• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2023.05a
• /
• pp.134-136
• /
• 2023

대형 컨테이너 선박의 주요 제원 예측에 관한 과거 연구는 단순 회귀분석에 기반한 결과로 제시되었으며, 이를 현재 운항 중인 24,000TEU급 선박의 제원과 과거의 연구 결과를 비교할 경우, 선박의 전장이 과대 예측한 경향이 있었다. 본 연구에서는 선형회귀분석 및 box plot의 통계 분석기법을 활용하여 최근 20년의 신조 컨테이너선을 대상으로 연도별 주요제원의 변화량을 통해 선박의 대형화 추세를 분석하였다. 그 결과, 컨테이너선의 대형화는 시간의 흐름에 따라 점점 폭이 넓어지는 형태로 변화하고 있는 것으로 분석되었다. 그러나 선폭 위주의 대형화는 선박 운항의 측면에서 조종성능의 감소로 인해 운항난이도가 증대된다는 단점이 있다. 즉, 미래 대형화 선박을 안전하게 운항하기 위해서는 적절한 항만 인프라 구축 및 선박길이와 폭의 조화를 이루는 대형화가 필요할 것으로 판단된다.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2021.11a
• /
• pp.226-227
• /
• 2021

항만 및 부대 시설은 건설 계획이 마련되고 실제 건설이 이루어지기까지 5~10년 이상의 시일이 소요되는 사업으로, 해당 계획이 진행될 당시의 선박의 제원을 바탕으로 마련될 경우 실제 시설의 건설이 완료되고 운영 시 선박의 대형화, 주요 제원의 변경 등을 반영하지 못하고 있다. 특히 항만의 경쟁력 확보를 위하여 향후 항만의 통항 선박에 직접적인 영향을 미치는 교량의 형하고, 통항로를 교차하는 형태의 항공기 운항 등 시설물의 계획 시 장래 추정되는 선박의 제원이 고려되어야 한다. 본 연구는 과거 컨테이너 선박의 제원 변화를 추세분석하였고, 주요 항로에 존재하는 교량의 형하고 등을 분석하여 현재 빠르게 진행되고 있는 컨테이선 선박의 대형화를 분석하고, 항만 및 부대 시설 건설 시 고려해야할 기간 기준 마련의 필요성 및 그에 따른 장래 선박의 제원을 추정하여 제안하였다.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2007.12a
• /
• pp.266-268
• /
• 2007

최근 국내의 각 주요 항만 내 ${\cdot}$ 외에 대형 해상교량이 건설되었거나 건설 진행 중이다. 해상교량 중 주로 선박통항이 빈번한 항로부근에 설치되어 선박통항안전성에 밀접한 관련이 있는 교량이나, 항내의 접안시설과 항만 기반 시설에 근접하여 설치된 교량은 선박의 통항 안전성에 직접적인 영향을 미치며, 더 나아가 항만 운영 효율성에 영향을 줄 수 있으므로, 이러한 해상교량에 대한 현황 및 주요 제원을 조사 분석하고자 한다. 특히 선박 통항안전성에 직접적인 영향을 주는 요소인 주경간장, 형하고 등의 주요제원을 결정하게 되는 요인에 대하여 분석한다.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.23 no.6
• /
• pp.652-660
• /
• 2017

Recently, the number of tourists using cruise ships in Korea is increasing. and an big cruise ship with an gross tonnage of 160,000 tons or more has entered the domestic ports. Therefore, the government has been making a lot of efforts to confirm the cruise infrastructure for revitalization of the domestic cruise industry. However, there are no standards for cruise ship specifications and water facilities in the domestic port and fishery design standards. Currently, construction of dedicated cruise facilities is under way in major domestic ports. However, due to lack of specifications and domestic standards for cruise ships, it is difficult to design and license special facilities. Therefore, in this study, PIANC rule and domestic harbor and designing standard of fishing port were compared and analyzed in order to present the standard specification of cruise ships. And analyzed the representative linearity of cruises currently being operated. As a result of the ship characteristics analysis, There was a difference in coastal passenger ship in specifications and ship maneuverability. Therefore, in order to design facilities dedicated to cruising, the specifications of the target ship must be included in the domestic design standard. In addition, in order to calculate the scope of the target ship, I applied the coverage rate of 75% to the average specification value of the cruise ship and presented the standards of the cruise ship and the standard of the water area facilities.

• Journal of Korea Ship Safrty Technology Authority
• /
• s.32
• /
• pp.30-45
• /
• 2012

본 연구는 국내 보급을 위한 해양레저용 모터보트 개발을 목표로 하여 모터보트 개발 전과정에 대한 기반기술을 구축하고자 한다. 이번 호에서는 해양레저에 대한 국내외현황 및 보급을 위한 국내 선호도 조사결과, 개발선의 주요제원의 선정, 선형설계, 모형시험 및 특허출원에 대한 부분에 대해 기술하였다.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.6
• /
• pp.856-866
• /
• 2021

The increasing international awareness regarding air pollutant reduction has resulted in increasing demand for eco-friendly ships; hence, electric ships are being actively developed by various countries. Presently, studies on electric ships are mainly focused on electric propulsion systems and electric motors. However, from the ship perspective, there are no studies on conceptual designs for coastal car ferries powered by removable power supply systems. In the present study, the main research consideration is regarding the conceptual design of a fully electrified car ferry using a battery-based removable system as the main power source. By analyzing the dimensions of more than 100 domestic coastal car ferries, the main criteria satisfying the requirements for developing a suitable vessel were derived, and a study on intact/damage stability was conducted considering the application of a removable battery truck. Further analyses of the problems concerning the conceptual design were also performed to derive solutions.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.14 no.1
• /
• pp.32-39
• /
• 2011

When the laws about the security of ships are revised, or voyage conditions are changed, ship owners have converted rather than built new passenger ships including cruise ships recently. As conversion causes a lot of changes in principal dimension, structural strength, hydrodynamic performance, the number of passengers, and cargo capacity, detailed pre-review is needed. But any studies on conversion have not been carried out yet, this study investigated and analyzed the trend of consulting companies' reports (Delta Marine Report, 2005, 2008). As a result, it was found that lengthening conversion brought about the main changes in principal dimension, and performance. Also it was suggested that there be factors for consideration like hull scantling, hull form, and cutting point to minimize side effects when ship owners build ships having lengthening conversion in mind.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.19 no.2
• /
• pp.164-170
• /
• 2013

With the introduction of increasingly large-sized ships, the conditions of main domestic port facilities remain the same as in the past. So, there is high probability that marine traffic congestion can occur at the certain ship's routes. The standard ship's length used to assess the marine traffic congestion of domestic trade port is 70 meters. It has been in use for the last 30 years, so, its usefulness is highly recommended for review. This study deeply analyzes the tendency of ship's dimensional changes according to recent enlargement of ship's size by utilizing the particulars of 60,000 ships saved in domestic Port-MIS database and suggests the standard ship's length by figuring out the correlation between length of ship and gross tonnage. In addition, the basis of statistical data on the ship's tonnage in domestic trade over the last five years suggests the standard ship's length by deriving the reference point of cumulative incidences that occupy more than over 50 %, except for small vessels. It is necessary to consider the characteristic of each domestic trade port before the actual application of suggested standard ship's length.

• Journal of Korea Port Economic Association
• /
• v.39 no.3
• /
• pp.47-60
• /
• 2023

A thorough inventory of ship emissions, particularly ship's emission of in-port area is necessary to identify significant sources of exhaust gases such as NOx, SOx, PM, and CO₂ and trends in emission levels over time, and reduce their serious effects on the environment and human health. Therefore, the goal of this study is to assess the volume of emissions from ships in Mokpo port, which serves as a gateway to the southwest coast of Korea, using a bottom-up methodology and data from the automatic identification system (AIS) and the Korean Port Management Information System (Port-MIS). In this work, an analysis of ship movement utilizing AIS data and an actual set of data on ship specification were gathered. By examining ship movement using AIS data, We also proposed a new approach for identifying cruising/maneuvering mode. Finally, the results were classified by ship operating mode, by exhaust gas, by ship type, and by berth, which provides a thorough and in-depth analysis of the air pollution caused by ships in Mokpo port.

• Journal of the Society of Naval Architects of Korea
• /
• v.32 no.4
• /
• pp.19-26
• /
• 1995

The assessment of maneuverability of a ship is very important from the view point of safety of human beings and of pollution of ocean. And, it is quite natural that every ship yard wants to have some tools with which they can build a ship with good maneuverability. But, maneuvarability of a ship is very subtle problem, and to calculate the exact maneuvering motion, lots of captive model tests must be carried out. Futhermore, in the initial design stage we can not make the scale model, because the lines of a ship is not fixed. In this paper, some approximate method to calculate the maneuvering motion of a ship, with the principal dimensions of hull, and propeller, rudder characteristics only, is studied. And, proposed approximate method is used to calculate the turning and zig-zag maneuver of several ships. The results of those calculations and the usability of the method are discussed.