• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.496-500
• /
• 2001

When we cut a key way on the axial or on the boss, we generally use a slotter or a broach. To do the key seating, turing operations have to be preceded and then the key on the axial or on the boss can be seated. For this reason, the production process of key way cutting becomes complicated. If is necessary to simplify the process and we have developed a small practical machine for key way cutting. The machine is located on the carriage of the lathe. Using this small and practical key way machine, after operation the turing, you do not have to remove the workpiece from the chuck of the lathe to carry on the key seating process. The developed machine will save cutting time and the cost.

• 한국정밀공학회지
• /
• 제19권3호
• /
• pp.73-79
• /
• 2002

This paper presents the experimental results to verify the environmental consciousness with economic balances due to cutting fluid behaviors, effectiveness in machining process. Even though cutting fluid improves the Productivity through the cooling, lubricating effects, its environmental impact is also increased according to the cutting fluid usage. The primary mechanism considered in this study is the spin-off motion of fluids away from rotating workpiece. In this study some parameters arc adopted to analyze the productivity(tool wear), environmental impact(mist diffusion rate). The results present talc criteria for the resonable cutting fluid usage quantitative1y to develop the environmentally conscious machining process.

• 한국기계가공학회지
• /
• 제3권4호
• /
• pp.81-87
• /
• 2004

The titanium has many superior characteristics such as specific strength, heat resistance, corrosion resistance, organism compatibility, non-magnetic and etc. and their quantity are abundant. This study performed turning operation of Ti-6Al-4V alloy using the TiAlN coated tool which was treated with PVD. Experimental works were also executed to measure cutting force, chip figuration and surface roughness for different cutting conditions. As a result of study, tool wear was serious at the condition over 100m/min of cutting speed. The excellent cutting condition of cutting depth was at 1.0mm.

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 1991년도 춘계공동학술대회 발표논문 및 초록집; 전북대학교, 전주; 26-27 Apr. 1991
• /
• pp.254-260
• /
• 1991

본 연구는 CAD데이터로 부터 부품의 형상을 인식하여 CAD시스템과 인터페이스된 자동공정설계시스템을 지식공학적 접근방법을 도입하여 개발하고자 함이 연구의 목적이다. 연구의 대상은 NC선반가공용 회전형상부품을 대상으로 하며, CAD시스템은 AutoCAD를, 소프트웨어개발에 사용된 프로그래밍언어는 Turbo-C(Version 2.0)를, 전문가시스템셀(Expert System Shell)은 CLIPS를 이용하여 개인용컴퓨터(PC)를 사용하여 개발한다. 본 연구의 내용은 NC선반가공용 회전형상부품을 대상으로 CAD/CAPP 데이터베이스 생성과 부품형상인식, 공정 및 작업의 선정, 가공순서의 결정에 대한 알고리즘을 개발하고, 공학적 규칙 및 전문가의 경험적 지식을 획득하여 지식베이스를 구축하며, 이 지식베이스를 사용한 공정설계 전문가시스템의 개발에 관한 연구의 중간결과이다.

• 한국기계가공학회지
• /
• 제11권4호
• /
• pp.67-71
• /
• 2012

The purpose of this study is to investigate cutting characteristics and wear behavior in FCD500 ductile cast iron turning with different cutting tools, tungsten-carbide and CBN. Mechanical property, cutting characteristics and the application to the real industrial area is the final purpose. FDC500 ductile cast iron is now widely used in the various commercial vehicle parts for increased machine abilities which accrue more tensile strength with lower hardness. Several studies have been fulfilled for the material and heat-treatment area, but few with the cutting characteristics and wear behavior in the turning area.

• 한국기계가공학회지
• /
• 제11권2호
• /
• pp.171-176
• /
• 2012

So far, carbide insert production technology was carried out using a diamond grinding wheel. This production technology has problem that raise production costs and decrease in productivity. The SIDE PRESS method to solve this problem have been developed. In this paper, the machining characteristics of lateral chip breaker turning inserts produced by the SIDE PRESS method was studied. The cutting force and the resulting surface roughness were measured at various cutting conditions. The experimental results indicate that the chip breaker inserts of three-dimensional geometry is the best cutting performance.

• 한국정밀공학회지
• /
• 제20권2호
• /
• pp.50-57
• /
• 2003

This paper presents the experimental results to verify the atomization characteristics and environmental impact of cutting fluid. Even though cutting fluid improves the productivity through the cooling, Lubricating effects, environmental impact due to cutting fluid usage is also increased on factory shop floor Cutting fluid's aerosol via atomization process can be affected human health risk such as lung cancer and skin diseases. Experimental results show that the generated fine aerosol which particle size less than 10 micron appears near working tone under typical operational conditions. The aerosol concentration also exceeds NIOSH regulations. This research can be provided a basis of environmental impact analysis fur environmental consciousness.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1991년도 춘계학술대회 논문집
• /
• pp.328-333
• /
• 1991

가공 프로세스의 감시에 대한 많은 연구는 주로 과부하, 공구파손, 공구마멸, 채터링, 충돌 승을 대상으로 한 것으로, AE(Acoustic Emission), 모터전류, 절삭력, 진동, 절삭온 도 등의 신호를 감지한 뒤 이들 신호에 각종 신호 처리를 행하여 가공 상태에 대한 정보를 추출하고, 그것에 근거한 감시를 하고 있다. 작업중 감시연구에서 주로 제기 되는 문제는 공구교환이나 공작물 교환에 무관하게 또 작업에 지장을 주지 않으면서 이들 신호를 감지해야 하는 점과 감시처리의 신뢰성을 높여야 하는 점이다. 본 연구에서는 NC프로그램으로 부터 얻은 예측정보를 이용해서 선삭가공에서 감시 시스템의 성능향상을 시도 하였다. 예측정보는 감시코드의 형태로 각 NC블럭에 추가하여 실시간 감시에서 작업의 상태를 인식할 때 참고 정보로 활용하기 때문에 감시에 대한 신뢰성을 높일 수 있었다. 감시신호로는 이송축 직류 서보 모터의 전류를 사용하였다. 전체적인 감시 시스템의 프로그래밍 언어로는 C 를 사용하여, 실시간 감시처리를 가능하게 하였다.

• 한국기계가공학회지
• /
• 제11권6호
• /
• pp.69-74
• /
• 2012

Surface roughness is widely used as an index for processing degree of accuracy. Recently, regression analysis to predict the machining results are actively used to characterize a cutting operations. In the past, diamond machining had been used for ultra precision cutting operation, but now industrial diamond tools like PCD(Polycrystalline Diamond) have been widely used in ultraprecision machining of nonferrous metals. In this study, the authors focus on the effect of PCD tool property on the surface roughness of Al5083 aluminum alloy after cutting process by CNC operated lathe. Based on the regression analysis approach on a surface roughness data obtained by experiment, predictive analysis of surface roughness is effective to achieve better surface quality.

• 한국기계가공학회지
• /
• 제11권6호
• /
• pp.88-93
• /
• 2012

In this study, Machining fine shaft was examined by Lathe. method is proposed to control the thrust force to 0. through relationship between the cutting depth and the thrust force in turning, fine-shaft of less than 0.1mm diameter in turning is confirmed experimentally. also we propose practical expression to control thrust force in turning Through to change the approach angle, optimal tool design would be possible in turning.