Journal of the Korean Society of Manufacturing Process Engineers (한국기계가공학회지)

The Korean Society of Manufacturing Process Engineers (한국기계가공학회)
권호 표지

A Study on Cutting Characteristic in Turning Ductile Cast Iron(FCD500)

구상화 흑연주철(FCD500)의 가공성에 관한 연구

  • Oh, Sung-Hoon (Division of Mechanical System Engineering, Chon-buk National University) ;
  • Kim, Ho-Geon (Graduate School, Division of Mechanical System Engineering, Chon-buk National University)
  • Published : 2012.08.31
⟨ Previous Next ⟩

Abstract

The purpose of this study is to investigate cutting characteristics and wear behavior in FCD500 ductile cast iron turning with different cutting tools, tungsten-carbide and CBN. Mechanical property, cutting characteristics and the application to the real industrial area is the final purpose. FDC500 ductile cast iron is now widely used in the various commercial vehicle parts for increased machine abilities which accrue more tensile strength with lower hardness. Several studies have been fulfilled for the material and heat-treatment area, but few with the cutting characteristics and wear behavior in the turning area.

Keywords

References

  1. Cha-Hurn Bae, Woo-Chul Lee, Heung-Il Park, Hae-Yong Jeong, "Mechanical Properties of High Strength Ductile Cast Iron for Brake Caliper", Journal of the Korean Foundrymen's Society, 2008.
  2. A.G.Jaharah, Mohd Nor Azmi Mohd Rodzi, "Machinability of FCD500 Ductile Cast Iron using coated carbide tool in dry machining condition", International journal of Mechanical Engineering(IJMME) Vol. 4, 2009.
  3. Mehdi Remadna, Jean Francois Rigal, "Evolution During Time of Tool Wear and Cutting Forces in the Case of Hard turning with CBN Inserts", Journal of Materials Processing Technology, Vol. 178, No. 14, pp. 67-75, September, 2006.
  4. N. Fatahalla, S. Bahi, "Metallurgical parameters, mechanical properties and machinability of ductile cast iron", Journal of Materials science, Vol. 32, 1996.
  5. Hwan Tae Sung, Sang Ook An, "The Effect of Matrix of Nodular Graphite Cast Iron on Machinability in Lathe Turning", Transactions of the Korean Society of Mechanical Engineers(KSME), Vol. 10, No. 6, 1986.
  6. Young-Kyu Ju, Kyeong-hwan Choe, Sang-mok Lee, Myung-ho Kim, Sang-weon Yun, Kyong-whoan Lee, "Comparative Evaluation of the Characteristics of High Si-High Mo Ductile Cast Iron, High Si-High Mo C. V. Cast Iron and Ni-resist Cast Iron", Journal of the Korean Foundrymen's Society, Vol. 29, No. 3, 2009.
  7. Ki-Ju Lee, Tae-Young Kim, "A Study on Machinability Evaluation of SKD11 using CBN Tool", Precision Mechanical Engineering Graduate School ChonBuk National University, 2010.
  8. Jueng-Keun Ji, "Fatigue Fracture Behavior of Spheroidal Graphite Cast Iron FCD500 by Super-Rapid induction Quenching", Transactions of the Korean Society of Mechanical Engineers(KSME), 2002.