is hard to apply it to the industrial field due to its cost and reliability. This paper presents the new method of tool wear measurement using Marpos gauge. This is a kind of touch sensor, so its cost is lower than vision system. And it is not affected by dust and illumination, which are important in vision system. This proposed method use tool clearance angle to measure flank wear. Experimental results compared with vision system shows that this method is available for tool condition monitoring system.

• 한국정밀공학회지
• /
• 제17권12호
• /
• pp.94-100
• /
• 2000

This paper presents a methodology for In-Process monitoring of tool wear by using ultrasonic sensor in turning operation. An integrated single ultrasonic transducer operation at a frequency of 10MHz is placed in contact with the insert tip. The change in amount of the reflected energy from the nose and flank of the tool can be related to the level of tool wear and the mechanical integrity of the tool. As the results, the tool wear monitoring system based on the ultrasonic pulse-echo method was proposed, it is useful to determine a tool life and tool change time.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 춘계학술대회 논문집
• /
• pp.269-273
• /
• 1997

In order to maker unmanned machining systems with satisfactory performances, it is necessary to incorporate appropriate condition monitoring systems in the machining workstations to provide the required intelligence of the expert. This paper deals with condition monitoring for chatter, tool wear and fracture during turning operation. To develop economic sensing and identification methods for turning processes, sound pressure measurement and digital signal processing technique were proposed. We suppressed chatter by stability control methodology, which was studied through manipulation of spindle speeds regarding to chatter frequencies. It was shown that tool wear and fracture were identified and to be estimated by using the wear indices. The validity of the proposed system was confirmed through the large number of cutting tests.

• 한국정밀공학회지
• /
• 제19권12호
• /
• pp.78-85
• /
• 2002

The wavelet transform is a popular tool fer studying intermittent and localized phenomena in signals. In this study the wavelet transform of cutting force signals was conducted for the detection of a tool failure in turning process. We used the Daubechies wavelet analyzing function to detect a sudden change in cutting signal level. A preliminary stepped workpiece which had intentionally a hard condition was cut by the inserted cermet tool and a tool dynamometer obtained cutting force signals. From the results of the wavelet transform, the obtained signals were divided into approximation terms and detailed terms. At tool failure, the approximation signals were suddenly increased and the detailed signals were extremely oscillated just before tool failure.

• 한국정밀공학회지
• /
• 제9권3호
• /
• pp.53-60
• /
• 1992

This paper deals with developing an Expert system for tool selection using knowledge base system approach, and its application. For the sake of building of knowledge base, the information from process through sensor, tool handbook and interview with expert are referrenced and managed. The system developed shows good application flexibility in providing the actual cutting process with the selection of tool(insert, holder) and cutting conditions(feed, speed, rake type, and so on), is found as a useful system for real-time machining process. The Expert system for tool selection is written in TURBO PROLOG ver. 2.0 for inference engine capability, and can be run in interactive mode for user friendliness. In order to apply the system developed in actual cutting process, more parameters should be considered and scrutinized, and the system should be further extended in modular basis.