• Journal of Korean Port Research
• /
• v.7 no.2
• /
• pp.61-68
• /
• 1993

Studies on the ship's automatic navigation & berthing control have been continued by way of solving the ship's mathematical model, but the results of such studies have not reached to our satisfactory level due to its non-linear characteristics at low speed. In this paper, the authors propose a new control system which can evaluate as closely as captain's decision-making by using the FNN(Fuzzy Neural Network) controller which can simulate captain's knowledge. This controller contains the concept of safety according to channel width. The learning data are drawn from ship Handling simulator(NavSim NMS-90 MK III) and represent the ship motion characteristics internally. According to learning procedure, the FNN controller can tune membership functions and identify fuzzy control rules automatically. The verified results show that the FNN controller is effective to incorporate captain's knowledge and experience of manoeuvrability in channel.

• Journal of Korean Port Research
• /
• v.5 no.2
• /
• pp.39-63
• /
• 1991

A PC-based ship maneuvering simulator was developed which was configured in a high performance IBM PC compatible i486 and i286 computer with a TMS 340 graphic signal processor and 10 MBPS Ethernet Cards. A real-time ship maneuvering simulation program was developed which includes computer generated imagery (CGI) for bird's eye view type and perspective view type. The simulator H/W was designed and manufactured and S/W for interface of various navigation equipments was made Especially, programs for output, analysis, and assessment of simulations results were developed. Communications between PC's are made by using Ethernet bus type LAN system. Simulations could be performed under various environments (current, wind, wave etc.) using data base of harbors and ships. This system can be used for various purposes such as crew's training, harbor and waterway design, and assessment of ship maneuverability in harbor.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2023.05a
• /
• pp.176-177
• /
• 2023

최근 해양자원 및 산업개발, 해양관광산업 등의 발달로 바다에 대한 관심은 더욱 증가하고 있으며 국가 간 경쟁도 나날이 치열해지고 있어, 바다를 무대로 활동하는 해양경찰의 중요성은 더욱 커지고 있다. 해양경찰의 가장 중요한 임무는 해양에서 국민의 소중한 생명과 재산을 보호하는 것이다. 이를 위해서는 경비함정을 안전하게 운항하는 것이 가장 중요하다. 경비함정을 안전하게 운항하기 위해서는 선박운용에 필수인 항해기초 항해학, 연안항법, 전파 및 레이다 항법, 항해계기, 해상기상, CORLEG(항법), 함정운용, 함정조종론, 해사일반(함정의 감항성), 해사영어(SMCP), VTS 교육과 SHS를 활용한 함정운항 심화 교육인 선위측정(GPS 및 레이다이용), CBT 실습(항해장비 운용법, 조함 명령법), 시뮬레이션 MOCK-UP 실습(상황별 항해실습, 자기주도실습, 함정운용술 고도화)과 더불어 함정의 비상상황에 대비한 교육 및 다양하고 심도 있는 항해 전문화 교육이 필요하다.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.2
• /
• pp.253-259
• /
• 2018

In February 2014, the rudder upper stock and the nut of a passenger ship were released and an accident occurred. That accident occurred because the steering gear of passenger ships that was intended to move many passengers. The accidents due to steering gear was zero according to 2010-2016 statistics. There is no rules prevent loosening of the upper rudder nut in "Ship Safety Act" and "Structural standard of steel ship". Since the accident, the Korea register has been revised to the joining method in Part 5 Chapter 7 of the rules in the classification of steel ships. In the field survey of 12 passenger ships operating on Mokpo and surrounding islands, the welding method was applied in the cases as the fastening method. The fastening type was equipped with two C-type structures. It was structured to be difficult to access. The NAS 3350 test was conducted to investigate ways to prevent homologous accident considering the characteristic of passenger ships that need to lift or unload rides once a year.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.2
• /
• pp.821-828
• /
• 2011

This paper developed the algorithm for improving the performance the auto pilot in the autonomous vehicle system consisting of the Track keeping control, the Automatic steering, and the Automatic mooring control. The automatic steering is the control device that could save the voyage distance and cost of fuel by reducing the unnecessary burden of driving due to the continuous artificial navigation, and avoiding the route deviation. During the step of the ship autonomic navigation control, since the wind power or the tidal force could make the ship deviate from the fixed course, the automatic steering calculates the difference between actual sailing line and the set course to keep the ship sailing in the vicinity of intended course. first, we could get the transfer function for the modeling of ship according to the Nomoto model. Considering the maneuverability, we propose it as linear model with only 4 degree of freedoms to present the heading angle response to the input of rudder angle. In this paper, the model of ship is derived from the simplified Nomoto model. Since the proposed model considers the maximum angle and rudder rate of the ship auto pilot and also designs the Fuzzy controller based on existing PID controller, the performance of the steering machine is well improved.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.23 no.6
• /
• pp.652-660
• /
• 2017

Recently, the number of tourists using cruise ships in Korea is increasing. and an big cruise ship with an gross tonnage of 160,000 tons or more has entered the domestic ports. Therefore, the government has been making a lot of efforts to confirm the cruise infrastructure for revitalization of the domestic cruise industry. However, there are no standards for cruise ship specifications and water facilities in the domestic port and fishery design standards. Currently, construction of dedicated cruise facilities is under way in major domestic ports. However, due to lack of specifications and domestic standards for cruise ships, it is difficult to design and license special facilities. Therefore, in this study, PIANC rule and domestic harbor and designing standard of fishing port were compared and analyzed in order to present the standard specification of cruise ships. And analyzed the representative linearity of cruises currently being operated. As a result of the ship characteristics analysis, There was a difference in coastal passenger ship in specifications and ship maneuverability. Therefore, in order to design facilities dedicated to cruising, the specifications of the target ship must be included in the domestic design standard. In addition, in order to calculate the scope of the target ship, I applied the coverage rate of 75% to the average specification value of the cruise ship and presented the standards of the cruise ship and the standard of the water area facilities.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.32 no.4
• /
• pp.363-371
• /
• 1996

The Steering and Sailing Rules of International Regulations for Preventing Collisions at Sea now in use direct the best aid - action to avoid collision by the stand - on vessel. But these rules do not refer to the safety relative distance between two vessels when she should take such action. In this paper, the author analyzed the ship's collision avoiding actions from the viewpoint of ship motions and worked out mathematical formulas to calculate the relative distances necessary for taking action to avoid collision. Figuring out the values of maneuvering indices through experiments of 11 actual ships of small, medium, large and mammoth size, the author applied these values to the calculating formulas and calculated the minimum relative distances. The main results are as follows: 1. It was confIrmed that the stand - on vessel should keep the greatest relative distance for taking best aid - action to avoid collision when the cross angle of course was $90^{\circ}$ and near it(70-$90^{\circ}$ ). 2. When the cross angle of course was $90^{\circ}$ , the minimum relative distance of small vessel(GT: 160-650tons) was found to be more than about 6.8 times of her own length, and those of medium(GT : 2,300-3,500tons), large(GT : 22,OOO-62,OOOtons) and mammoth(GT : 91,000-139,000tons) vessels were found to be more than about 9.0 times, about 5.4 times and about 6.8 times of their own lengths. 3. It was confIrmed that collision danger was greater when crossing angle was obtuse than in an acute angle, therefore greater relative distance was to be kept by the stand - on vessel for taking best aid - action to avoid collision in the case of the obtuse angle. 4. In every vessels, in the case of $90^{\circ}$ cross angle of course the safety minimum relative distance was found to be more than about 9.0 times of their own lengths.

• Journal of the Society of Naval Architects of Korea
• /
• v.55 no.4
• /
• pp.350-360
• /
• 2018

Analysis of ship's manoeuverability in shallow water is an important task from the perspective of the vessels' navigational safety. Since the number of ships operated in restricted water has increased due to the enlargement of vessels and ships represent different characteristics of the manoeuverability when operated in shallow and deep water, it is significant to evaluate ship manoeuverability at initial design stage. At the initial stage of design, the estimation of manoeuverability is generally performed with hydrodynamic coefficients estimated based on empirical formula. However, the accuracy of estimating hydrodynamic coefficients by the empirical formula in shallow water is poor compared to that in deep water. Therefore, the error in the estimation of manoeuverability increases in shallow water. In this study, CFD is proposed to improve the accuracy of manoeuverability in shallow water at the initial design stage and hydrodynamic coefficients were obtained based on PMM test in shallow water. Furthermore, the ship manoeuverability was estimated both the proposed strategy and the empirical formula. At last, validity of the proposed strategy using CFD for the estimation of manoeuverability was confirmed by comparison with the manoeuverability estimation results from model test.

• Journal of the Society of Naval Architects of Korea
• /
• v.53 no.3
• /
• pp.217-227
• /
• 2016

Recent accidents of crude oil tankers have resulted in sinking, grounding of vessels and significant levels of marine pollution. Therefore, International Maritime Organization (IMO) has been strengthening the regulations of ship maneuvering performance in MSC 137. The evaluation of maneuvering performance can be made at the early design stage; it can be investigated numerically or experimentally. The main objective of this paper was to investigate the maneuvering performance of a VLCC due to the increase of rudder force at an early design stage for low speed in shallow water conditions. It was simulated in various operating condition such as deep sea, shallow water, design speed and low speed by using the numerical maneuvering simulation model, developed using MMG maneuvering motion equation and KVLCC 2 (SIMMAN 2008 workshop). The effect of increasing the rudder force can be evaluated by using numerical simulation of turning test and ZIG-ZAG test. The research showed that, increasing the rudder force of a VLCC was more effective on improving the turning ability than improving the course changing ability especially. The improvement of turning ability by the rudder force increasing is most effective when the ship is sailing in shallow water at low forward speed.

• Journal of the Society of Naval Architects of Korea
• /
• v.38 no.4
• /
• pp.30-38
• /
• 2001

The current is considered in the conventional manoeuvering equation. This equation is represented as the nonlinear state and measurement equations in which external forces and the direction and the velocity of current are augmented as that variables. The external forces are modeled as the third-order Gauss-Markov processes and the direction and the velocity of current are assumed to be constant. The augmented state variables are estimated with extended Kalman-Bucy filter and the fixed-interval smoother. While Hwang estimated motion state variables, hydrodynamic coefficients and the current variables simultaneously by using extended Kalman filter, external forces of surge, sway and yaw and the direction and the velocity of current are the only parameters to be estimated in the estimation-before-modeling method. The current variables are satisfactorily estimated in simulation process where the measurement noise is present.