• Journal of Broadcast Engineering
• /
• v.25 no.1
• /
• pp.94-104
• /
• 2020

Currently media consumption over fixed/mobile Internet is mostly conducted by adaptive media streaming technology such as DASH (Dynamic Adaptive Streaming over HTTP), which is an ISO/IEC MPEG (Moving Picture Experts Group) standard, or some other technologies similar to DASH. All these heavily depend on the HTTP caches that ISPs (Internet Service Providers) are obliged to provide sufficiently to make sure fast enough Web services. As a result, as the number of media streaming users increases, ISPs' burden for HTTP cache has been greatly increased rather than CDN (Content Delivery Network) providers' server burden. Hence ISPs charge traffic cost to CDN providers to compensate for the increased cost of HTTP caches. Recently in order to reduce the traffic cost of CDN providers, P2P (Peer-to-Peer)-assisted DASH system was proposed and a peer selection algorithm that maximally reduces CDN provides' traffic cost was investigated for this system. This algorithm, however, tends to concentrate the burden upon the selected peer. This paper proposes a new peer selection algorithm that distributes the burden among multiple peers while maintaining the proper reduction level of the CDN providers' cost. Through implementation of the new algorithm in a Web-based media streaming system using WebRTC (Web Real-Time Communication) standard APIs, it demonstrates its effectiveness with experimental results.

• The KIPS Transactions:PartC
• /
• v.12C no.6 s.102
• /
• pp.933-940
• /
• 2005

As the appearance of very high speed telecommunication network, volume of network, is enlarged and complicated, management of the various network equipments and hosting systems become more complicated and significant. Recently, there have been various researches on network management system that is capable of managing and operating the network environment based on SNMP (Simple Network Management Protocol). SNMP has many advantages, which is easy to implement and has a simple structure. However, as the network structure has become more complicated, it has caused a number of problems like the increase of network load and limit of the network management scope in terms of the network expansion and efficiency. Especially, it needs expensive cost and time for developing a network because many network developers are almost depended manually for developing it till now. In this paper, we propose a framework for network management program that automates the generation of information for network management. The Proposed framework is able to automatically generate a network management program by using information related with equipments which were provided along with the network equipments and SNMP library Thus, we ill make not only the SNMP network structure expansion become easier but also errors maintaining and development time of the network management program were dramatically reduced by using generated network program through our proposed framework.

• Journal of KIISE:Computing Practices and Letters
• /
• v.9 no.1
• /
• pp.100-108
• /
• 2003

By choosing Multicast for transmission of educational contents in the Remote Educational System, we can reduce the server load and increase network bandwidth utilization. We design and implement Multicast Middleware for the Remote Educational System in this paper. There are three characteristics in this Multicast Middleware: 1) Through Centralized Multicast Group Management for passive members, it allows a host to make multicast group, which is composed of receivers, called Group Member and who are chosen by the host, called group Maker. Because, all groups are created by the Group Maker in Centralized Group Management, Group Member's join action will be passive 2) Maintenance and recovery of multicast group information in order to restore from exception and crash; the maintenance and recovery mechanism of Group Maker is distinct from that of Group Member. 3) The mechanism which enables to transmit large size multimedia data through multicasting and remove additional copy operation through shared buffer. Fragmentation/de-fragmentation for large data delivery results in additional copy operation in user level. But by using user level shared buffer, it can be done without user Bevel copy operation. By applying to Remote Educational environment which consists of 30 PCs and Fast Ethernet, we can examine the efficiency of this middleware, which can transmit 18frames/sec movie which resolution 320 $\times$ 120 pixels, 128Kbps encoded sound data and some text data.

• Progress in Medical Physics
• /
• v.12 no.2
• /
• pp.125-131
• /
• 2001

We was investigate the dosimetric characteristics of the virtual wedge and it compared to the conventional fixed wedge. Also we was evaluate the quality factor of the experimental multi-channel dosimetry system for virtual wedge. Recently virtual wedge technique and wedge fraction methods are available through the computer controlled asymmetric collimator or the independent jaw in medical linear accelerator for radiation therapy. The dosimetric characteristics are interpreted by radiation field analyzer RFA-7 system and PTW-UNIDOS system. Experimental multi-channel dosimetry system for virtual wedge was consists of the electrometer, the solid detector and array phantom. The solid detectors were constructed using commercially diodes for the assessment of quality assurance in radiotherapy. And it was used for the point dose measuring and field size scanning. The semiconductor detector and ion chamber were positioned at a dmax, 5 cm, 10 cm, 20 cm depth and its specific ratio was determined using a scanning data. Wedge angles in fixed and virtual type are compared with measurements in water phantom and it is shown that the wedge angle 15$^{\circ}$, 30$^{\circ}$, 45$^{\circ}$were agree within 1$^{\circ}$ degree in 6, 10 MV photon beams. In PDD and beam flatness, experimental multi-channel disimetry system was capable of reproduceing the measured values usually to within $\pm$2.1% the statistical uncertainties of the data. It was used to describe dosimetric characteristics of virtual wedge in clinical photon beams. Also we was evaluate optimal use of the virtual wedge and improve the quality factor of the experimental multi-channel dosimetry system for virtual wedge.

• Clean Technology
• /
• v.18 no.3
• /
• pp.301-306
• /
• 2012

Rapidly growing mobile machines such as tablet PC and smart phone are equipped with touch screen panel using a sturdy material for products surface protection. Therefore, surge of chemically strengthened glass was increased and the amount of waste matter is proportional to demand. The purpose of this study is environmental impact assessment on touch screen panel of chemically strengthened glass by material life cycle assessment (MLCA). We used CES of Granta, SimaPro and Gabi software for MLCA. Chemically strengthened glass (2.7, 5.7 and 10.3 inch) was calculated to environmental impact assessment by Granta software under two cases. One case is Landfill and the other case is Reuse. As a result, in case of reuse, energy values of 2.7, 5.7 and 10.3 inches were reduced by an average of 51.4%, $CO_2$ values were reduced by an average of 46.6% than Landfill case, respectively. We assessed impact categories of 11 types using SimaPro software. As a result, the contents of fossil fuels, inorganics and climate change have a huge impact than the other impact categories. And the main cause of environmental impact is antimony and hydrogen fluoride in Gabi results.

• Journal of Life Science
• /
• v.19 no.8
• /
• pp.1159-1163
• /
• 2009

It has been postulated that endoplasmic (ER) stress is involved in the development of several diseases. However, the detailed molecular mechanisms have not been fully understood. Therefore, we characterized a genetic network of genes induced by ER stress using cDNA microarray and gene set expression coherence analysis (GSECA), and identified gene function as well as several transcription regulators associated with ER stress. We analyzed time-dependent gene expression profiles in thapsigargin-treated Sk-Hep1 using an oligonucleotide expression chip, and then selected functional gene sets with significantly high expression coherence which was processed into functional clusters according to the expression similarities. The functions related to sugar binding, lysosome, ribosomal protein, ER lumen, and ER to golgi transport increased, whereas the functions with mRNA processing, DNA replication, DNA repair, cell cycle, electron transport chain and helicase activity decreased. Furthermore, functional clusters were investigated for the enrichment of regulatory motifs using GSECA, and several transcriptional regulators associated with regulation of ER-induced gene expression were found.

• Microbiology and Biotechnology Letters
• /
• v.16 no.5
• /
• pp.335-342
• /
• 1988

An anion exchange chromatography was employed for the purification of mouse monoclonal antibodies from ascitic fluid and in vitro cultivation media. After cultivation of hybridomas, Alps 25-3, HCGK, A4W, and KW, producing IgG1, the culture supernatants were harvested by centrifugation, precipitated with 50-60％ ammonium sulfate, and dialyzed against 0.025 M Tris-HCI buffer (pH 8.2). Then the dialyzed samples were loaded into a DEAE-Trisacryl M anion exchange column. Monoclonal antibodies bound to the DEAE-Trisacryl M were eluted with 0.025 M Tris-HCI buffer (pH 8.2) containing 30-40 mM NaCl. In ammonium sulfate precipitation, the recovery of the monoclonal antibody was shown to be 90％ and 84％ from in vitro culture media containing 10％ and 2％ fetal bovine serum, respectively. On the other hand, the pretreatment by ultrafiltration enhanced the yield up to 91％ whereas the purity was lower than that by ammonium sulfate treatment. Subsequently, in the DEAE-Trisacryl M chromatographic separation, the purities and recoveries of all the monoclonal antibodies from both the in vitro culture supernatants and ascitic fluids were 70-80％ and 65％ respectively. The monoclonal antibody, Alps 25-3 could be further purified with a purity of 95％ through an immunoadsorbent chromatography.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.7 no.2
• /
• pp.78-86
• /
• 2004

Recently GPS and mobile GIS technologies based on LBS(location based service) have played an important role as DSS(decision supporting system) for domestic forest fire extinguishment policies. In this study forest fire extinguishments information management system based on mobile GIS technique was designed to seize the exact location on wireless network so that it helps to guide the safe and efficient extinguishments affairs and provide the extinguishments environment toward ground fighting teams and the central forest government in real time. Moreover, possibly to operate this system, the foundation technologies by the name of '.gci' such as the spatial data compression method, the spatial data transmission method over wireless network and the spatial analysis interface on PDA should be mainly considered. Especially, in this study the spatial data compression method having high compression rate from 51% to 62% for each polygon, line, and point data, without the loss of data was developed.

• Journal of Korea Water Resources Association
• /
• v.47 no.5
• /
• pp.483-490
• /
• 2014

The design procedures for a biological reactor and a secondary settling tank (SST) of an activated sludge system are based on the steady state design method (Ekama et al., 1986; WRC, 1984) and the 1-D flux theory design method (Ekama et al., 1997), respectively. This study combined both of the design procedures, to determine the optimum sludge concentration in the reactor and the best design with the lowest cost. The best design of the reactor volume and the SST diameter at the optimum sludge concentration were specified with varying wastewater and sludge characteristics, temperature, sludge retention time (SRT) and peak flow rate. The effects of the influent wastewater characteristics, such as substrate concentration and unbiodegradable particulate fraction, were found to be considerable, but the effect of unbiodegradable soluble fraction was to be negligible. The effects of sludge settling characteristics, were also significant. SRT, as an operating parameter, was found to be an important factor for determining the optimum sludge concentration. However, the effect of temperature was found to be small. Furthermore, for designing a large scale wastewater treatment plant, the number of reactors or SSTs could be estimated, by dividing the total reactor volume or SST area. The new combined design procedure, proposed in this research, will be able to allow engineers to provide the best design of an activated sludge system with the lowest cost.

• Clean Technology
• /
• v.18 no.1
• /
• pp.69-75
• /
• 2012

In this study, we executed an environmental impact assessment about recycling of ITO (Indium Tin Oxide), used for touch panel. ITO is mainly used to make transparent conductive coatings for touch and flat screen LCD (Liquid Crystal Display), ELD (Emitting Light Device), PDP (Plasma Display Panel). This demand is increasing little by little. but form current status, ITO is discarded than recycling. It is important to recycling ITO for national strategies about resource conservation, and reduce environmental burden. Also Landfill or incineration of ITO cloud be harmful to the human health in the long-term. Material Life Cycle Assessment method (MLCA) was conducted for comparison landfill and recycling of ITO. MLCA would provide more information for environmental issues and potential environmental impacts of ITO. The study includes two scenarios, the basic scenario is recycling of ITO (10, 20, 30%) and the other scenario is landfill of ITO. In addition, amount of carbon dioxide and energy were calculated.